The Global Market for Bio-based and Sustainable Materials 2024-2035

2.1 Definition of Sustainable and Biobased Materials
2.2 Importance and Benefits of Biobased and Sustainable Materials

3.1 BIOREFINERIES
3.2 BIO-BASED FEEDSTOCK AND LAND USE
3.3 PLANT-BASED
3.3.1 STARCH
3.3.1.1 Overview
3.3.1.2 Sources
3.3.1.3 Global production
3.3.1.4 Lysine
3.3.1.4.1 Source
3.3.1.4.2 Applications
3.3.1.4.3 Global production
3.3.1.5 Glucose
3.3.1.5.1 HMDA
3.3.1.5.1.1 Overview
3.3.1.5.1.2 Sources
3.3.1.5.1.3 Applications
3.3.1.5.1.4 Global production
3.3.1.5.2 1,5-diaminopentane (DA5)
3.3.1.5.2.1 Overview
3.3.1.5.2.2 Sources
3.3.1.5.2.3 Applications
3.3.1.5.2.4 Global production
3.3.1.5.3 Sorbitol
3.3.1.5.3.1 Isosorbide
3.3.1.5.3.1.1 Overview
3.3.1.5.3.1.2 Sources
3.3.1.5.3.1.3 Applications
3.3.1.5.3.1.4 Global production
3.3.1.5.4 Lactic acid
3.3.1.5.4.1 Overview
3.3.1.5.4.2 D-lactic acid
3.3.1.5.4.3 L-lactic acid
3.3.1.5.4.4 Lactide
3.3.1.5.5 Itaconic acid
3.3.1.5.5.1 Overview
3.3.1.5.5.2 Sources
3.3.1.5.5.3 Applications
3.3.1.5.5.4 Global production
3.3.1.5.6 3-HP
3.3.1.5.6.1 Overview
3.3.1.5.6.2 Sources
3.3.1.5.6.3 Applications
3.3.1.5.6.4 Global production
3.3.1.5.6.5 Acrylic acid
3.3.1.5.6.5.1 Overview
3.3.1.5.6.5.2 Applications
3.3.1.5.6.5.3 Global production
3.3.1.5.6.6 1,3-Propanediol (1,3-PDO)
3.3.1.5.6.6.1 Overview
3.3.1.5.6.6.2 Applications
3.3.1.5.6.6.3 Global production
3.3.1.5.7 Succinic Acid
3.3.1.5.7.1 Overview
3.3.1.5.7.2 Sources
3.3.1.5.7.3 Applications
3.3.1.5.7.4 Global production
3.3.1.5.7.5 1,4-Butanediol (1,4-BDO)
3.3.1.5.7.5.1 Overview
3.3.1.5.7.5.2 Applications
3.3.1.5.7.5.3 Global production
3.3.1.5.7.6 Tetrahydrofuran (THF)
3.3.1.5.7.6.1 Overview
3.3.1.5.7.6.2 Applications
3.3.1.5.7.6.3 Global production
3.3.1.5.8 Adipic acid
3.3.1.5.8.1 Overview
3.3.1.5.8.2 Applications
3.3.1.5.8.3 Caprolactame
3.3.1.5.8.3.1 Overview
3.3.1.5.8.3.2 Applications
3.3.1.5.8.3.3 Global production
3.3.1.5.9 Isobutanol
3.3.1.5.9.1 Overview
3.3.1.5.9.2 Sources
3.3.1.5.9.3 Applications
3.3.1.5.9.4 Global production
3.3.1.5.9.5 p-Xylene
3.3.1.5.9.5.1 Overview
3.3.1.5.9.5.2 Sources
3.3.1.5.9.5.3 Applications
3.3.1.5.9.5.4 Global production
3.3.1.5.9.5.5 Terephthalic acid
3.3.1.5.9.5.6 Overview
3.3.1.5.10 1,3 Proppanediol
3.3.1.5.10.1 Overview
3.3.1.5.10.2 Sources
3.3.1.5.10.3 Applications
3.3.1.5.10.4 Global production
3.3.1.5.11 Monoethylene glycol (MEG)
3.3.1.5.11.1 Overview
3.3.1.5.11.2 Sources
3.3.1.5.11.3 Applications
3.3.1.5.11.4 Global production
3.3.1.5.12 Ethanol
3.3.1.5.12.1 Overview
3.3.1.5.12.2 Sources
3.3.1.5.12.3 Applications
3.3.1.5.12.4 Global production
3.3.1.5.12.5 Ethylene
3.3.1.5.12.5.1 Overview
3.3.1.5.12.5.2 Applications
3.3.1.5.12.5.3 Global production
3.3.1.5.12.5.4 Propylene
3.3.1.5.12.5.5 Vinyl chloride
3.3.1.5.12.6 Methly methacrylate
3.3.2 SUGAR CROPS
3.3.2.1 Saccharose
3.3.2.1.1 Aniline
3.3.2.1.1.1 Overview
3.3.2.1.1.2 Applications
3.3.2.1.1.3 Global production
3.3.2.1.2 Fructose
3.3.2.1.2.1 Overview
3.3.2.1.2.2 Applications
3.3.2.1.2.3 Global production
3.3.2.1.2.4 5-Hydroxymethylfurfural (5-HMF)
3.3.2.1.2.4.1 Overview
3.3.2.1.2.4.2 Applications
3.3.2.1.2.4.3 Global production
3.3.2.1.2.5 5-Chloromethylfurfural (5-CMF)
3.3.2.1.2.5.1 Overview
3.3.2.1.2.5.2 Applications
3.3.2.1.2.5.3 Global production
3.3.2.1.2.6 Levulinic Acid
3.3.2.1.2.6.1 Overview
3.3.2.1.2.6.2 Applications
3.3.2.1.2.6.3 Global production
3.3.2.1.2.7 FDME
3.3.2.1.2.7.1 Overview
3.3.2.1.2.7.2 Applications
3.3.2.1.2.7.3 Global production
3.3.2.1.2.8 2,5-FDCA
3.3.2.1.2.8.1 Overview
3.3.2.1.2.8.2 Applications
3.3.2.1.2.8.3 Global production
3.3.3 LIGNOCELLULOSIC BIOMASS
3.3.3.1 Levoglucosenone
3.3.3.1.1 Overview
3.3.3.1.2 Applications
3.3.3.1.3 Global production
3.3.3.2 Hemicellulose
3.3.3.2.1 Overview
3.3.3.2.2 Biochemicals from hemicellulose
3.3.3.2.3 Global production
3.3.3.2.4 Furfural
3.3.3.2.4.1 Overview
3.3.3.2.4.2 Applications
3.3.3.2.4.3 Global production
3.3.3.2.4.4 Furfuyl alcohol
3.3.3.2.4.4.1 Overview
3.3.3.2.4.4.2 Applications
3.3.3.2.4.4.3 Global production
3.3.3.3 Lignin
3.3.3.3.1 Overview
3.3.3.3.2 Sources
3.3.3.3.3 Applications
3.3.3.3.3.1 Aromatic compounds
3.3.3.3.3.1.1 Benzene, toluene and xylene
3.3.3.3.3.1.2 Phenol and phenolic resins
3.3.3.3.3.1.3 Vanillin
3.3.3.3.3.2 Polymers
3.3.3.3.4 Global production
3.3.4 PLANT OILS
3.3.4.1 Overview
3.3.4.2 Glycerol
3.3.4.2.1 Overview
3.3.4.2.2 Applications
3.3.4.2.3 Global production
3.3.4.2.4 MPG
3.3.4.2.4.1 Overview
3.3.4.2.4.2 Applications
3.3.4.2.4.3 Global production
3.3.4.2.5 ECH
3.3.4.2.5.1 Overview
3.3.4.2.5.2 Applications
3.3.4.2.5.3 Global production
3.3.4.3 Fatty acids
3.3.4.3.1 Overview
3.3.4.3.2 Applications
3.3.4.3.3 Global production
3.3.4.4 Castor oil
3.3.4.4.1 Overview
3.3.4.4.2 Sebacic acid
3.3.4.4.2.1 Overview
3.3.4.4.2.2 Applications
3.3.4.4.2.3 Global production
3.3.4.4.3 11-Aminoundecanoic acid (11-AA)
3.3.4.4.3.1 Overview
3.3.4.4.3.2 Applications
3.3.4.4.3.3 Global production
3.3.4.5 Dodecanedioic acid (DDDA)
3.3.4.5.1 Overview
3.3.4.5.2 Applications
3.3.4.5.3 Global production
3.3.4.6 Pentamethylene diisocyanate
3.3.4.6.1 Overview
3.3.4.6.2 Applications
3.3.4.6.3 Global production
3.3.5 NON-EDIBIBLE MILK
3.3.5.1 Casein
3.3.5.1.1 Overview
3.3.5.1.2 Applications
3.3.5.1.3 Global production
3.4 WASTE
3.4.1 Food waste
3.4.1.1 Overview
3.4.1.2 Products and applications
3.4.1.2.1 Global production
3.4.2 Agricultural waste
3.4.2.1 Overview
3.4.2.2 Products and applications
3.4.2.3 Global production
3.4.3 Forestry waste
3.4.3.1 Overview
3.4.3.2 Products and applications
3.4.3.3 Global production
3.4.4 Aquaculture/fishing waste
3.4.4.1 Overview
3.4.4.2 Products and applications
3.4.4.3 Global production
3.4.5 Municipal solid waste
3.4.5.1 Overview
3.4.5.2 Products and applications
3.4.5.3 Global production
3.4.6 Industrial waste
3.4.6.1 Overview
3.4.7 Waste oils
3.4.7.1 Overview
3.4.7.2 Products and applications
3.4.7.3 Global production
3.5 MICROBIAL & MINERAL SOURCES
3.5.1 Microalgae
3.5.1.1 Overview
3.5.1.2 Products and applications
3.5.1.3 Global production
3.5.2 Macroalgae
3.5.2.1 Overview
3.5.2.2 Products and applications
3.5.2.3 Global production
3.5.3 Mineral sources
3.5.3.1 Overview
3.5.3.2 Products and applications
3.6 GASEOUS
3.6.1 Biogas
3.6.1.1 Overview
3.6.1.2 Products and applications
3.6.1.3 Global production
3.6.2 Syngas
3.6.2.1 Overview
3.6.2.2 Products and applications
3.6.2.3 Global production
3.6.3 Off gases - fermentation CO2, CO
3.6.3.1 Overview
3.6.3.2 Products and applications
3.7 COMPANY PROFILES 210 (126 company profiles)

4.1 Overview
4.1.1 Drop-in bio-based plastics
4.1.2 Novel bio-based plastics
4.2 Biodegradable and compostable plastics
4.2.1 Biodegradability
4.2.2 Compostability
4.3 Types
4.4 Key market players
4.5 Synthetic biobased polymers
4.5.1 Polylactic acid (Bio-PLA)
4.5.1.1 Market analysis
4.5.1.2 Production
4.5.1.3 Producers and production capacities, current and planned
4.5.1.3.1 Lactic acid producers and production capacities
4.5.1.3.2 PLA producers and production capacities
4.5.1.3.3 Polylactic acid (Bio-PLA) production 2019-2035 (1,000 tonnes)
4.5.2 Polyethylene terephthalate (Bio-PET)
4.5.2.1 Market analysis
4.5.2.2 Producers and production capacities
4.5.2.3 Polyethylene terephthalate (Bio-PET) production 2019-2035 (1,000 tonnes)
4.5.3 Polytrimethylene terephthalate (Bio-PTT)
4.5.3.1 Market analysis
4.5.3.2 Producers and production capacities
4.5.3.3 Polytrimethylene terephthalate (PTT) production 2019-2035 (1,000 tonnes)
4.5.4 Polyethylene furanoate (Bio-PEF)
4.5.4.1 Market analysis
4.5.4.2 Comparative properties to PET
4.5.4.3 Producers and production capacities
4.5.4.3.1 FDCA and PEF producers and production capacities
4.5.4.3.2 Polyethylene furanoate (Bio-PEF) production 2019-2035 (1,000 tonnes).
4.5.5 Polyamides (Bio-PA)
4.5.5.1 Market analysis
4.5.5.2 Producers and production capacities
4.5.5.3 Polyamides (Bio-PA) production 2019-2035 (1,000 tonnes)
4.5.6 Poly(butylene adipate-co-terephthalate) (Bio-PBAT)
4.5.6.1 Market analysis
4.5.6.2 Producers and production capacities
4.5.6.3 Poly(butylene adipate-co-terephthalate) (Bio-PBAT) production 2019-2035 (1,000 tonnes)
4.5.7 Polybutylene succinate (PBS) and copolymers
4.5.7.1 Market analysis
4.5.7.2 Producers and production capacities
4.5.7.3 Polybutylene succinate (PBS) production 2019-2035 (1,000 tonnes)
4.5.8 Polyethylene (Bio-PE)
4.5.8.1 Market analysis
4.5.8.2 Producers and production capacities
4.5.8.3 Polyethylene (Bio-PE) production 2019-2035 (1,000 tonnes).
4.5.9 Polypropylene (Bio-PP)
4.5.9.1 Market analysis
4.5.9.2 Producers and production capacities
4.5.9.3 Polypropylene (Bio-PP) production 2019-2035 (1,000 tonnes)
4.6 Natural biobased polymers
4.6.1 Polyhydroxyalkanoates (PHA)
4.6.1.1 Technology description
4.6.1.2 Types
4.6.1.2.1 PHB
4.6.1.2.2 PHBV
4.6.1.3 Synthesis and production processes
4.6.1.4 Market analysis
4.6.1.5 Commercially available PHAs
4.6.1.6 Markets for PHAs
4.6.1.6.1 Packaging
4.6.1.6.2 Cosmetics
4.6.1.6.2.1 PHA microspheres
4.6.1.6.3 Medical
4.6.1.6.3.1 Tissue engineering
4.6.1.6.3.2 Drug delivery
4.6.1.6.4 Agriculture
4.6.1.6.4.1 Mulch film
4.6.1.6.4.2 Grow bags
4.6.1.7 Producers and production capacities
4.6.2 Cellulose
4.6.2.1 Microfibrillated cellulose (MFC)
4.6.2.1.1 Market analysis
4.6.2.1.2 Producers and production capacities
4.6.2.2 Nanocellulose
4.6.2.2.1 Cellulose nanocrystals
4.6.2.2.1.1 Synthesis
4.6.2.2.1.2 Properties
4.6.2.2.1.3 Production
4.6.2.2.1.4 Applications
4.6.2.2.1.5 Market analysis
4.6.2.2.1.6 Producers and production capacities
4.6.2.2.2 Cellulose nanofibers
4.6.2.2.2.1 Applications
4.6.2.2.2.2 Market analysis
4.6.2.2.2.3 Producers and production capacities
4.6.2.2.3 Bacterial Nanocellulose (BNC)
4.6.2.2.3.1 Production
4.6.2.2.3.2 Applications
4.6.3 Protein-based bioplastics
4.6.3.1 Types, applications and producers
4.6.4 Algal and fungal
4.6.4.1 Algal
4.6.4.1.1 Advantages
4.6.4.1.2 Production
4.6.4.1.3 Producers
4.6.4.2 Mycelium
4.6.4.2.1 Properties
4.6.4.2.2 Applications
4.6.4.2.3 Commercialization
4.6.5 Chitosan
4.6.5.1 Technology description
4.7 Production by region
4.7.1 North America
4.7.2 Europe
4.7.3 Asia-Pacific
4.7.3.1 China
4.7.3.2 Japan
4.7.3.3 Thailand
4.7.3.4 Indonesia
4.7.4 Latin America
4.8 End use markets
4.8.1 Packaging
4.8.1.1 Processes for bioplastics in packaging
4.8.1.2 Applications
4.8.1.3 Flexible packaging
4.8.1.3.1 Production volumes 2019-2035
4.8.1.4 Rigid packaging
4.8.1.4.1 Production volumes 2019-2035
4.8.2 Consumer products
4.8.2.1 Applications
4.8.2.2 Production volumes 2019-2035
4.8.3 Automotive
4.8.3.1 Applications
4.8.3.2 Production volumes 2019-2035
4.8.4 Construction
4.8.4.1 Applications
4.8.4.2 Production volumes 2019-2035
4.8.5 Textiles
4.8.5.1 Apparel
4.8.5.2 Footwear
4.8.5.3 Medical textiles
4.8.5.4 Production volumes 2019-2035
4.8.6 Electronics
4.8.6.1 Applications
4.8.6.2 Production volumes 2019-2035
4.8.7 Agriculture and horticulture
4.8.7.1 Production volumes 2019-2035
4.9 Lignin
4.9.1 Introduction
4.9.1.1 What is lignin?
4.9.1.1.1 Lignin structure
4.9.1.2 Types of lignin
4.9.1.2.1 Sulfur containing lignin
4.9.1.2.2 Sulfur-free lignin from biorefinery process
4.9.1.3 Properties
4.9.1.4 The lignocellulose biorefinery
4.9.1.5 Markets and applications
4.9.1.6 Challenges for using lignin
4.9.2 Lignin production processes
4.9.2.1 Lignosulphonates
4.9.2.2 Kraft Lignin
4.9.2.2.1 LignoBoost process
4.9.2.2.2 LignoForce method
4.9.2.2.3 Sequential Liquid Lignin Recovery and Purification
4.9.2.2.4 A-Recovery
4.9.2.3 Soda lignin
4.9.2.4 Biorefinery lignin
4.9.2.4.1 Commercial and pre-commercial biorefinery lignin production facilities and processes
4.9.2.5 Organosolv lignins
4.9.2.6 Hydrolytic lignin
4.9.3 Markets for lignin
4.9.3.1 Market drivers and trends for lignin
4.9.3.2 Production capacities
4.9.3.2.1 Technical lignin availability (dry ton/y)
4.9.3.2.2 Biomass conversion (Biorefinery)
4.9.3.3 Global consumption of lignin
4.9.3.3.1 By type
4.9.3.3.2 By market
4.9.3.4 Prices
4.9.3.5 Heat and power energy
4.9.3.6 Pyrolysis and syngas
4.9.3.7 Aromatic compounds
4.9.3.7.1 Benzene, toluene and xylene
4.9.3.7.2 Phenol and phenolic resins
4.9.3.7.3 Vanillin
4.9.3.8 Plastics and polymers
4.10 COMPANY PROFILES 405 (522 company profiles)

5.1 Introduction
5.1.1 What are natural fiber materials?
5.1.2 Benefits of natural fibers over synthetic
5.1.3 Markets and applications for natural fibers
5.1.4 Commercially available natural fiber products
5.1.5 Market drivers for natural fibers
5.1.6 Market challenges
5.1.7 Wood flour as a plastic filler
5.2 Types of natural fibers in plastic composites
5.2.1 Plants
5.2.1.1 Seed fibers
5.2.1.1.1 Kapok
5.2.1.1.2 Luffa
5.2.1.2 Bast fibers
5.2.1.2.1 Jute
5.2.1.2.2 Hemp
5.2.1.2.3 Flax
5.2.1.2.4 Ramie
5.2.1.2.5 Kenaf
5.2.1.3 Leaf fibers
5.2.1.3.1 Sisal
5.2.1.3.2 Abaca
5.2.1.4 Fruit fibers
5.2.1.4.1 Coir
5.2.1.4.2 Banana
5.2.1.4.3 Pineapple
5.2.1.5 Stalk fibers from agricultural residues
5.2.1.5.1 Rice fiber
5.2.1.5.2 Corn
5.2.1.6 Cane, grasses and reed
5.2.1.6.1 Switchgrass
5.2.1.6.2 Sugarcane (agricultural residues)
5.2.1.6.3 Bamboo
5.2.1.6.4 Fresh grass (green biorefinery)
5.2.1.7 Modified natural polymers
5.2.1.7.1 Mycelium
5.2.1.7.2 Chitosan
5.2.1.7.3 Alginate
5.2.2 Animal (fibrous protein)
5.2.2.1 Silk fiber
5.2.3 Wood-based natural fibers
5.2.3.1 Cellulose fibers
5.2.3.1.1 Market overview
5.2.3.1.2 Producers
5.2.3.2 Microfibrillated cellulose (MFC)
5.2.3.2.1 Market overview
5.2.3.2.2 Producers
5.2.3.3 Cellulose nanocrystals
5.2.3.3.1 Market overview
5.2.3.3.2 Producers
5.2.3.4 Cellulose nanofibers
5.2.3.4.1 Market overview
5.2.3.4.2 Producers
5.3 Processing and Treatment of Natural Fibers
5.4 Interface and Compatibility of Natural Fibers with Plastic Matrices
5.4.1 Adhesion and Bonding
5.4.2 Moisture Absorption and Dimensional Stability
5.4.3 Thermal Expansion and Compatibility
5.4.4 Dispersion and Distribution
5.4.5 Matrix Selection
5.4.6 Fiber Content and Alignment
5.4.7 Manufacturing Techniques
5.5 Manufacturing processes
5.5.1 Injection molding
5.5.2 Compression moulding
5.5.3 Extrusion
5.5.4 Thermoforming
5.5.5 Thermoplastic pultrusion
5.5.6 Additive manufacturing (3D printing)
5.6 Global market for natural fibers
5.6.1 Automotive
5.6.1.1 Applications
5.6.1.2 Commercial production
5.6.1.3 SWOT analysis
5.6.2 Packaging
5.6.2.1 Applications
5.6.2.2 SWOT analysis
5.6.3 Construction
5.6.3.1 Applications
5.6.3.2 SWOT analysis
5.6.4 Appliances
5.6.4.1 Applications
5.6.4.2 SWOT analysis
5.6.5 Consumer electronics
5.6.5.1 Applications
5.6.5.2 SWOT analysis
5.6.6 Furniture
5.6.6.1 Applications
5.6.6.2 SWOT analysis
5.7 Competitive landscape
5.8 Future outlook
5.9 Revenues
5.9.1 By end use market
5.9.2 By Material Type
5.9.3 By Plastic Type
5.9.4 By region
5.10 Company profiles 850 (67 company profiles)

6.1 Market overview
6.1.1 Benefits of Sustainable Construction
6.1.2 Global Trends and Drivers
6.2 Global revenues
6.2.1 By materials type
6.2.2 By market
6.3 Types of sustainable construction materials
6.3.1 Established bio-based construction materials
6.3.2 Hemp-based Materials
6.3.2.1 Hemp Concrete (Hempcrete)
6.3.2.2 Hemp Fiberboard
6.3.2.3 Hemp Insulation
6.3.3 Mycelium-based Materials
6.3.3.1 Insulation
6.3.3.2 Structural Elements
6.3.3.3 Acoustic Panels
6.3.3.4 Decorative Elements
6.3.4 Sustainable Concrete and Cement Alternatives
6.3.4.1 Geopolymer Concrete
6.3.4.2 Recycled Aggregate Concrete
6.3.4.3 Lime-Based Materials
6.3.4.4 Self-healing concrete
6.3.4.4.1 Bioconcrete
6.3.4.4.2 Fiber concrete
6.3.4.5 Microalgae biocement
6.3.4.6 Carbon-negative concrete
6.3.4.7 Biomineral binders
6.3.5 Natural Fiber Composites
6.3.5.1 Types of Natural Fibers
6.3.5.2 Properties
6.3.5.3 Applications in Construction
6.3.6 Cellulose nanofibers
6.3.6.1 Sandwich composites
6.3.6.2 Cement additives
6.3.6.3 Pump primers
6.3.6.4 Insulation materials
6.3.6.5 Coatings and paints
6.3.6.6 3D printing materials
6.3.7 Sustainable Insulation Materials
6.3.7.1 Types of sustainable insulation materials
6.3.7.2 Aerogel Insulation
6.3.7.2.1 Silica aerogels
6.3.7.2.1.1 Properties
6.3.7.2.1.2 Thermal conductivity
6.3.7.2.1.3 Mechanical
6.3.7.2.1.4 Silica aerogel precursors
6.3.7.2.1.5 Products
6.3.7.2.1.5.1 Monoliths
6.3.7.2.1.5.2 Powder
6.3.7.2.1.5.3 Granules
6.3.7.2.1.5.4 Blankets
6.3.7.2.1.5.5 Aerogel boards
6.3.7.2.1.5.6 Aerogel renders
6.3.7.2.1.6 3D printing of aerogels
6.3.7.2.1.7 Silica aerogel from sustainable feedstocks
6.3.7.2.1.8 Silica composite aerogels
6.3.7.2.1.8.1 Organic crosslinkers
6.3.7.2.1.9 Cost of silica aerogels
6.3.7.2.1.10 Main players
6.3.7.2.2 Aerogel-like foam materials
6.3.7.2.2.1 Properties
6.3.7.2.2.2 Applications
6.3.7.2.3 Metal oxide aerogels
6.3.7.2.4 Organic aerogels
6.3.7.2.4.1 Polymer aerogels
6.3.7.2.5 Biobased and sustainable aerogels (bio-aerogels)
6.3.7.2.5.1 Cellulose aerogels
6.3.7.2.5.1.1 Cellulose nanofiber (CNF) aerogels
6.3.7.2.5.1.2 Cellulose nanocrystal aerogels
6.3.7.2.5.1.3 Bacterial nanocellulose aerogels
6.3.7.2.5.2 Lignin aerogels
6.3.7.2.5.3 Alginate aerogels
6.3.7.2.5.4 Starch aerogels
6.3.7.2.5.5 Chitosan aerogels
6.3.7.2.6 Carbon aerogels
6.3.7.2.6.1 Carbon nanotube aerogels
6.3.7.2.6.2 Graphene and graphite aerogels
6.3.7.2.7 Additive manufacturing (3D printing)
6.3.7.2.7.1 Carbon nitride
6.3.7.2.7.2 Gold
6.3.7.2.7.3 Cellulose
6.3.7.2.7.4 Graphene oxide
6.3.7.2.8 Hybrid aerogels
6.4 Carbon capture and utilization
6.4.1 Overview
6.4.2 Market structure
6.4.3 CCUS technologies in the cement industry
6.4.4 Products
6.4.4.1 Carbonated aggregates
6.4.4.2 Additives during mixing
6.4.4.3 Carbonates from natural minerals
6.4.4.4 Carbonates from waste
6.4.5 Concrete curing
6.4.6 Costs
6.4.7 Challenges
6.5 Green steel
6.5.1 Current Steelmaking processes
6.5.1.1.1 Capturing then sequestering or utilizing carbon emissions from conventional steel mills.
6.5.2 Decarbonization target and policies
6.5.2.1 EU Carbon Border Adjustment Mechanism (CBAM)
6.5.3 Advances in clean production technologies
6.5.4 Production technologies
6.5.4.1 The role of hydrogen
6.5.4.2 Comparative analysis
6.5.4.3 Hydrogen Direct Reduced Iron (DRI)
6.5.4.4 Electrolysis
6.5.4.5 Carbon Capture, Utilization and Storage (CCUS)
6.5.4.6 Biochar replacing coke
6.5.4.7 Hydrogen Blast Furnace
6.5.4.8 Renewable energy powered processes
6.5.4.9 Flash ironmaking
6.5.4.10 Hydrogen Plasma Iron Ore Reduction
6.5.4.11 Ferrous Bioprocessing
6.5.4.12 Microwave Processing
6.5.4.13 Additive Manufacturing
6.5.4.14 Technology readiness level (TRL)
6.5.5 Properties
6.6 Markets and applications
6.6.1 Residential Buildings
6.6.2 Commercial and Office Buildings
6.6.3 Infrastructure
6.7 Company profiles 1011 (144 company profiles)

7.1 Market overview
7.1.1 Current global packaging market and materials
7.1.2 Market trends
7.1.3 Drivers for recent growth in bioplastics in packaging
7.1.4 Challenges for bio-based and sustainable packaging
7.2 Materials
7.2.1 Materials innovation
7.2.2 Active packaging
7.2.3 Monomaterial packaging
7.2.4 Conventional polymer materials used in packaging
7.2.4.1 Polyolefins: Polypropylene and polyethylene
7.2.4.2 PET and other polyester polymers
7.2.4.3 Renewable and bio-based polymers for packaging
7.2.4.4 Comparison of synthetic fossil-based and bio-based polymers
7.2.4.5 Processes for bioplastics in packaging
7.2.4.6 End-of-life treatment of bio-based and sustainable packaging
7.3 Synthetic bio-based packaging materials
7.3.1 Polylactic acid (Bio-PLA)
7.3.1.1 Properties
7.3.1.2 Applicaitons
7.3.2 Polyethylene terephthalate (Bio-PET)
7.3.2.1 Properties
7.3.2.2 Applications
7.3.2.3 Advantages of Bio-PET in Packaging
7.3.2.4 Challenges and Limitations
7.3.3 Polytrimethylene terephthalate (Bio-PTT)
7.3.3.1 Production Process
7.3.3.2 Properties
7.3.3.3 Applications
7.3.3.4 Advantages of Bio-PTT in Packaging
7.3.3.5 Challenges and Limitations
7.3.4 Polyethylene furanoate (Bio-PEF)
7.3.4.1 Properties
7.3.4.2 Applications
7.3.4.3 Advantages of Bio-PEF in Packaging
7.3.4.4 Challenges and Limitations
7.3.5 Bio-PA
7.3.5.1 Properties
7.3.5.2 Applications in Packaging
7.3.5.3 Advantages of Bio-PA in Packaging
7.3.5.4 Challenges and Limitations
7.3.6 Poly(butylene adipate-co-terephthalate) (Bio-PBAT)- Aliphatic aromatic copolyesters
7.3.6.1 Properties
7.3.6.2 Applications in Packaging
7.3.6.3 Advantages of Bio-PBAT in Packaging
7.3.6.4 Challenges and Limitations
7.3.7 Polybutylene succinate (PBS) and copolymers
7.3.7.1 Properties
7.3.7.2 Applications in Packaging
7.3.7.3 Advantages of Bio-PBS and Co-polymers in Packaging
7.3.7.4 Challenges and Limitations
7.3.8 Polypropylene (Bio-PP)
7.3.8.1 Properties
7.3.8.2 Applications in Packaging
7.3.8.3 Advantages of Bio-PP in Packaging
7.3.8.4 Challenges and Limitations
7.4 Natural bio-based packaging materials
7.4.1 Polyhydroxyalkanoates (PHA)
7.4.1.1 Properties
7.4.1.2 Applications in Packaging
7.4.1.3 Advantages of PHA in Packaging
7.4.1.4 Challenges and Limitations
7.4.2 Starch-based blends
7.4.2.1 Properties
7.4.2.2 Applications in Packaging
7.4.2.3 Advantages of Starch-Based Blends in Packaging
7.4.2.4 Challenges and Limitations
7.4.3 Cellulose
7.4.3.1 Feedstocks
7.4.3.1.1 Wood
7.4.3.1.2 Plant
7.4.3.1.3 Tunicate
7.4.3.1.4 Algae
7.4.3.1.5 Bacteria
7.4.3.2 Microfibrillated cellulose (MFC)
7.4.3.2.1 Properties
7.4.3.3 Nanocellulose
7.4.3.3.1 Cellulose nanocrystals
7.4.3.3.1.1 Applications in packaging
7.4.3.3.2 Cellulose nanofibers
7.4.3.3.2.1 Applications in packaging
7.4.3.3.2.1.1 Reinforcement and barrier
7.4.3.3.2.1.2 Biodegradable food packaging foil and films
7.4.3.3.2.1.3 Paperboard coatings
7.4.3.3.3 Bacterial Nanocellulose (BNC)
7.4.3.3.3.1 Applications in packaging
7.4.4 Protein-based bioplastics in packaging
7.4.5 Lipids and waxes for packaging
7.4.6 Seaweed-based packaging
7.4.6.1 Production
7.4.6.2 Applications in packaging
7.4.6.3 Producers
7.4.7 Mycelium
7.4.7.1 Applications in packaging
7.4.8 Chitosan
7.4.8.1 Applications in packaging
7.4.9 Bio-naphtha
7.4.9.1 Overview
7.4.9.2 Markets and applications
7.5 Applications
7.5.1 Paper and board packaging
7.5.2 Food packaging
7.5.2.1 Bio-Based films and trays
7.5.2.2 Bio-Based pouches and bags
7.5.2.3 Bio-Based textiles and nets
7.5.2.4 Bioadhesives
7.5.2.4.1 Starch
7.5.2.4.2 Cellulose
7.5.2.4.3 Protein-Based
7.5.2.5 Barrier coatings and films
7.5.2.5.1 Polysaccharides
7.5.2.5.1.1 Chitin
7.5.2.5.1.2 Chitosan
7.5.2.5.1.3 Starch
7.5.2.5.2 Poly(lactic acid) (PLA)
7.5.2.5.3 Poly(butylene Succinate)
7.5.2.5.4 Functional Lipid and Proteins Based Coatings
7.5.2.6 Active and Smart Food Packaging
7.5.2.6.1 Active Materials and Packaging Systems
7.5.2.6.2 Intelligent and Smart Food Packaging
7.5.2.7 Antimicrobial films and agents
7.5.2.7.1 Natural
7.5.2.7.2 Inorganic nanoparticles
7.5.2.7.3 Biopolymers
7.5.2.8 Bio-based Inks and Dyes
7.5.2.9 Edible films and coatings
7.6 Biobased films and coatings in packaging
7.6.1 Challenges using bio-based paints and coatings
7.6.2 Types of bio-based coatings and films in packaging
7.6.2.1 Polyurethane coatings
7.6.2.1.1 Properties
7.6.2.1.2 Bio-based polyurethane coatings
7.6.2.1.3 Products
7.6.2.2 Acrylate resins
7.6.2.2.1 Properties
7.6.2.2.2 Bio-based acrylates
7.6.2.2.3 Products
7.6.2.3 Polylactic acid (Bio-PLA)
7.6.2.3.1 Properties
7.6.2.3.2 Bio-PLA coatings and films
7.6.2.4 Polyhydroxyalkanoates (PHA) coatings
7.6.2.5 Cellulose coatings and films
7.6.2.5.1 Microfibrillated cellulose (MFC)
7.6.2.5.2 Cellulose nanofibers
7.6.2.5.2.1 Properties
7.6.2.5.2.2 Product developers
7.6.2.6 Lignin coatings
7.6.2.7 Protein-based biomaterials for coatings
7.6.2.7.1 Plant derived proteins
7.6.2.7.2 Animal origin proteins
7.7 Carbon capture derived materials for packaging
7.7.1 Benefits of carbon utilization for plastics feedstocks
7.7.2 CO2-derived polymers and plastics
7.7.3 CO2 utilization products
7.8 Global biobased packaging markets
7.8.1 Flexible packaging
7.8.2 Rigid packaging
7.8.3 Coatings and films
7.9 Company profiles 1228 (207 company profiles)

8.1 Types of bio-based fibres
8.1.1 Natural fibres
8.1.2 Main-made bio-based fibres
8.2 Bio-based synthetics
8.3 Recyclability of bio-based fibres
8.4 Lyocell
8.5 Bacterial cellulose
8.6 Algae textiles
8.7 Bio-based leather
8.7.1 Properties of bio-based leathers
8.7.1.1 Tear strength.
8.7.1.2 Tensile strength
8.7.1.3 Bally flexing
8.7.2 Comparison with conventional leathers
8.7.3 Comparative analysis of bio-based leathers
8.7.4 Plant-based leather
8.7.4.1 Overview
8.7.4.2 Production processes
8.7.4.2.1 Feedstocks
8.7.4.2.1.1 Agriculture Residues
8.7.4.2.1.2 Food Processing Waste
8.7.4.2.1.3 Invasive Plants
8.7.4.2.1.4 Culture-Grown Inputs
8.7.4.2.2 Textile-Based
8.7.4.2.3 Bio-Composite
8.7.4.3 Products
8.7.4.4 Market players
8.7.5 Mycelium leather
8.7.5.1 Overview
8.7.5.2 Production process
8.7.5.2.1 Growth conditions
8.7.5.2.2 Tanning Mycelium Leather
8.7.5.2.3 Dyeing Mycelium Leather
8.7.5.3 Products
8.7.5.4 Market players
8.7.6 Microbial leather
8.7.6.1 Overview
8.7.6.2 Production process
8.7.6.3 Fermentation conditions
8.7.6.4 Harvesting
8.7.6.5 Products
8.7.6.6 Market players
8.7.7 Lab grown leather
8.7.7.1 Overview
8.7.7.2 Production process
8.7.7.3 Products
8.7.7.4 Market players
8.7.8 Protein-based leather
8.7.8.1 Overview
8.7.8.2 Production process
8.7.8.3 Commercial activity
8.7.9 Sustainable textiles coatings and dyes
8.7.9.1 Overview
8.7.9.1.1 Coatings
8.7.9.1.2 Dyes
8.7.9.2 Commercial activity
8.8 Markets
8.8.1 Footwear
8.8.2 Fashion & Accessories
8.8.3 Automotive & Transport
8.8.4 Furniture
8.9 Global market revenues
8.9.1 By region
8.9.2 By end use market
8.10 Company profiles 1444 (67 company profiles)

9.1 Drop-in replacements
9.2 Bio-based resins
9.3 Reducing carbon footprint in industrial and protective coatings
9.4 Market drivers
9.5 Challenges using bio-based coatings
9.6 Types
9.6.1 Eco-friendly coatings technologies
9.6.1.1 UV-cure
9.6.1.2 Waterborne coatings
9.6.1.3 Treatments with less or no solvents
9.6.1.4 Hyperbranched polymers for coatings
9.6.1.5 Powder coatings
9.6.1.6 High solid (HS) coatings
9.6.1.7 Use of bio-based materials in coatings
9.6.1.7.1 Biopolymers
9.6.1.7.2 Coatings based on agricultural waste
9.6.1.7.3 Vegetable oils and fatty acids
9.6.1.7.4 Proteins
9.6.1.7.5 Cellulose
9.6.1.7.6 Plant-Based wax coatings
9.6.2 Barrier coatings
9.6.2.1 Polysaccharides
9.6.2.1.1 Chitin
9.6.2.1.2 Chitosan
9.6.2.1.3 Starch
9.6.2.2 Poly(lactic acid) (PLA)
9.6.2.3 Poly(butylene Succinate
9.6.2.4 Functional Lipid and Proteins Based Coatings
9.6.3 Alkyd coatings
9.6.3.1 Alkyd resin properties
9.6.3.2 Bio-based alkyd coatings
9.6.3.3 Products
9.6.4 Polyurethane coatings
9.6.4.1 Properties
9.6.4.2 Bio-based polyurethane coatings
9.6.4.2.1 Bio-based polyols
9.6.4.2.2 Non-isocyanate polyurethane (NIPU)
9.6.4.3 Products
9.6.5 Epoxy coatings
9.6.5.1 Properties
9.6.5.2 Bio-based epoxy coatings
9.6.5.3 Prod
9.6.5.4 Products
9.6.6 Acrylate resins
9.6.6.1 Properties
9.6.6.2 Bio-based acrylates
9.6.6.3 Products
9.6.7 Polylactic acid (Bio-PLA)
9.6.7.1 Properties
9.6.7.2 Bio-PLA coatings and films
9.6.8 Polyhydroxyalkanoates (PHA)
9.6.8.1 Properties
9.6.8.2 PHA coatings
9.6.8.3 Commercially available PHAs
9.6.9 Cellulose
9.6.9.1 Microfibrillated cellulose (MFC)
9.6.9.1.1 Properties
9.6.9.1.2 Applications in coatings
9.6.9.2 Cellulose nanofibers
9.6.9.2.1 Properties
9.6.9.2.2 Applications in coatings
9.6.9.3 Cellulose nanocrystals
9.6.9.4 Bacterial Nanocellulose (BNC)
9.6.10 Rosins
9.6.11 Bio-based carbon black
9.6.11.1 Lignin-based
9.6.11.2 Algae-based
9.6.12 Lignin coatings
9.6.13 Edible films and coatings
9.6.14 Antimicrobial films and agents
9.6.14.1 Natural
9.6.14.2 Inorganic nanoparticles
9.6.14.3 Biopolymers
9.6.15 Nanocoatings
9.6.16 Protein-based biomaterials for coatings
9.6.16.1 Plant derived proteins
9.6.16.2 Animal origin proteins
9.6.17 Algal coatings
9.6.18 Polypeptides
9.6.19 Global market revenues
9.7 Company profiles 1562 (168 company profiles)

10.1 Comparison to fossil fuels
10.2 Role in the circular economy
10.3 Market drivers
10.4 Market challenges
10.5 Liquid biofuels market
10.5.1 Liquid biofuel production and consumption (in thousands of m3), 2000-2022
10.5.2 Liquid biofuels market 2020-2035, by type and production.
10.6 The global biofuels market
10.6.1 Diesel substitutes and alternatives
10.6.2 Gasoline substitutes and alternatives
10.7 SWOT analysis: Biofuels market
10.8 Comparison of biofuel costs 2023, by type
10.9 Types
10.9.1 Solid Biofuels
10.9.2 Liquid Biofuels
10.9.3 Gaseous Biofuels
10.9.4 Conventional Biofuels
10.9.5 Advanced Biofuels
10.10 Feedstocks
10.10.1 First-generation (1-G)
10.10.2 Second-generation (2-G)
10.10.2.1 Lignocellulosic wastes and residues
10.10.2.2 Biorefinery lignin
10.10.3 Third-generation (3-G)
10.10.3.1 Algal biofuels
10.10.3.1.1 Properties
10.10.3.1.2 Advantages
10.10.4 Fourth-generation (4-G)
10.10.5 Advantages and disadvantages, by generation
10.10.6 Energy crops
10.10.6.1 Feedstocks
10.10.6.2 SWOT analysis
10.10.7 Agricultural residues
10.10.7.1 Feedstocks
10.10.7.2 SWOT analysis
10.10.8 Manure, sewage sludge and organic waste
10.10.8.1 Processing pathways
10.10.8.2 SWOT analysis
10.10.9 Forestry and wood waste
10.10.9.1 Feedstocks
10.10.9.2 SWOT analysis
10.10.10 Feedstock costs
10.11 Hydrocarbon biofuels
10.11.1 Biodiesel
10.11.1.1 Biodiesel by generation
10.11.1.2 SWOT analysis
10.11.1.3 Production of biodiesel and other biofuels
10.11.1.3.1 Pyrolysis of biomass
10.11.1.3.2 Vegetable oil transesterification
10.11.1.3.3 Vegetable oil hydrogenation (HVO)
10.11.1.3.3.1 Production process
10.11.1.3.4 Biodiesel from tall oil
10.11.1.3.5 Fischer-Tropsch BioDiesel
10.11.1.3.6 Hydrothermal liquefaction of biomass
10.11.1.3.7 CO2 capture and Fischer-Tropsch (FT)
10.11.1.3.8 Dymethyl ether (DME)
10.11.1.4 Prices
10.11.1.5 Global production and consumption
10.11.2 Renewable diesel
10.11.2.1 Production
10.11.2.2 SWOT analysis
10.11.2.3 Global consumption
10.11.2.4 Prices
10.11.3 Bio-aviation fuel (bio-jet fuel, sustainable aviation fuel, renewable jet fuel or aviation biofuel)
10.11.3.1 Description
10.11.3.2 SWOT analysis
10.11.3.3 Global production and consumption
10.11.3.4 Production pathways
10.11.3.5 Prices
10.11.3.6 Bio-aviation fuel production capacities
10.11.3.7 Market challenges
10.11.3.8 Global consumption
10.11.4 Bio-naphtha
10.11.4.1 Overview
10.11.4.2 SWOT analysis
10.11.4.3 Markets and applications
10.11.4.4 Prices
10.11.4.5 Production capacities, by producer, current and planned
10.11.4.6 Production capacities, total (tonnes), historical, current and planned
10.12 Alcohol fuels
10.12.1 Biomethanol
10.12.1.1 SWOT analysis
10.12.1.2 Methanol-to gasoline technology
10.12.1.2.1 Production processes
10.12.1.2.1.1 Anaerobic digestion
10.12.1.2.1.2 Biomass gasification
10.12.1.2.1.3 Power to Methane
10.12.2 Ethanol
10.12.2.1 Technology description
10.12.2.2 1G Bio-Ethanol
10.12.2.3 SWOT analysis
10.12.2.4 Ethanol to jet fuel technology
10.12.2.5 Methanol from pulp & paper production
10.12.2.6 Sulfite spent liquor fermentation
10.12.2.7 Gasification
10.12.2.7.1 Biomass gasification and syngas fermentation
10.12.2.7.2 Biomass gasification and syngas thermochemical conversion
10.12.2.8 CO2 capture and alcohol synthesis
10.12.2.9 Biomass hydrolysis and fermentation
10.12.2.9.1 Separate hydrolysis and fermentation
10.12.2.9.2 Simultaneous saccharification and fermentation (SSF)
10.12.2.9.3 Pre-hydrolysis and simultaneous saccharification and fermentation (PSSF)
10.12.2.9.4 Simultaneous saccharification and co-fermentation (SSCF)
10.12.2.9.5 Direct conversion (consolidated bioprocessing) (CBP)
10.12.2.10 Global ethanol consumption
10.12.3 Biobutanol
10.12.3.1 Production
10.12.3.2 Prices
10.13 Biomass-based Gas
10.13.1 Feedstocks
10.13.1.1 Biomethane
10.13.1.2 Production pathways
10.13.1.2.1 Landfill gas recovery
10.13.1.2.2 Anaerobic digestion
10.13.1.2.3 Thermal gasification
10.13.1.3 SWOT analysis
10.13.1.4 Global production
10.13.1.5 Prices
10.13.1.5.1 Raw Biogas
10.13.1.5.2 Upgraded Biomethane
10.13.1.6 Bio-LNG
10.13.1.6.1 Markets
10.13.1.6.1.1 Trucks
10.13.1.6.1.2 Marine
10.13.1.6.2 Production
10.13.1.6.3 Plants
10.13.1.7 bio-CNG (compressed natural gas derived from biogas)
10.13.1.8 Carbon capture from biogas
10.13.2 Biosyngas
10.13.2.1 Production
10.13.2.2 Prices
10.13.3 Biohydrogen
10.13.3.1 Description
10.13.3.2 SWOT analysis
10.13.3.3 Production of biohydrogen from biomass
10.13.3.3.1 Biological Conversion Routes
10.13.3.3.1.1 Bio-photochemical Reaction
10.13.3.3.1.2 Fermentation and Anaerobic Digestion
10.13.3.3.2 Thermochemical conversion routes
10.13.3.3.2.1 Biomass Gasification
10.13.3.3.2.2 Biomass Pyrolysis
10.13.3.3.2.3 Biomethane Reforming
10.13.3.4 Applications
10.13.3.5 Prices
10.13.4 Biochar in biogas production
10.13.5 Bio-DME
10.14 Chemical recycling for biofuels
10.14.1 Plastic pyrolysis
10.14.2 Used tires pyrolysis
10.14.2.1 Conversion to biofuel
10.14.3 Co-pyrolysis of biomass and plastic wastes
10.14.4 Gasification
10.14.4.1 Syngas conversion to methanol
10.14.4.2 Biomass gasification and syngas fermentation
10.14.4.3 Biomass gasification and syngas thermochemical conversion
10.14.5 Hydrothermal cracking
10.14.6 SWOT analysis
10.15 Electrofuels (E-fuels, power-to-gas/liquids/fuels)
10.15.1 Introduction
10.15.2 Benefits of e-fuels
10.15.3 Feedstocks
10.15.3.1 Hydrogen electrolysis
10.15.3.2 CO2 capture
10.15.4 SWOT analysis
10.15.5 Production
10.15.5.1 eFuel production facilities, current and planned
10.15.6 Electrolysers
10.15.6.1 Commercial alkaline electrolyser cells (AECs)
10.15.6.2 PEM electrolysers (PEMEC)
10.15.6.3 High-temperature solid oxide electrolyser cells (SOECs)
10.15.7 Prices
10.15.8 Market challenges
10.15.9 Companies
10.16 Algae-derived biofuels
10.16.1 Technology description
10.16.2 Conversion pathways
10.16.3 SWOT analysis
10.16.4 Production
10.16.5 Market challenges
10.16.6 Prices
10.16.7 Producers
10.17 Green Ammonia
10.17.1 Production
10.17.1.1 Decarbonisation of ammonia production
10.17.1.2 Green ammonia projects
10.17.2 Green ammonia synthesis methods
10.17.2.1 Haber-Bosch process
10.17.2.2 Biological nitrogen fixation
10.17.2.3 Electrochemical production
10.17.2.4 Chemical looping processes
10.17.3 SWOT analysis
10.17.4 Blue ammonia
10.17.4.1 Blue ammonia projects
10.17.5 Markets and applications
10.17.5.1 Chemical energy storage
10.17.5.1.1 Ammonia fuel cells
10.17.5.2 Marine fuel
10.17.6 Prices
10.17.7 Estimated market demand
10.17.8 Companies and projects
10.18 Biofuels from carbon capture
10.18.1 Overview
10.18.2 CO2 capture from point sources
10.18.3 Production routes
10.18.4 SWOT analysis
10.18.5 Direct air capture (DAC)
10.18.5.1 Description
10.18.5.2 Deployment
10.18.5.3 Point source carbon capture versus Direct Air Capture
10.18.5.4 Technologies
10.18.5.4.1 Solid sorbents
10.18.5.4.2 Liquid sorbents
10.18.5.4.3 Liquid solvents
10.18.5.4.4 Airflow equipment integration
10.18.5.4.5 Passive Direct Air Capture (PDAC)
10.18.5.4.6 Direct conversion
10.18.5.4.7 Co-product generation
10.18.5.4.8 Low Temperature DAC
10.18.5.4.9 Regeneration methods
10.18.5.5 Commercialization and plants
10.18.5.6 Metal-organic frameworks (MOFs) in DAC
10.18.5.7 DAC plants and projects-current and planned
10.18.5.8 Markets for DAC
10.18.5.9 Costs
10.18.5.10 Challenges
10.18.5.11 Players and production
10.18.6 Carbon utilization for biofuels
10.18.6.1 Production routes
10.18.6.1.1 Electrolyzers
10.18.6.1.2 Low-carbon hydrogen
10.18.6.2 Products & applications
10.18.6.2.1 Vehicles
10.18.6.2.2 Shipping
10.18.6.2.3 Aviation
10.18.6.2.4 Costs
10.18.6.2.5 Ethanol
10.18.6.2.6 Methanol
10.18.6.2.7 Sustainable Aviation Fuel
10.18.6.2.8 Methane
10.18.6.2.9 Algae based biofuels
10.18.6.2.10 CO2-fuels from solar
10.18.6.3 Challenges
10.18.6.4 SWOT analysis
10.18.6.5 Companies
10.19 Bio-oils (pyrolysis oils)
10.19.1 Description
10.19.1.1 Advantages of bio-oils
10.19.2 Production
10.19.2.1 Fast Pyrolysis
10.19.2.2 Costs of production
10.19.2.3 Upgrading
10.19.3 SWOT analysis
10.19.4 Applications
10.19.5 Bio-oil producers
10.19.6 Prices
10.20 Refuse Derived Fuels (RDF)
10.20.1 Overview
10.20.2 Production
10.20.2.1 Production process
10.20.2.2 Mechanical biological treatment
10.20.3 Markets
10.21 Company profiles 1899 (211 company profiles)

11.1 Overview
11.1.1 Green electronics manufacturing
11.1.2 Drivers for sustainable electronics
11.1.3 Environmental Impacts of Electronics Manufacturing
11.1.3.1 E-Waste Generation
11.1.3.2 Carbon Emissions
11.1.3.3 Resource Utilization
11.1.3.4 Waste Minimization
11.1.3.5 Supply Chain Impacts
11.1.4 New opportunities from sustainable electronics
11.1.5 Regulations
11.1.5.1 Certifications
11.1.6 Powering sustainable electronics (Bio-based batteries)
11.1.7 Bioplastics in injection moulded electronics parts
11.2 Green electronics manufacturing
11.2.1 Conventional electronics manufacturing
11.2.2 Benefits of Green Electronics manufacturing
11.2.3 Challenges in adopting Green Electronics manufacturing
11.2.4 Approaches
11.2.4.1 Closed-Loop Manufacturing
11.2.4.2 Digital Manufacturing
11.2.4.2.1 Advanced robotics & automation
11.2.4.2.2 AI & machine learning analytics
11.2.4.2.3 Internet of Things (IoT)
11.2.4.2.4 Additive manufacturing
11.2.4.2.5 Virtual prototyping
11.2.4.2.6 Blockchain-enabled supply chain traceability
11.2.4.3 Renewable Energy Usage
11.2.4.4 Energy Efficiency
11.2.4.5 Materials Efficiency
11.2.4.6 Sustainable Chemistry
11.2.4.7 Recycled Materials
11.2.4.7.1 Advanced chemical recycling
11.2.4.8 Bio-Based Materials
11.2.5 Greening the Supply Chain
11.2.5.1 Key focus areas
11.2.5.2 Sustainability activities from major electronics brands
11.2.5.3 Key challenges
11.2.5.4 Use of digital technologies
11.2.6 Sustainable Printed Circuit Board (PCB) manufacturing
11.2.6.1 Conventional PCB manufacturing
11.2.6.2 Trends in PCBs
11.2.6.2.1 High-Speed PCBs
11.2.6.2.2 Flexible PCBs
11.2.6.2.3 3D Printed PCBs
11.2.6.2.4 Sustainable PCBs
11.2.6.3 Reconciling sustainability with performance
11.2.6.4 Sustainable supply chains
11.2.6.5 Sustainability in PCB manufacturing
11.2.6.5.1 Sustainable cleaning of PCBs
11.2.6.6 Design of PCBs for sustainability
11.2.6.6.1 Rigid
11.2.6.6.2 Flexible
11.2.6.6.3 Additive manufacturing
11.2.6.6.4 In-mold elctronics (IME)
11.2.6.7 Materials
11.2.6.7.1 Metal cores
11.2.6.7.2 Recycled laminates
11.2.6.7.3 Conductive inks
11.2.6.7.4 Green and lead-free solder
11.2.6.7.5 Biodegradable substrates
11.2.6.7.5.1 Bacterial Cellulose
11.2.6.7.5.2 Mycelium
11.2.6.7.5.3 Lignin
11.2.6.7.5.4 Cellulose Nanofibers
11.2.6.7.5.5 Soy Protein
11.2.6.7.5.6 Algae
11.2.6.7.5.7 PHAs
11.2.6.7.6 Biobased inks
11.2.6.8 Substrates
11.2.6.8.1 Halogen-free FR4
11.2.6.8.1.1 FR4 limitations
11.2.6.8.1.2 FR4 alternatives
11.2.6.8.1.3 Bio-Polyimide
11.2.6.8.2 Metal-core PCBs
11.2.6.8.3 Biobased PCBs
11.2.6.8.3.1 Flexible (bio) polyimide PCBs
11.2.6.8.3.2 Recent commercial activity
11.2.6.8.4 Paper-based PCBs
11.2.6.8.5 PCBs without solder mask
11.2.6.8.6 Thinner dielectrics
11.2.6.8.7 Recycled plastic substrates
11.2.6.8.8 Flexible substrates
11.2.6.9 Sustainable patterning and metallization in electronics manufacturing
11.2.6.9.1 Introduction
11.2.6.9.2 Issues with sustainability
11.2.6.9.3 Regeneration and reuse of etching chemicals
11.2.6.9.4 Transition from Wet to Dry phase patterning
11.2.6.9.5 Print-and-plate
11.2.6.9.6 Approaches
11.2.6.9.6.1 Direct Printed Electronics
11.2.6.9.6.2 Photonic Sintering
11.2.6.9.6.3 Biometallization
11.2.6.9.6.4 Plating Resist Alternatives
11.2.6.9.6.5 Laser-Induced Forward Transfer
11.2.6.9.6.6 Electrohydrodynamic Printing
11.2.6.9.6.7 Electrically conductive adhesives (ECAs
11.2.6.9.6.8 Green electroless plating
11.2.6.9.6.9 Smart Masking
11.2.6.9.6.10 Component Integration
11.2.6.9.6.11 Bio-inspired material deposition
11.2.6.9.6.12 Multi-material jetting
11.2.6.9.6.13 Vacuumless deposition
11.2.6.9.6.14 Upcycling waste streams
11.2.6.10 Sustainable attachment and integration of components
11.2.6.10.1 Conventional component attachment materials
11.2.6.10.2 Materials
11.2.6.10.2.1 Conductive adhesives
11.2.6.10.2.2 Biodegradable adhesives
11.2.6.10.2.3 Magnets
11.2.6.10.2.4 Bio-based solders
11.2.6.10.2.5 Bio-derived solders
11.2.6.10.2.6 Recycled plastics
11.2.6.10.2.7 Nano adhesives
11.2.6.10.2.8 Shape memory polymers
11.2.6.10.2.9 Photo-reversible polymers
11.2.6.10.2.10 Conductive biopolymers
11.2.6.10.3 Processes
11.2.6.10.3.1 Traditional thermal processing methods
11.2.6.10.3.2 Low temperature solder
11.2.6.10.3.3 Reflow soldering
11.2.6.10.3.4 Induction soldering
11.2.6.10.3.5 UV curing
11.2.6.10.3.6 Near-infrared (NIR) radiation curing
11.2.6.10.3.7 Photonic sintering/curing
11.2.6.10.3.8 Hybrid integration
11.2.7 Sustainable integrated circuits
11.2.7.1 IC manufacturing
11.2.7.2 Sustainable IC manufacturing
11.2.7.3 Wafer production
11.2.7.3.1 Silicon
11.2.7.3.2 Gallium nitride ICs
11.2.7.3.3 Flexible ICs
11.2.7.3.4 Fully printed organic ICs
11.2.7.4 Oxidation methods
11.2.7.4.1 Sustainable oxidation
11.2.7.4.2 Metal oxides
11.2.7.4.3 Recycling
11.2.7.4.4 Thin gate oxide layers
11.2.7.5 Patterning and doping
11.2.7.5.1 Processes
11.2.7.5.1.1 Wet etching
11.2.7.5.1.2 Dry plasma etching
11.2.7.5.1.3 Lift-off patterning
11.2.7.5.1.4 Surface doping
11.2.7.6 Metallization
11.2.7.6.1 Evaporation
11.2.7.6.2 Plating
11.2.7.6.3 Printing
11.2.7.6.3.1 Printed metal gates for organic thin film transistors
11.2.7.6.4 Physical vapour deposition (PVD)
11.2.8 End of life
11.2.8.1 Hazardous waste
11.2.8.2 Emissions
11.2.8.3 Water Usage
11.2.8.4 Recycling
11.2.8.4.1 Mechanical recycling
11.2.8.4.2 Electro-Mechanical Separation
11.2.8.4.3 Chemical Recycling
11.2.8.5 Electrochemical Processes
11.2.8.5.1 Thermal Recycling
11.2.8.6 Green Certification
11.3 Global market
11.3.1 Global PCB manufacturing industry
11.3.1.1 PCB revenues
11.3.2 Sustainable PCBs
11.3.3 Sustainable ICs
11.4 Company profiles 2157 (45 company profiles)

12.1 Overview
12.1.1 Biobased Epoxy Adhesives
12.1.2 Bioobased Polyurethane Adhesives
12.1.3 Other Biobased Adhesives and Sealants
12.2 Types
12.2.1 Cellulose-Based
12.2.2 Starch-Based
12.2.3 Lignin-Based
12.2.4 Vegetable Oils
12.2.5 Protein-Based
12.2.6 Tannin-Based
12.2.7 Algae-based
12.2.8 Chitosan-based
12.2.9 Natural Rubber-based
12.2.10 Silkworm Silk-based
12.2.11 Mussel Protein-based
12.2.12 Soy-based Foam
12.3 Global revenues
12.3.1 By types
12.3.2 By market
12.4 Company profiles 2217 (15 company profiles)

Table 1. Plant-based feedstocks and biochemicals produced.
Table 2. Waste-based feedstocks and biochemicals produced.
Table 3. Microbial and mineral-based feedstocks and biochemicals produced.
Table 4. Common starch sources that can be used as feedstocks for producing biochemicals.
Table 5. Common lysine sources that can be used as feedstocks for producing biochemicals.
Table 6. Applications of lysine as a feedstock for biochemicals.
Table 7. HDMA sources that can be used as feedstocks for producing biochemicals.
Table 8. Applications of bio-based HDMA.
Table 9. Biobased feedstocks that can be used to produce 1,5-diaminopentane (DA5).
Table 10. Applications of DN5.
Table 11. Biobased feedstocks for isosorbide.
Table 12. Applications of bio-based isosorbide.
Table 13. Lactide applications.
Table 14. Biobased feedstock sources for itaconic acid.
Table 15. Applications of bio-based itaconic acid.
Table 16. Biobased feedstock sources for 3-HP.
Table 17. Applications of 3-HP.
Table 18. Applications of bio-based acrylic acid.
Table 19. Applications of bio-based 1,3-Propanediol (1,3-PDO).
Table 20. Biobased feedstock sources for Succinic acid.
Table 21. Applications of succinic acid.
Table 22. Applications of bio-based 1,4-Butanediol (BDO).
Table 23. Applications of bio-based Tetrahydrofuran (THF).
Table 24. Applications of bio-based adipic acid.
Table 25. Applications of bio-based caprolactam.
Table 26. Biobased feedstock sources for isobutanol.
Table 27. Applications of bio-based isobutanol.
Table 28. Biobased feedstock sources for p-Xylene.
Table 29. Applications of bio-based p-Xylene.
Table 30. Applications of bio-based Terephthalic acid (TPA).
Table 31. Biobased feedstock sources for 1,3 Proppanediol.
Table 32. Applications of bio-based 1,3 Proppanediol.
Table 33. Biobased feedstock sources for MEG.
Table 34. Applications of bio-based MEG.
Table 35. Biobased MEG producers capacities.
Table 36. Biobased feedstock sources for ethanol.
Table 37. Applications of bio-based ethanol.
Table 38. Applications of bio-based ethylene.
Table 39. Applications of bio-based propylene.
Table 40. Applications of bio-based vinyl chloride.
Table 41. Applications of bio-based Methly methacrylate.
Table 42. Applications of bio-based aniline.
Table 43. Applications of biobased fructose.
Table 44. Applications of bio-based 5-Hydroxymethylfurfural (5-HMF).
Table 45. Applications of 5-(Chloromethyl)furfural (CMF).
Table 46. Applications of Levulinic acid.
Table 47. Markets and applications for bio-based FDME.
Table 48. Applications of FDCA.
Table 49. Markets and applications for bio-based levoglucosenone.
Table 50. Biochemicals derived from hemicellulose
Table 51. Markets and applications for bio-based hemicellulose
Table 52. Markets and applications for bio-based furfuryl alcohol.
Table 53. Commercial and pre-commercial biorefinery lignin production facilities and processes
Table 54. Lignin aromatic compound products.
Table 55. Prices of benzene, toluene, xylene and their derivatives.
Table 56. Lignin products in polymeric materials.
Table 57. Application of lignin in plastics and composites.
Table 58. Markets and applications for bio-based glycerol.
Table 59. Markets and applications for Bio-based MPG.
Table 60. Markets and applications: Bio-based ECH.
Table 61. Mineral source products and applications.
Table 62. Type of biodegradation.
Table 63. Advantages and disadvantages of biobased plastics compared to conventional plastics.
Table 64. Types of Bio-based and/or Biodegradable Plastics, applications.
Table 65. Key market players by Bio-based and/or Biodegradable Plastic types.
Table 66. Polylactic acid (PLA) market analysis-manufacture, advantages, disadvantages and applications.
Table 67. Lactic acid producers and production capacities.
Table 68. PLA producers and production capacities.
Table 69. Planned PLA capacity expansions in China.
Table 70. Bio-based Polyethylene terephthalate (Bio-PET) market analysis- manufacture, advantages, disadvantages and applications.
Table 71. Bio-based Polyethylene terephthalate (PET) producers and production capacities,
Table 72. Polytrimethylene terephthalate (PTT) market analysis-manufacture, advantages, disadvantages and applications.
Table 73. Production capacities of Polytrimethylene terephthalate (PTT), by leading producers.
Table 74. Polyethylene furanoate (PEF) market analysis-manufacture, advantages, disadvantages and applications.
Table 75. PEF vs. PET.
Table 76. FDCA and PEF producers.
Table 77. Bio-based polyamides (Bio-PA) market analysis - manufacture, advantages, disadvantages and applications.
Table 78. Leading Bio-PA producers production capacities.
Table 79. Poly(butylene adipate-co-terephthalate) (PBAT) market analysis- manufacture, advantages, disadvantages and applications.
Table 80. Leading PBAT producers, production capacities and brands.
Table 81. Bio-PBS market analysis-manufacture, advantages, disadvantages and applications.
Table 82. Leading PBS producers and production capacities.
Table 83. Bio-based Polyethylene (Bio-PE) market analysis- manufacture, advantages, disadvantages and applications.
Table 84. Leading Bio-PE producers.
Table 85. Bio-PP market analysis- manufacture, advantages, disadvantages and applications.
Table 86. Leading Bio-PP producers and capacities.
Table 87.Types of PHAs and properties.
Table 88. Comparison of the physical properties of different PHAs with conventional petroleum-based polymers.
Table 89. Polyhydroxyalkanoate (PHA) extraction methods.
Table 90. Polyhydroxyalkanoates (PHA) market analysis.
Table 91. Commercially available PHAs.
Table 92. Markets and applications for PHAs.
Table 93. Applications, advantages and disadvantages of PHAs in packaging.
Table 94. Polyhydroxyalkanoates (PHA) producers.
Table 95. Microfibrillated cellulose (MFC) market analysis-manufacture, advantages, disadvantages and applications.
Table 96. Leading MFC producers and capacities.
Table 97. Synthesis methods for cellulose nanocrystals (CNC).
Table 98. CNC sources, size and yield.
Table 99. CNC properties.
Table 100. Mechanical properties of CNC and other reinforcement materials.
Table 101. Applications of nanocrystalline cellulose (NCC).
Table 102. Cellulose nanocrystals analysis.
Table 103: Cellulose nanocrystal production capacities and production process, by producer.
Table 104. Applications of cellulose nanofibers (CNF).
Table 105. Cellulose nanofibers market analysis.
Table 106. CNF production capacities (by type, wet or dry) and production process, by producer, metric tonnes.
Table 107. Applications of bacterial nanocellulose (BNC).
Table 108. Types of protein based-bioplastics, applications and companies.
Table 109. Types of algal and fungal based-bioplastics, applications and companies.
Table 110. Overview of alginate-description, properties, application and market size.
Table 111. Companies developing algal-based bioplastics.
Table 112. Overview of mycelium fibers-description, properties, drawbacks and applications.
Table 113. Companies developing mycelium-based bioplastics.
Table 114. Overview of chitosan-description, properties, drawbacks and applications.
Table 115. Global production of bioplastics in 2019-2035, by region, 1,000 tonnes.
Table 116. Biobased and sustainable plastics producers in North America.
Table 117. Biobased and sustainable plastics producers in Europe.
Table 118. Biobased and sustainable plastics producers in Asia-Pacific.
Table 119. Biobased and sustainable plastics producers in Latin America.
Table 120. Processes for bioplastics in packaging.
Table 121. Comparison of bioplastics’ (PLA and PHAs) properties to other common polymers used in product packaging.
Table 122. Typical applications for bioplastics in flexible packaging.
Table 123. Typical applications for bioplastics in rigid packaging.
Table 124. Technical lignin types and applications.
Table 125. Classification of technical lignins.
Table 126. Lignin content of selected biomass.
Table 127. Properties of lignins and their applications.
Table 128. Example markets and applications for lignin.
Table 129. Processes for lignin production.
Table 130. Biorefinery feedstocks.
Table 131. Comparison of pulping and biorefinery lignins.
Table 132. Commercial and pre-commercial biorefinery lignin production facilities and processes
Table 133. Market drivers and trends for lignin.
Table 134. Production capacities of technical lignin producers.
Table 135. Production capacities of biorefinery lignin producers.
Table 136. Estimated consumption of lignin, by type, 2019-2035 (000 MT).
Table 137. Estimated consumption of lignin, by market, 2019-2034 (000 MT).
Table 138. Prices of benzene, toluene, xylene and their derivatives.
Table 139. Application of lignin in plastics and polymers.
Table 140. Lactips plastic pellets.
Table 141. Oji Holdings CNF products.
Table 142. Types of natural fibers.
Table 143. Markets and applications for natural fibers.
Table 144. Commercially available natural fiber products.
Table 145. Market drivers for natural fibers.
Table 146. Typical properties of natural fibers.
Table 147. Overview of kapok fibers-description, properties, drawbacks and applications.
Table 148. Overview of luffa fibers-description, properties, drawbacks and applications.
Table 149. Overview of jute fibers-description, properties, drawbacks and applications.
Table 150. Overview of hemp fibers-description, properties, drawbacks and applications.
Table 151. Overview of flax fibers-description, properties, drawbacks and applications.
Table 152. Overview of ramie fibers-description, properties, drawbacks and applications.
Table 153. Overview of kenaf fibers-description, properties, drawbacks and applications.
Table 154. Overview of sisal fibers-description, properties, drawbacks and applications.
Table 155. Overview of abaca fibers-description, properties, drawbacks and applications.
Table 156. Overview of coir fibers-description, properties, drawbacks and applications.
Table 157. Overview of banana fibers-description, properties, drawbacks and applications.
Table 158. Overview of pineapple fibers-description, properties, drawbacks and applications.
Table 159. Overview of rice fibers-description, properties, drawbacks and applications.
Table 160. Overview of corn fibers-description, properties, drawbacks and applications.
Table 161. Overview of switch grass fibers-description, properties and applications.
Table 162. Overview of sugarcane fibers-description, properties, drawbacks and application and market size.
Table 163. Overview of bamboo fibers-description, properties, drawbacks and applications.
Table 164. Overview of mycelium fibers-description, properties, drawbacks and applications.
Table 165. Overview of chitosan fibers-description, properties, drawbacks and applications.
Table 166. Overview of alginate-description, properties, application and market size.
Table 167. Overview of silk fibers-description, properties, application and market size.
Table 168. Next-gen silk producers.
Table 169. Companies developing cellulose fibers for application in plastic composites.
Table 170. Microfibrillated cellulose (MFC) market analysis.
Table 171. Leading MFC producers and capacities.
Table 172. Cellulose nanocrystals market overview.
Table 173. Cellulose nanocrystal production capacities and production process, by producer.
Table 174. Cellulose nanofibers market analysis.
Table 175. CNF production capacities and production process, by producer, in metric tons.
Table 176. Processing and treatment methods for natural fibers used in plastic composites.
Table 177. Application, manufacturing method, and matrix materials of natural fibers.
Table 178. Properties of natural fiber-bio-based polymer compounds.
Table 179. Typical properties of short natural fiber-thermoplastic composites.
Table 180. Properties of non-woven natural fiber mat composites.
Table 181. Applications of natural fibers in plastics.
Table 182. Applications of natural fibers in the automotive industry.
Table 183. Natural fiber-reinforced polymer composite in the automotive market.
Table 184. Applications of natural fibers in packaging.
Table 185. Applications of natural fibers in construction.
Table 186. Applications of natural fibers in the appliances market.
Table 187. Applications of natural fibers in the consumer electronics market.
Table 188. Global market for natural fiber based plastics, 2018-2035, by end use sector (Billion USD).
Table 189. Global market for natural fiber based plastics, 2018-2035, by material type (Billion USD).
Table 190. Global market for natural fiber based plastics, 2018-2035, by plastic type (Billion USD).
Table 191. Global market for natural fiber based plastics, 2018-2035, by region (Billion USD).
Table 192. Granbio Nanocellulose Processes.
Table 193. Oji Holdings CNF products.
Table 194. Global trends and drivers in sustainable construction materials.
Table 195. Global revenues in sustainable construction materials, by materials type, 2020-2035 (millions USD).
Table 196. Global revenues in sustainable construction materials, by market, 2020-2035 (millions USD).
Table 197. Established bio-based construction materials.
Table 198. Types of self-healing concrete.
Table 199. General properties and value of aerogels.
Table 200. Key properties of silica aerogels.
Table 201. Chemical precursors used to synthesize silica aerogels.
Table 202. Commercially available aerogel-enhanced blankets.
Table 203. Main manufacturers of silica aerogels and product offerings.
Table 204. Typical structural properties of metal oxide aerogels.
Table 205. Polymer aerogels companies.
Table 206. Types of biobased aerogels.
Table 207. Carbon aerogel companies.
Table 208. Conversion pathway for CO2-derived building materials.
Table 209. Carbon capture technologies and projects in the cement sector
Table 210. Carbonation of recycled concrete companies.
Table 211. Current and projected costs for some key CO2 utilization applications in the construction industry.
Table 212. Market challenges for CO2 utilization in construction materials.
Table 213. Global Decarbonization Targets and Policies related to Green Steel.
Table 214. Estimated cost for iron and steel industry under the Carbon Border Adjustment Mechanism (CBAM).
Table 215. Hydrogen-based steelmaking technologies.
Table 216. Comparison of green steel production technologies.
Table 217. Advantages and disadvantages of each potential hydrogen carrier.
Table 218. CCUS in green steel production.
Table 219. Biochar in steel and metal.
Table 220. Hydrogen blast furnace schematic.
Table 221. Applications of microwave processing in green steelmaking.
Table 222. Applications of additive manufacturing (AM) in steelmaking.
Table 223. Technology readiness level (TRL) for key green steel production technologies.
Table 224. Properties of Green steels.
Table 225. Applications of green steel in the construction industry.
Table 226. Market trends in bio-based and sustainable packaging
Table 227. Drivers for recent growth in the bioplastics and biopolymers markets.
Table 228. Challenges for bio-based and sustainable packaging.
Table 229. Types of bio-based plastics and fossil-fuel-based plastics
Table 230. Comparison of synthetic fossil-based and bio-based polymers.
Table 231. Processes for bioplastics in packaging.
Table 232. PLA properties for packaging applications.
Table 233. Applications, advantages and disadvantages of PHAs in packaging.
Table 234. Major polymers found in the extracellular covering of different algae.
Table 235. Market overview for cellulose microfibers (microfibrillated cellulose) in paperboard and packaging-market age, key benefits, applications and producers.
Table 236. Applications of nanocrystalline cellulose (CNC).
Table 237. Market overview for cellulose nanofibers in packaging.
Table 238. Types of protein based-bioplastics, applications and companies.
Table 239. Overview of alginate-description, properties, application and market size.
Table 240. Companies developing algal-based bioplastics.
Table 241. Overview of mycelium fibers-description, properties, drawbacks and applications.
Table 242. Overview of chitosan-description, properties, drawbacks and applications.
Table 243. Bio-based naphtha markets and applications.
Table 244. Bio-naphtha market value chain.
Table 245. Pros and cons of different type of food packaging materials.
Table 246. Active Biodegradable Films films and their food applications.
Table 247. Intelligent Biodegradable Films.
Table 248. Edible films and coatings market summary.
Table 249. Summary of barrier films and coatings for packaging.
Table 250. Types of polyols.
Table 251. Polyol producers.
Table 252. Bio-based polyurethane coating products.
Table 253. Bio-based acrylate resin products.
Table 254. Polylactic acid (PLA) market analysis.
Table 255. Commercially available PHAs.
Table 256. Market overview for cellulose nanofibers in paints and coatings.
Table 257. Companies developing cellulose nanofibers products in paints and coatings.
Table 258. Types of protein based-biomaterials, applications and companies.
Table 259. CO2 utilization and removal pathways.
Table 260. CO2 utilization products developed by chemical and plastic producers.
Table 261. Comparison of bioplastics’ (PLA and PHAs) properties to other common polymers used in product packaging.
Table 262. Typical applications for bioplastics in flexible packaging.
Table 263. Typical applications for bioplastics in rigid packaging.
Table 264. Market revenues for bio-based coatings, 2018-2035 (billions USD), high estimate.
Table 265. Lactips plastic pellets.
Table 266. Oji Holdings CNF products.
Table 267. Properties and applications of the main natural fibres
Table 268. Types of sustainable alternative leathers.
Table 269. Properties of bio-based leathers.
Table 270. Comparison with conventional leathers.
Table 271. Price of commercially available sustainable alternative leather products.
Table 272. Comparative analysis of sustainable alternative leathers.
Table 273. Key processing steps involved in transforming plant fibers into leather materials.
Table 274. Current and emerging plant-based leather products.
Table 275. Companies developing plant-based leather products.
Table 276. Overview of mycelium-description, properties, drawbacks and applications.
Table 277. Companies developing mycelium-based leather products.
Table 278. Types of microbial-derived leather alternative.
Table 279. Companies developing microbial leather products.
Table 280. Companies developing plant-based leather products.
Table 281. Types of protein-based leather alternatives.
Table 282. Companies developing protein based leather.
Table 283. Companies developing sustainable coatings and dyes for leather -
Table 284. Markets and applications for bio-based textiles and leather.
Table 285. Applications of biobased leather in furniture and upholstery.
Table 286. Global revenues for bio-based textiles by type, 2018-2035 (millions USD).
Table 287. Global revenues for bio-based and sustainable textiles by end use market, 2018-2035 (millions USD).
Table 288. Market drivers and trends in bio-based and sustainable coatings.
Table 289. Example envinronmentally friendly coatings, advantages and disadvantages.
Table 290. Plant Waxes.
Table 291. Types of alkyd resins and properties.
Table 292. Market summary for bio-based alkyd coatings-raw materials, advantages, disadvantages, applications and producers.
Table 293. Bio-based alkyd coating products.
Table 294. Types of polyols.
Table 295. Polyol producers.
Table 296. Bio-based polyurethane coating products.
Table 297. Market summary for bio-based epoxy resins.
Table 298. Bio-based polyurethane coating products.
Table 299. Bio-based acrylate resin products.
Table 300. Polylactic acid (PLA) market analysis.
Table 301. PLA producers and production capacities.
Table 302. Polyhydroxyalkanoates (PHA) market analysis.
Table 303.Types of PHAs and properties.
Table 304. Polyhydroxyalkanoates (PHA) producers.
Table 305. Commercially available PHAs.
Table 306. Properties of micro/nanocellulose, by type.
Table 307: Types of nanocellulose.
Table 308. Microfibrillated Cellulose (MFC) production capacities in metric tons and production process, by producer, metric tons.
Table 309. Commercially available Microfibrillated Cellulose products.
Table 310. Market overview for cellulose nanofibers in paints and coatings.
Table 311. Market assessment for cellulose nanofibers in paints and coatings-application, key benefits and motivation for use, megatrends, market drivers, technology drawbacks, competing materials, material loading, main global paints and coatings OEMs.
Table 312. Companies developing CNF products in paints and coatings, applications targeted and stage of commercialization.
Table 313. CNC properties.
Table 314: Cellulose nanocrystal capacities (by type, wet or dry) and production process, by producer, metric tonnes.
Table 315. Applications of bacterial nanocellulose (BNC).
Table 316. Edible films and coatings market summary.
Table 317. Types of protein based-biomaterials, applications and companies.
Table 318. Overview of algal coatings-description, properties, application and market size.
Table 319. Companies developing algal-based plastics.
Table 320. Market revenues for bio-based coatings by market, 2018-2035 (billions USD), conservative estimate.
Table 321. Lactips plastic pellets.
Table 322. Oji Holdings CNF products.
Table 323. Market drivers for biofuels.
Table 324. Market challenges for biofuels.
Table 325. Liquid biofuels market 2020-2035, by type and production.
Table 326. Comparison of biofuels.
Table 327. Comparison of biofuel costs (USD/liter) 2023, by type.
Table 328. Categories and examples of solid biofuel.
Table 329. Comparison of biofuels and e-fuels to fossil and electricity.
Table 330. Classification of biomass feedstock.
Table 331. Biorefinery feedstocks.
Table 332. Feedstock conversion pathways.
Table 333. First-Generation Feedstocks.
Table 334. Lignocellulosic ethanol plants and capacities.
Table 335. Comparison of pulping and biorefinery lignins.
Table 336. Commercial and pre-commercial biorefinery lignin production facilities and processes
Table 337. Operating and planned lignocellulosic biorefineries and industrial flue gas-to-ethanol.
Table 338. Properties of microalgae and macroalgae.
Table 339. Yield of algae and other biodiesel crops.
Table 340. Advantages and disadvantages of biofuels, by generation.
Table 341. Biodiesel by generation.
Table 342. Biodiesel production techniques.
Table 343. Summary of pyrolysis technique under different operating conditions.
Table 344. Biomass materials and their bio-oil yield.
Table 345. Biofuel production cost from the biomass pyrolysis process.
Table 346. Properties of vegetable oils in comparison to diesel.
Table 347. Main producers of HVO and capacities.
Table 348. Example commercial Development of BtL processes.
Table 349. Pilot or demo projects for biomass to liquid (BtL) processes.
Table 350. Global biodiesel consumption, 2010-2035 (M litres/year).
Table 351. Global renewable diesel consumption, 2010-2035 (M litres/year).
Table 352. Renewable diesel price ranges.
Table 353. Advantages and disadvantages of Bio-aviation fuel.
Table 354. Production pathways for Bio-aviation fuel.
Table 355. Current and announced Bio-aviation fuel facilities and capacities.
Table 356. Global bio-jet fuel consumption 2019-2035 (Million litres/year).
Table 357. Bio-based naphtha markets and applications.
Table 358. Bio-naphtha market value chain.
Table 359. Bio-naphtha pricing against petroleum-derived naphtha and related fuel products.
Table 360. Bio-based Naphtha production capacities, by producer.
Table 361. Comparison of biogas, biomethane and natural gas.
Table 362. Processes in bioethanol production.
Table 363. Microorganisms used in CBP for ethanol production from biomass lignocellulosic.
Table 364. Ethanol consumption 2010-2035 (million litres).
Table 365. Biogas feedstocks.
Table 366. Existing and planned bio-LNG production plants.
Table 367. Methods for capturing carbon dioxide from biogas.
Table 368. Comparison of different Bio-H2 production pathways.
Table 369. Markets and applications for biohydrogen.
Table 370. Summary of gasification technologies.
Table 371. Overview of hydrothermal cracking for advanced chemical recycling.
Table 372. Applications of e-fuels, by type.
Table 373. Overview of e-fuels.
Table 374. Benefits of e-fuels.
Table 375. eFuel production facilities, current and planned.
Table 376. Main characteristics of different electrolyzer technologies.
Table 377. Market challenges for e-fuels.
Table 378. E-fuels companies.
Table 379. Algae-derived biofuel producers.
Table 380. Green ammonia projects (current and planned).
Table 381. Blue ammonia projects.
Table 382. Ammonia fuel cell technologies.
Table 383. Market overview of green ammonia in marine fuel.
Table 384. Summary of marine alternative fuels.
Table 385. Estimated costs for different types of ammonia.
Table 386. Main players in green ammonia.
Table 387. Market overview for CO2 derived fuels.
Table 388. Point source examples.
Table 389. Advantages and disadvantages of DAC.
Table 390. Companies developing airflow equipment integration with DAC.
Table 391. Companies developing Passive Direct Air Capture (PDAC) technologies.
Table 392. Companies developing regeneration methods for DAC technologies.
Table 393. DAC companies and technologies.
Table 394. DAC technology developers and production.
Table 395. DAC projects in development.
Table 396. Markets for DAC.
Table 397. Costs summary for DAC.
Table 398. Cost estimates of DAC.
Table 399. Challenges for DAC technology.
Table 400. DAC companies and technologies.
Table 401. Market overview for CO2 derived fuels.
Table 402. Main production routes and processes for manufacturing fuels from captured carbon dioxide.
Table 403. CO2-derived fuels projects.
Table 404. Thermochemical methods to produce methanol from CO2.
Table 405. pilot plants for CO2-to-methanol conversion.
Table 406. Microalgae products and prices.
Table 407. Main Solar-Driven CO2 Conversion Approaches.
Table 408. Market challenges for CO2 derived fuels.
Table 409. Companies in CO2-derived fuel products.
Table 410. Typical composition and physicochemical properties reported for bio-oils and heavy petroleum-derived oils.
Table 411. Properties and characteristics of pyrolysis liquids derived from biomass versus a fuel oil.
Table 412. Main techniques used to upgrade bio-oil into higher-quality fuels.
Table 413. Markets and applications for bio-oil.
Table 414. Bio-oil producers.
Table 415. Key resource recovery technologies
Table 416. Markets and end uses for refuse-derived fuels (RDF).
Table 417. Granbio Nanocellulose Processes.
Table 418. Key factors driving adoption of green electronics.
Table 419. Key circular economy strategies for electronics.
Table 420. Regulations pertaining to green electronics.
Table 421. Companies developing bio-based batteries for application in sustainable electronics.
Table 422. Benefits of Green Electronics Manufacturing
Table 423. Challenges in adopting Green Electronics manufacturing.
Table 424. Major chipmakers' renewable energy road maps.
Table 425. Energy efficiency in sustainable electronics manufacturing.
Table 426. Composition of plastic waste streams.
Table 427. Comparison of mechanical and advanced chemical recycling.
Table 428. Example chemically recycled plastic products.
Table 429. Bio-based and non-toxic materials in sustainable electronics.
Table 430. Key focus areas for enabling greener and ethically responsible electronics supply chains.
Table 431. Sustainability programs and disclosure from major electronics brands.
Table 432. PCB manufacturing process.
Table 433. Challenges in PCB manufacturing.
Table 434. 3D PCB manufacturing.
Table 435. Comparison of some sustainable PCB alternatives against conventional options in terms of key performance factors.
Table 436. Sustainable PCB supply chain.
Table 437. Key areas where the PCB industry can improve sustainability.
Table 438. Improving sustainability of PCB design.
Table 439. PCB design options for sustainability.
Table 440. Sustainability benefits and challenges associated with 3D printing.
Table 441. Conductive ink producers.
Table 442. Green and lead-free solder companies.
Table 443. Biodegradable substrates for PCBs.
Table 444. Overview of mycelium fibers-description, properties, drawbacks and applications.
Table 445. Application of lignin in composites.
Table 446. Properties of lignins and their applications.
Table 447. Properties of flexible electronics-cellulose nanofiber film (nanopaper).
Table 448. Companies developing cellulose nanofibers for electronics.
Table 449. Commercially available PHAs.
Table 450. Main limitations of the FR4 material system used for manufacturing printed circuit boards (PCBs).
Table 451. Halogen-free FR4 companies.
Table 452. Properties of biobased PCBs.
Table 453. Applications of flexible (bio) polyimide PCBs.
Table 454. Main patterning and metallization steps in PCB fabrication and sustainable options.
Table 455. Sustainability issues with conventional metallization processes.
Table 456. Benefits of print-and-plate.
Table 457. Sustainable alternative options to standard plating resists used in printed circuit board (PCB) fabrication.
Table 458. Applications for laser induced forward transfer
Table 459. Copper versus silver inks in laser-induced forward transfer (LIFT) for electronics fabrication.
Table 460. Approaches for in-situ oxidation prevention.
Table 461. Market readiness and maturity of different lead-free solders and electrically conductive adhesives (ECAs) for electronics manufacturing.
Table 462. Advantages of green electroless plating.
Table 463. Comparison of component attachment materials.
Table 464. Comparison between sustainable and conventional component attachment materials for printed circuit boards
Table 465. Comparison between the SMAs and SMPs.
Table 466. Comparison of conductive biopolymers versus conventional materials for printed circuit board fabrication.
Table 467. Comparison of curing and reflow processes used for attaching components in electronics assembly.
Table 468. Low temperature solder alloys.
Table 469. Thermally sensitive substrate materials.
Table 470. Limitations of existing IC production.
Table 471. Strategies for improving sustainability in integrated circuit (IC) manufacturing.
Table 472. Comparison of oxidation methods and level of sustainability.
Table 473. Stage of commercialization for oxides.
Table 474. Alternative doping techniques.
Table 475. Metal content mg / Kg in Printed Circuit Boards (PCBs) from waste desktop computers.
Table 476. Chemical recycling methods for handling electronic waste.
Table 477. Electrochemical processes for recycling metals from electronic waste
Table 478. Thermal recycling processes for electronic waste.
Table 479. Global PCB revenues 2018-2035 (billions USD), by substrate types.
Table 480. Global sustainable PCB revenues 2018-2035, by type (millions USD).
Table 481. Global sustainable ICs revenues 2018-2035, by type (millions USD).
Table 482. Oji Holdings CNF products.
Table 483. Global market revenues for bio-based adhesives & sealants, by types, 2018-2035 (millions USD).
Table 484. Global market revenues for bio-based adhesives & sealants, by market, 2018-2035 (millions USD).

Figure 1. Schematic of biorefinery processes.
Figure 2. Global production of starch for biobased chemicals and intermediates, 2018-2035 (million metric tonnes).
Figure 3. Global production of biobased lysine, 2018-2035 (metric tonnes).
Figure 4. Global glucose production for bio-based chemicals and intermediates 2018-2035 (million metric tonnes).
Figure 5. Global production volumes of bio-HMDA, 2018 to 2035 in metric tonnes.
Figure 6. Global production of bio-based DN5, 2018-2035 (metric tonnes).
Figure 7. Global production of bio-based isosorbide, 2018-2035 (metric tonnes).
Figure 8. L-lactic acid (L-LA) production, 2018-2035 (metric tonnes).
Figure 9. Global lactide production, 2018-2035 (metric tonnes).
Figure 10. Global production of bio-itaconic acid, 2018-2035 (metric tonnes).
Figure 11. Global production of 3-HP, 2018-2035 (metric tonnes).
Figure 12. Global production of bio-based acrylic acid, 2018-2035 (metric tonnes).
Figure 13. Global production of bio-based 1,3-Propanediol (1,3-PDO), 2018-2035 (metric tonnes).
Figure 14. Global production of bio-based Succinic acid, 2018-2035 (metric tonnes).
Figure 15. Global production of 1,4-Butanediol (BDO), 2018-2035 (metric tonnes).
Figure 16. Global production of bio-based tetrahydrofuran (THF), 2018-2035 (metric tonnes).
Figure 17. Overview of Toray process.
Figure 18. Global production of bio-based caprolactam, 2018-2035 (metric tonnes).
Figure 19. Global production of bio-based isobutanol, 2018-2035 (metric tonnes).
Figure 20. Global production of bio-based p-xylene, 2018-2035 (metric tonnes).
Figure 21. Global production of biobased terephthalic acid (TPA), 2018-2035 (metric tonnes).
Figure 22. Global production of biobased 1,3 Proppanediol, 2018-2035 (metric tonnes).
Figure 23. Global production of biobased MEG, 2018-2035 (metric tonnes).
Figure 24. Global production of biobased ethanol, 2018-2035 (million metric tonnes).
Figure 25. Global production of biobased ethylene, 2018-2035 (million metric tonnes).
Figure 26. Global production of biobased propylene, 2018-2035 (metric tonnes).
Figure 27. Global production of biobased vinyl chloride, 2018-2035 (metric tonnes).
Figure 28. Global production of bio-based Methly methacrylate, 2018-2035 (metric tonnes).
Figure 29. Global production of biobased aniline, 2018-2035 (metric tonnes).
Figure 30. Global production of biobased fructose, 2018-2035 (metric tonnes).
Figure 31. Global production of biobased 5-Hydroxymethylfurfural (5-HMF), 2018-2035 (metric tonnes).
Figure 32. Global production of biobased 5-(Chloromethyl)furfural (CMF), 2018-2035 (metric tonnes).
Figure 33. Global production of biobased Levulinic acid, 2018-2035 (metric tonnes).
Figure 34. Global production of biobased FDME, 2018-2035 (metric tonnes).
Figure 35. Global production of biobased Furan-2,5-dicarboxylic acid (FDCA), 2018-2035 (metric tonnes).
Figure 36. Global production projections for bio-based levoglucosenone from 2018 to 2035 in metric tonnes:
Figure 37. Global production of hemicellulose, 2018-2035 (metric tonnes).
Figure 38. Global production of biobased furfural, 2018-2035 (metric tonnes).
Figure 39. Global production of biobased furfuryl alcohol, 2018-2035 (metric tonnes).
Figure 40. Schematic of WISA plywood home.
Figure 41. Global production of biobased lignin, 2018-2035 (metric tonnes).
Figure 42. Global production of biobased glycerol, 2018-2035 (metric tonnes).
Figure 43. Global production of Bio-MPG, 2018-2035 (metric tonnes).
Figure 44. Global production of biobased ECH, 2018-2035 (metric tonnes).
Figure 45. Global production of biobased fatty acids, 2018-2035 (million metric tonnes).
Figure 46. Global production of biobased sebacic acid, 2018-2035 (metric tonnes).
Figure 47. Global production of biobased 11-Aminoundecanoic acid (11-AA), 2018-2035 (metric tonnes).
Figure 48. Global production of biobased Dodecanedioic acid (DDDA), 2018-2035 (metric tonnes).
Figure 49. Global production of biobased Pentamethylene diisocyanate, 2018-2035 (metric tonnes).
Figure 50. Global production of biobased casein, 2018-2035 (metric tonnes).
Figure 51. Global production of food waste for biochemicals, 2018-2035 (million metric tonnes).
Figure 52. Global production of agricultural waste for biochemicals, 2018-2035 (million metric tonnes).
Figure 53. Global production of forestry waste for biochemicals, 2018-2035 (million metric tonnes).
Figure 54. Global production of aquaculture/fishing waste for biochemicals, 2018-2035 (million metric tonnes).
Figure 55. Global production of municipal solid waste for biochemicals, 2018-2035 (million metric tonnes).
Figure 56. Global production of waste oils for biochemicals, 2018-2035 (million metric tonnes).
Figure 57. Global microalgae production, 2018-2035 (million metric tonnes).
Figure 58. Global macroalgae production, 2018-2035 (million metric tonnes).
Figure 59. Global production of biogas, 2018-2035 (billion m3).
Figure 60. Global production of syngas, 2018-2035 (billion m3).
Figure 61. formicobio™ technology.
Figure 62. Domsjö process.
Figure 63. TMP-Bio Process.
Figure 64. Lignin gel.
Figure 65. BioFlex process.
Figure 66. LX Process.
Figure 67. METNIN™ Lignin refining technology.
Figure 68. Enfinity cellulosic ethanol technology process.
Figure 69. Precision Photosynthesis™ technology.
Figure 70. Fabric consisting of 70 per cent wool and 30 per cent Qmilk.
Figure 71. UPM biorefinery process.
Figure 72. The Proesa® Process.
Figure 73. Goldilocks process and applications.
Figure 74. Coca-Cola PlantBottle®.
Figure 75. Interrelationship between conventional, bio-based and biodegradable plastics.
Figure 76. Polylactic acid (Bio-PLA) production 2019-2035 (1,000 tonnes).
Figure 77. Polyethylene terephthalate (Bio-PET) production 2019-2035 (1,000 tonnes)
Figure 78. Polytrimethylene terephthalate (PTT) production 2019-2035 (1,000 tonnes).
Figure 79. Production capacities of Polyethylene furanoate (PEF) to 2025.
Figure 80. Polyethylene furanoate (Bio-PEF) production 2019-2035 (1,000 tonnes).
Figure 81. Polyamides (Bio-PA) production 2019-2035 (1,000 tonnes).
Figure 82. Poly(butylene adipate-co-terephthalate) (Bio-PBAT) production 2019-2035 (1,000 tonnes).
Figure 83. Polybutylene succinate (PBS) production 2019-2035 (1,000 tonnes).
Figure 84. Polyethylene (Bio-PE) production 2019-2035 (1,000 tonnes).
Figure 85. Polypropylene (Bio-PP) production capacities 2019-2035 (1,000 tonnes).
Figure 86. PHA family.
Figure 87. TEM image of cellulose nanocrystals.
Figure 88. CNC preparation.
Figure 89. Extracting CNC from trees.
Figure 90. CNC slurry.
Figure 91. CNF gel.
Figure 92. Bacterial nanocellulose shapes
Figure 93. BLOOM masterbatch from Algix.
Figure 94. Typical structure of mycelium-based foam.
Figure 95. Commercial mycelium composite construction materials.
Figure 96. Global production capacities for bioplastics by region 2019-2035, 1,000 tonnes.
Figure 97. Global production capacities for bioplastics by end user market 2019-2035, 1,000 tonnes.
Figure 98. PHA bioplastics products.
Figure 99. The global market for biobased and biodegradable plastics for flexible packaging 2019-2033 (‘000 tonnes).
Figure 100. Production volumes for bioplastics for rigid packaging, 2019-2033 (‘000 tonnes).
Figure 101. Global production for biobased and biodegradable plastics in consumer products 2019-2035, in 1,000 tonnes.
Figure 102. Global production capacities for biobased and biodegradable plastics in automotive 2019-2035, in 1,000 tonnes.
Figure 103. Global production volumes for biobased and biodegradable plastics in building and construction 2019-2035, in 1,000 tonnes.
Figure 104. Global production volumes for biobased and biodegradable plastics in textiles 2019-2035, in 1,000 tonnes.
Figure 105. Global production volumes for biobased and biodegradable plastics in electronics 2019-2035, in 1,000 tonnes.
Figure 106. Biodegradable mulch films.
Figure 107. Global production volulmes for biobased and biodegradable plastics in agriculture 2019-2035, in 1,000 tonnes.
Figure 108. High purity lignin.
Figure 109. Lignocellulose architecture.
Figure 110. Extraction processes to separate lignin from lignocellulosic biomass and corresponding technical lignins.
Figure 111. The lignocellulose biorefinery.
Figure 112. LignoBoost process.
Figure 113. LignoForce system for lignin recovery from black liquor.
Figure 114. Sequential liquid-lignin recovery and purification (SLPR) system.
Figure 115. A-Recovery chemical recovery concept.
Figure 116. Schematic of a biorefinery for production of carriers and chemicals.
Figure 117. Organosolv lignin.
Figure 118. Hydrolytic lignin powder.
Figure 119. Estimated consumption of lignin, by type, 2019-2035 (000 MT).
Figure 120. Estimated consumption of lignin, by market, 2019-2035 (000 MT).
Figure 121. Pluumo.
Figure 122. ANDRITZ Lignin Recovery process.
Figure 123. Anpoly cellulose nanofiber hydrogel.
Figure 124. MEDICELLU™.
Figure 125. Asahi Kasei CNF fabric sheet.
Figure 126. Properties of Asahi Kasei cellulose nanofiber nonwoven fabric.
Figure 127. CNF nonwoven fabric.
Figure 128. Roof frame made of natural fiber.
Figure 129. Beyond Leather Materials product.
Figure 130. BIOLO e-commerce mailer bag made from PHA.
Figure 131. Reusable and recyclable foodservice cups, lids, and straws from Joinease Hong Kong Ltd., made with plant-based NuPlastiQ BioPolymer from BioLogiQ, Inc.
Figure 132. Fiber-based screw cap.
Figure 133. formicobio™ technology.
Figure 134. nanoforest-S.
Figure 135. nanoforest-PDP.
Figure 136. nanoforest-MB.
Figure 137. sunliquid® production process.
Figure 138. CuanSave film.
Figure 139. Celish.
Figure 140. Trunk lid incorporating CNF.
Figure 141. ELLEX products.
Figure 142. CNF-reinforced PP compounds.
Figure 143. Kirekira! toilet wipes.
Figure 144. Color CNF.
Figure 145. Rheocrysta spray.
Figure 146. DKS CNF products.
Figure 147. Domsjö process.
Figure 148. Mushroom leather.
Figure 149. CNF based on citrus peel.
Figure 150. Citrus cellulose nanofiber.
Figure 151. Filler Bank CNC products.
Figure 152. Fibers on kapok tree and after processing.
Figure 153. TMP-Bio Process.
Figure 154. Flow chart of the lignocellulose biorefinery pilot plant in Leuna.
Figure 155. Water-repellent cellulose.
Figure 156. Cellulose Nanofiber (CNF) composite with polyethylene (PE).
Figure 157. PHA production process.
Figure 158. CNF products from Furukawa Electric.
Figure 159. AVAPTM process.
Figure 160. GreenPower ™ process.
Figure 161. Cutlery samples (spoon, knife, fork) made of nano cellulose and biodegradable plastic composite materials.
Figure 162. Non-aqueous CNF dispersion "Senaf" (Photo shows 5% of plasticizer).
Figure 163. CNF gel.
Figure 164. Block nanocellulose material.
Figure 165. CNF products developed by Hokuetsu.
Figure 166. Marine leather products.
Figure 167. Inner Mettle Milk products.
Figure 168. Kami Shoji CNF products.
Figure 169. Dual Graft System.
Figure 170. Engine cover utilizing Kao CNF composite resins.
Figure 171. Acrylic resin blended with modified CNF (fluid) and its molded product (transparent film), and image obtained with AFM (CNF 10wt% blended).
Figure 172. Kel Labs yarn.
Figure 173. 0.3% aqueous dispersion of sulfated esterified CNF and dried transparent film (front side).
Figure 174. Lignin gel.
Figure 175. BioFlex process.
Figure 176. Nike Algae Ink graphic tee.
Figure 177. LX Process.
Figure 178. Made of Air's HexChar panels.
Figure 179. TransLeather.
Figure 180. Chitin nanofiber product.
Figure 181. Marusumi Paper cellulose nanofiber products.
Figure 182. FibriMa cellulose nanofiber powder.
Figure 183. METNIN™ Lignin refining technology.
Figure 184. IPA synthesis method.
Figure 185. MOGU-Wave panels.
Figure 186. CNF slurries.
Figure 187. Range of CNF products.
Figure 188. Reishi.
Figure 189. Compostable water pod.
Figure 190. Leather made from leaves.
Figure 191. Nike shoe with beLEAF™.
Figure 192. CNF clear sheets.
Figure 193. Oji Holdings CNF polycarbonate product.
Figure 194. Enfinity cellulosic ethanol technology process.
Figure 195. Fabric consisting of 70 per cent wool and 30 per cent Qmilk.
Figure 196. XCNF.
Figure 197: Plantrose process.
Figure 198. LOVR hemp leather.
Figure 199. CNF insulation flat plates.
Figure 200. Hansa lignin.
Figure 201. Manufacturing process for STARCEL.
Figure 202. Manufacturing process for STARCEL.
Figure 203. 3D printed cellulose shoe.
Figure 204. Lyocell process.
Figure 205. North Face Spiber Moon Parka.
Figure 206. PANGAIA LAB NXT GEN Hoodie.
Figure 207. Spider silk production.
Figure 208. Stora Enso lignin battery materials.
Figure 209. 2 wt.% CNF suspension.
Figure 210. BiNFi-s Dry Powder.
Figure 211. BiNFi-s Dry Powder and Propylene (PP) Complex Pellet.
Figure 212. Silk nanofiber (right) and cocoon of raw material.
Figure 213. Sulapac cosmetics containers.
Figure 214. Sulzer equipment for PLA polymerization processing.
Figure 215. Solid Novolac Type lignin modified phenolic resins.
Figure 216. Teijin bioplastic film for door handles.
Figure 217. Corbion FDCA production process.
Figure 218. Comparison of weight reduction effect using CNF.
Figure 219. CNF resin products.
Figure 220. UPM biorefinery process.
Figure 221. Vegea production process.
Figure 222. The Proesa® Process.
Figure 223. Goldilocks process and applications.
Figure 224. Visolis’ Hybrid Bio-Thermocatalytic Process.
Figure 225. HefCel-coated wood (left) and untreated wood (right) after 30 seconds flame test.
Figure 226. Worn Again products.
Figure 227. Zelfo Technology GmbH CNF production process.
Figure 228. Absolut natural based fiber bottle cap.
Figure 229. Adidas algae-ink tees.
Figure 230. Carlsberg natural fiber beer bottle.
Figure 231. Miratex watch bands.
Figure 232. Adidas Made with Nature Ultraboost 22.
Figure 233. PUMA RE:SUEDE sneaker
Figure 234. Types of natural fibers.
Figure 235. Luffa cylindrica fiber.
Figure 236. Pineapple fiber.
Figure 237. Typical structure of mycelium-based foam.
Figure 238. Commercial mycelium composite construction materials.
Figure 239. SEM image of microfibrillated cellulose.
Figure 240. Hemp fibers combined with PP in car door panel.
Figure 241. Car door produced from Hemp fiber.
Figure 242. Natural fiber composites in the BMW M4 GT4 racing car.
Figure 243. Mercedes-Benz components containing natural fibers.
Figure 244. SWOT analysis: natural fibers in the automotive market.
Figure 245. SWOT analysis: natural fibers in the packaging market.
Figure 246. SWOT analysis: natural fibers in the appliances market.
Figure 247. SWOT analysis: natural fibers in the appliances market.
Figure 248. SWOT analysis: natural fibers in the consumer electronics market.
Figure 249. SWOT analysis: natural fibers in the furniture market.
Figure 250. Global market for natural fiber based plastics, 2018-2035, by market (Billion USD).
Figure 251. Global market for natural fiber based plastics, 2018-2035, by material type (Billion USD).
Figure 252. Global market for natural fiber based plastics, 2018-2035, by plastic type (Billion USD).
Figure 253. Global market for natural fiber based plastics, 2018-2035, by region (Billion USD).
Figure 254. Asahi Kasei CNF fabric sheet.
Figure 255. Properties of Asahi Kasei cellulose nanofiber nonwoven fabric.
Figure 256. CNF nonwoven fabric.
Figure 257. Roof frame made of natural fiber.
Figure 258.Tras Rei chair incorporating ampliTex fibers.
Figure 259. Natural fibres racing seat.
Figure 260. Porche Cayman GT4 Clubsport incorporating BComp flax fibers.
Figure 261. Fiber-based screw cap.
Figure 262. Cellugy materials.
Figure 263. CuanSave film.
Figure 264. Trunk lid incorporating CNF.
Figure 265. ELLEX products.
Figure 266. CNF-reinforced PP compounds.
Figure 267. Kirekira! toilet wipes.
Figure 268. DKS CNF products.
Figure 269. Cellulose Nanofiber (CNF) composite with polyethylene (PE).
Figure 270. CNF products from Furukawa Electric.
Figure 271. Cutlery samples (spoon, knife, fork) made of nano cellulose and biodegradable plastic composite materials.
Figure 272. CNF gel.
Figure 273. Block nanocellulose material.
Figure 274. CNF products developed by Hokuetsu.
Figure 275. Dual Graft System.
Figure 276. Engine cover utilizing Kao CNF composite resins.
Figure 277. Acrylic resin blended with modified CNF (fluid) and its molded product (transparent film), and image obtained with AFM (CNF 10wt% blended).
Figure 278. Cellulomix production process.
Figure 279. Nanobase versus conventional products.
Figure 280. MOGU-Wave panels.
Figure 281. CNF clear sheets.
Figure 282. Oji Holdings CNF polycarbonate product.
Figure 283. A vacuum cleaner part made of cellulose fiber (left) and the assembled vacuum cleaner.
Figure 284. XCNF.
Figure 285. Manufacturing process for STARCEL.
Figure 286. 2 wt.% CNF suspension.
Figure 287. Sulapac cosmetics containers.
Figure 288. Comparison of weight reduction effect using CNF.
Figure 289. CNF resin products.
Figure 290. Global revenues in sustainable construction materials, by materials type, 2020-2035 (millions USD).
Figure 291. Global revenues in sustainable construction materials, by market, 2020-2035 (millions USD).
Figure 292. Luum Temple, constructed from Bamboo.
Figure 293. Typical structure of mycelium-based foam.
Figure 294. Commercial mycelium composite construction materials.
Figure 295. Self-healing concrete test study with cracked concrete (left) and self-healed concrete after 28 days (right).
Figure 296. Self-healing bacteria crack filler for concrete.
Figure 297. Self-healing bio concrete.
Figure 298. Microalgae based biocement masonry bloc.
Figure 299. Classification of aerogels.
Figure 300. Flower resting on a piece of silica aerogel suspended in mid air by the flame of a bunsen burner.
Figure 301. Monolithic aerogel.
Figure 302. Aerogel granules.
Figure 303. Internal aerogel granule applications.
Figure 304. 3D printed aerogels.
Figure 305. Lignin-based aerogels.
Figure 306. Fabrication routes for starch-based aerogels.
Figure 307. Graphene aerogel.
Figure 308. Schematic of CCUS in cement sector.
Figure 309. Carbon8 Systems’ ACT process.
Figure 310. CO2 utilization in the Carbon Cure process.
Figure 311. Share of (a) production, (b) energy consumption and (c) CO2 emissions from different steel making routes.
Figure 312. Transition to hydrogen-based production.
Figure 313. CO2 emissions from steelmaking (tCO2/ton crude steel).
Figure 314. CO2 emissions of different process routes for liquid steel.
Figure 315. Hydrogen Direct Reduced Iron (DRI) process.
Figure 316. Molten oxide electrolysis process.
Figure 317. Steelmaking with CCS.
Figure 318. Flash ironmaking process.
Figure 319. Hydrogen Plasma Iron Ore Reduction process.
Figure 320. Aizawa self-healing concrete.
Figure 321. ArcelorMittal decarbonization strategy.
Figure 322. Thermal Conductivity Performance of ArmaGel HT.
Figure 323. SLENTEX® roll (piece).
Figure 324. Biozeroc Biocement.
Figure 325. Carbon Re’s DeltaZero dashboard.
Figure 326. Neustark modular plant.
Figure 327. HIP AERO paint.
Figure 328. Sunthru Aerogel pane.
Figure 329. Quartzene®.
Figure 330. Schematic of HyREX technology.
Figure 331. EAF Quantum.
Figure 332. CNF insulation flat plates.
Figure 333. Global packaging market by material type.
Figure 334. Routes for synthesizing polymers from fossil-based and bio-based resources.
Figure 335. Organization and morphology of cellulose synthesizing terminal complexes (TCs) in different organisms.
Figure 336. Biosynthesis of (a) wood cellulose (b) tunicate cellulose and (c) BC.
Figure 337. Cellulose microfibrils and nanofibrils.
Figure 338. TEM image of cellulose nanocrystals.
Figure 339. CNC slurry.
Figure 340. CNF gel.
Figure 341. Bacterial nanocellulose shapes
Figure 342. BLOOM masterbatch from Algix.
Figure 343. Typical structure of mycelium-based foam.
Figure 344. Commercial mycelium composite construction materials.
Figure 345. Types of bio-based materials used for antimicrobial food packaging application.
Figure 346. Schematic of gas barrier properties of nanoclay film.
Figure 347. Hefcel-coated wood (left) and untreated wood (right) after 30 seconds flame test.
Figure 348. Applications for CO2.
Figure 349. Life cycle of CO2-derived products and services.
Figure 350. Conversion pathways for CO2-derived polymeric materials
Figure 351. Bioplastics for flexible packaging by bioplastic material type, 2019-2035 (‘000 tonnes).
Figure 352. Bioplastics for rigid packaging by bioplastic material type, 2019-2035 (‘000 tonnes).
Figure 353. Market revenues for bio-based coatings, 2018-2035 (billions USD), conservative estimate.
Figure 354. Pluumo.
Figure 355. Anpoly cellulose nanofiber hydrogel.
Figure 356. MEDICELLU™.
Figure 357. Asahi Kasei CNF fabric sheet.
Figure 358. Properties of Asahi Kasei cellulose nanofiber nonwoven fabric.
Figure 359. CNF nonwoven fabric.
Figure 360. Passionfruit wrapped in Xgo Circular packaging.
Figure 361. BIOLO e-commerce mailer bag made from PHA.
Figure 362. Reusable and recyclable foodservice cups, lids, and straws from Joinease Hong Kong Ltd., made with plant-based NuPlastiQ BioPolymer from BioLogiQ, Inc.
Figure 363. Fiber-based screw cap.
Figure 364. CuanSave film.
Figure 365. ELLEX products.
Figure 366. CNF-reinforced PP compounds.
Figure 367. Kirekira! toilet wipes.
Figure 368. Rheocrysta spray.
Figure 369. DKS CNF products.
Figure 370. Photograph (a) and micrograph (b) of mineral/ MFC composite showing the high viscosity and fibrillar structure.
Figure 371. PHA production process.
Figure 372. AVAPTM process.
Figure 373. GreenPower ™ process.
Figure 374. Cutlery samples (spoon, knife, fork) made of nano cellulose and biodegradable plastic composite materials.
Figure 375. CNF gel.
Figure 376. Block nanocellulose material.
Figure 377. CNF products developed by Hokuetsu.
Figure 378. Kami Shoji CNF products.
Figure 379. IPA synthesis method.
Figure 380. Compostable water pod.
Figure 381. XCNF.
Figure 382: Innventia AB movable nanocellulose demo plant.
Figure 383. Shellworks packaging containers.
Figure 384. Thales packaging incorporating Fibrease.
Figure 385. Sulapac cosmetics containers.
Figure 386. Sulzer equipment for PLA polymerization processing.
Figure 387. Silver / CNF composite dispersions.
Figure 388. CNF/nanosilver powder.
Figure 389. Corbion FDCA production process.
Figure 390. UPM biorefinery process.
Figure 391. Vegea production process.
Figure 392. Worn Again products.
Figure 393. S-CNF in powder form.
Figure 394. AlgiKicks sneaker, made with the Algiknit biopolymer gel.
Figure 395. Conceptual landscape of next-gen leather materials.
Figure 396. Typical structure of mycelium-based foam.
Figure 397. Hermès bag made of MycoWorks' mycelium leather.
Figure 398. Ganni blazer made from bacterial cellulose.
Figure 399. Bou Bag by GANNI and Modern Synthesis.
Figure 400. Global revenues for bio-based textiles by type, 2018-2035 (millions USD).
Figure 401. Global revenues for bio-based and sustainable textiles by end use market, 2018-2035 (millions USD).
Figure 402. Beyond Leather Materials product.
Figure 403. Treekind.
Figure 404. Examples of Stella McCartney and Adidas products made using leather alternative Mylo.
Figure 405. Mushroom leather.
Figure 406. Ecovative Design Forager Hides.
Figure 407. LUNA® leather.
Figure 408. TransLeather.
Figure 409. Reishi.
Figure 410. AirCarbon Pellets and AirCarbon Leather.
Figure 411. Leather made from leaves.
Figure 412. Nike shoe with beLEAF™.
Figure 413. Persiskin leather.
Figure 414. LOVR hemp leather.
Figure 415. North Face Spiber Moon Parka.
Figure 416. PANGAIA LAB NXT GEN Hoodie.
Figure 417. Ultrasuede headrest covers.
Figure 418. Vegea production process.
Figure 419. Schematic of production of powder coatings.
Figure 420. Organization and morphology of cellulose synthesizing terminal complexes (TCs) in different organisms.
Figure 421. PHA family.
Figure 422: Schematic diagram of partial molecular structure of cellulose chain with numbering for carbon atoms and n= number of cellobiose repeating unit.
Figure 423: Scale of cellulose materials.
Figure 424. Nanocellulose preparation methods and resulting materials.
Figure 425: Relationship between different kinds of nanocelluloses.
Figure 426. SEM image of microfibrillated cellulose.
Figure 427. Applications of cellulose nanofibers in paints and coatings.
Figure 428: CNC slurry.
Figure 429. Types of bio-based materials used for antimicrobial food packaging application.
Figure 430. BLOOM masterbatch from Algix.
Figure 431. Market revenues for bio-based coatings by market, 2018-2035 (billions USD), conservative estimate.
Figure 432. Dulux Better Living Air Clean Bio-based.
Figure 433. NCCTM Process.
Figure 434. CNC produced at Tech Futures’ pilot plant; cloudy suspension (1 wt.%), gel-like (10 wt.%), flake-like crystals, and very fine powder. Product advantages include:
Figure 435. Cellugy materials.
Figure 436. EcoLine® 3690 (left) vs Solvent-Based Competitor Coating (right).
Figure 437. Rheocrysta spray.
Figure 438. DKS CNF products.
Figure 439. Domsjö process.
Figure 440. CNF gel.
Figure 441. Block nanocellulose material.
Figure 442. CNF products developed by Hokuetsu.
Figure 443. VIVAPUR® MCC Spheres.
Figure 444. BioFlex process.
Figure 445. Marusumi Paper cellulose nanofiber products.
Figure 446. Melodea CNC barrier coating packaging.
Figure 447. Fluorene cellulose ® powder.
Figure 448. XCNF.
Figure 449. Plantrose process.
Figure 450. Spider silk production.
Figure 451. CNF dispersion and powder from Starlite.
Figure 452. 2 wt.% CNF suspension.
Figure 453. BiNFi-s Dry Powder.
Figure 454. BiNFi-s Dry Powder and Propylene (PP) Complex Pellet.
Figure 455. Silk nanofiber (right) and cocoon of raw material.
Figure 456. traceless® hooks.
Figure 457. HefCel-coated wood (left) and untreated wood (right) after 30 seconds flame test.
Figure 458. Bio-based barrier bags prepared from Tempo-CNF coated bio-HDPE film.
Figure 459. Bioalkyd products.
Figure 460. Liquid biofuel production and consumption (in thousands of m3), 2000-2022.
Figure 461. Distribution of global liquid biofuel production in 2023.
Figure 462. Diesel and gasoline alternatives and blends.
Figure 463. SWOT analysis for biofuels.
Figure 464. Schematic of a biorefinery for production of carriers and chemicals.
Figure 465. Hydrolytic lignin powder.
Figure 466. SWOT analysis for energy crops in biofuels.
Figure 467. SWOT analysis for agricultural residues in biofuels.
Figure 468. SWOT analysis for Manure, sewage sludge and organic waste in biofuels.
Figure 469. SWOT analysis for forestry and wood waste in biofuels.
Figure 470. Range of biomass cost by feedstock type.
Figure 471. Regional production of biodiesel (billion litres).
Figure 472. SWOT analysis for biodiesel.
Figure 473. Flow chart for biodiesel production.
Figure 474. Biodiesel (B20) average prices, current and historical, USD/litre.
Figure 475. Global biodiesel consumption, 2010-2035 (M litres/year).
Figure 476. SWOT analysis for renewable iesel.
Figure 477. Global renewable diesel consumption, 2010-2035 (M litres/year).
Figure 478. SWOT analysis for Bio-aviation fuel.
Figure 479. Global bio-jet fuel consumption to 2019-2035 (Million litres/year).
Figure 480. SWOT analysis for bio-naphtha.
Figure 481. Bio-based naphtha production capacities, 2018-2035 (tonnes).
Figure 482. SWOT analysis biomethanol.
Figure 483. Renewable Methanol Production Processes from Different Feedstocks.
Figure 484. Production of biomethane through anaerobic digestion and upgrading.
Figure 485. Production of biomethane through biomass gasification and methanation.
Figure 486. Production of biomethane through the Power to methane process.
Figure 487. SWOT analysis for ethanol.
Figure 488. Ethanol consumption 2010-2035 (million litres).
Figure 489. Properties of petrol and biobutanol.
Figure 490. Biobutanol production route.
Figure 491. Biogas and biomethane pathways.
Figure 492. Overview of biogas utilization.
Figure 493. Biogas and biomethane pathways.
Figure 494. Schematic overview of anaerobic digestion process for biomethane production.
Figure 495. Schematic overview of biomass gasification for biomethane production.
Figure 496. SWOT analysis for biogas.
Figure 497. Total syngas market by product in MM Nm³/h of Syngas, 2021.
Figure 498. SWOT analysis for biohydrogen.
Figure 499. Waste plastic production pathways to (A) diesel and (B) gasoline
Figure 500. Schematic for Pyrolysis of Scrap Tires.
Figure 501. Used tires conversion process.
Figure 502. Total syngas market by product in MM Nm³/h of Syngas, 2021.
Figure 503. Overview of biogas utilization.
Figure 504. Biogas and biomethane pathways.
Figure 505. SWOT analysis for chemical recycling of biofuels.
Figure 506. Process steps in the production of electrofuels.
Figure 507. Mapping storage technologies according to performance characteristics.
Figure 508. Production process for green hydrogen.
Figure 509. SWOT analysis for E-fuels.
Figure 510. E-liquids production routes.
Figure 511. Fischer-Tropsch liquid e-fuel products.
Figure 512. Resources required for liquid e-fuel production.
Figure 513. Levelized cost and fuel-switching CO2 prices of e-fuels.
Figure 514. Cost breakdown for e-fuels.
Figure 515. Pathways for algal biomass conversion to biofuels.
Figure 516. SWOT analysis for algae-derived biofuels.
Figure 517. Algal biomass conversion process for biofuel production.
Figure 518. Classification and process technology according to carbon emission in ammonia production.
Figure 519. Green ammonia production and use.
Figure 520. Schematic of the Haber Bosch ammonia synthesis reaction.
Figure 521. Schematic of hydrogen production via steam methane reformation.
Figure 522. SWOT analysis for green ammonia.
Figure 523. Estimated production cost of green ammonia.
Figure 524. Projected annual ammonia production, million tons.
Figure 525. CO2 capture and separation technology.
Figure 526. Conversion route for CO2-derived fuels and chemical intermediates.
Figure 527. Conversion pathways for CO2-derived methane, methanol and diesel.
Figure 528. SWOT analysis for biofuels from carbon capture.
Figure 529. CO2 captured from air using liquid and solid sorbent DAC plants, storage, and reuse.
Figure 530. Global CO2 capture from biomass and DAC in the Net Zero Scenario.
Figure 531. DAC technologies.
Figure 532. Schematic of Climeworks DAC system.
Figure 533. Climeworks’ first commercial direct air capture (DAC) plant, based in Hinwil, Switzerland.
Figure 534. Flow diagram for solid sorbent DAC.
Figure 535. Direct air capture based on high temperature liquid sorbent by Carbon Engineering.
Figure 536. Global capacity of direct air capture facilities.
Figure 537. Global map of DAC and CCS plants.
Figure 538. Schematic of costs of DAC technologies.
Figure 539. DAC cost breakdown and comparison.
Figure 540. Operating costs of generic liquid and solid-based DAC systems.
Figure 541. Conversion route for CO2-derived fuels and chemical intermediates.
Figure 542. Conversion pathways for CO2-derived methane, methanol and diesel.
Figure 543. CO2 feedstock for the production of e-methanol.
Figure 544. Schematic illustration of (a) biophotosynthetic, (b) photothermal, (c) microbial-photoelectrochemical, (d) photosynthetic and photocatalytic (PS/PC), (e) photoelectrochemical (PEC), and (f) photovoltaic plus electrochemical (PV EC) approaches for CO2.
Figure 545. SWOT analysis: CO2 utilization in fuels.
Figure 546. Audi synthetic fuels.
Figure 547. Bio-oil upgrading/fractionation techniques.
Figure 548. SWOT analysis for bio-oils.
Figure 549. ANDRITZ Lignin Recovery process.
Figure 550. ChemCyclingTM prototypes.
Figure 551. ChemCycling circle by BASF.
Figure 552. FBPO process
Figure 553. Direct Air Capture Process.
Figure 554. CRI process.
Figure 555. Cassandra Oil process.
Figure 556. Colyser process.
Figure 557. ECFORM electrolysis reactor schematic.
Figure 558. Dioxycle modular electrolyzer.
Figure 559. Domsjö process.
Figure 560. FuelPositive system.
Figure 561. INERATEC unit.
Figure 562. Infinitree swing method.
Figure 563. Audi/Krajete unit.
Figure 564. Enfinity cellulosic ethanol technology process.
Figure 565: Plantrose process.
Figure 566. Sunfire process for Blue Crude production.
Figure 567. Takavator.
Figure 568. O12 Reactor.
Figure 569. Sunglasses with lenses made from CO2-derived materials.
Figure 570. CO2 made car part.
Figure 571. The Velocys process.
Figure 572. Goldilocks process and applications.
Figure 573. The Proesa® Process.
Figure 574. Closed-loop manufacturing.
Figure 575. Sustainable supply chain for electronics.
Figure 576. Flexible PCB.
Figure 577. Vapor degreasing.
Figure 578. Multi-layered PCB.
Figure 579. 3D printed PCB.
Figure 580. In-mold electronics prototype devices and products.
Figure 581. Silver nanocomposite ink after sintering and resin bonding of discrete electronic components.
Figure 582. Typical structure of mycelium-based foam.
Figure 583. Flexible electronic substrate made from CNF.
Figure 584. CNF composite.
Figure 585. Oji CNF transparent sheets.
Figure 586. Electronic components using cellulose nanofibers as insulating materials.
Figure 587. BLOOM masterbatch from Algix.
Figure 588. Dell's Concept Luna laptop.
Figure 589. Direct-write, precision dispensing, and 3D printing platform for 3D printed electronics.
Figure 590. 3D printed circuit boards from Nano Dimension.
Figure 591. Photonic sintering.
Figure 592. Laser-induced forward transfer (LIFT).
Figure 593. Material jetting 3d printing.
Figure 594. Material jetting 3d printing product.
Figure 595. The molecular mechanism of the shape memory effect under different stimuli.
Figure 596. Supercooled Soldering™ Technology.
Figure 597. Reflow soldering schematic.
Figure 598. Schematic diagram of induction heating reflow.
Figure 599. Fully-printed organic thin-film transistors and circuitry on one-micron-thick polymer films.
Figure 600. Types of PCBs after dismantling waste computers and monitors.
Figure 601. Global PCB revenues 2018-2035 (billions USD), by substrate types.
Figure 602. Global sustainable PCB revenues 2018-2035, by type (millions USD).
Figure 603. Global sustainable ICs revenues 2018-2035, by type (millions USD).
Figure 604. Piezotech® FC.
Figure 605. PowerCoat® paper.
Figure 606. BeFC® biofuel cell and digital platform.
Figure 607. DPP-360 machine.
Figure 608. P-Flex® Flexible Circuit.
Figure 609. Fairphone 4.
Figure 610. In2tec’s fully recyclable flexible circuit board assembly.
Figure 611. C.L.A.D. system.
Figure 612. Soluboard immersed in water.
Figure 613. Infineon PCB before and after immersion.
Figure 614. Nano OPS Nanoscale wafer printing system.
Figure 615. Stora Enso lignin battery materials.
Figure 616. 3D printed electronics.
Figure 617. Tactotek IME device.
Figure 618. TactoTek® IMSE® SiP - System In Package.
Figure 619. Verde Bio-based resins.
Figure 620. Global market revenues for bio-based adhesives & sealants, by types, 2018-2035 (millions USD).
Figure 621. Global market revenues for bio-based adhesives & sealants, by market, 2018-2035 (millions USD).
Figure 622. sunliquid® production process.
Figure 623. Spider silk production.