The Latin America, Middle East and Africa Automatic Tube Cleaning System Market should witness market growth of 6.8% CAGR during the forecast period (2023-2029).
The optimal procedure is to physically cleanse the heat exchanger ducts once every 200 hours because scaling and fouling happen 200-400 hours after the last condenser tube manual cleaning. However, it's really expensive and useless to do this. Conventional cleaning techniques, like manual scrubbing, only provide a temporary fix and several difficulties. These traditional methods also require turning off the chiller, low productivity, and high labor costs. Additionally, tubes are harmed by an oversized brush or use an undersized brush that cannot eliminate fouling.
The presence of foulants in the water, like calcium sulfate, salts, calcium carbonate, and lime, frequently causes the heat exchanger and condenser tubes to micro-fouling. The process of heat exchange is significantly reduced when scale builds up because it acts as insulation. Depending on the heat exchanger/condenser service, this could result in a rise in turbine back pressure or other negative impacts. Unchecked, this usually causes shutdowns that demand manual cleaning in a small area. Manual tube cleaning can be time-consuming and frequently involves using abrasive brushes, harsh chemicals, or other pricey and time-consuming cleaning techniques.
The commercial and industrial sectors are gradually expanding in this region. Installing HVAC in industries like hospitality is one of the primary drivers of ATCS demand. For instance, Qatar built an outdoor stadium before the 2022 FIFA World Cup, complete with cooling systems to distribute cool air underneath each seat as well as on the sideline for resting and waiting athletes. Despite the 60% humidity and 110°F heat, continuously cool air is blown onto sidewalks and open-air markets to allow tourists visiting the UAE as well as Qatar to enjoy the outdoors. This extensive use of the HVAC system further requires the ATCS system for efficient working. Hence, the regional market will expand continuously throughout the forecasted period owing to the extensive use of HVAC systems and the growing industries.
The Brazil market dominated the LAMEA Automatic Tube Cleaning System Market by Country in 2022, and would continue to be a dominant market till 2029; thereby, achieving a market value of $2,741.9 Thousands by 2029. The Argentina market is experiencing a CAGR of 7.4% during (2023-2029). Additionally, The UAE market would experience a CAGR of 6.5% during (2023-2029).
Based on Application, the market is segmented into Power Generation, Commercial Spaces, Oil & Gas, Hospitality, and Others. Based on Type, the market is segmented into Automatic Ball Tube Cleaning System and Automatic Brush Tube Cleaning System. Based on countries, the market is segmented into Brazil, Argentina, UAE, Saudi Arabia, South Africa, Nigeria, and Rest of LAMEA.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Thermax Limited, Taprogge GmbH, E. Beaudrey and Cie., Ovivo, Inc. (SKion Water GmbH), Balltech Energy Ltd., Conco Services LLC, Innovas Technologies, LLC, WSA Engineered Systems, Inc., and Hydroball Technics Holdings Pte Ltd.
The optimal procedure is to physically cleanse the heat exchanger ducts once every 200 hours because scaling and fouling happen 200-400 hours after the last condenser tube manual cleaning. However, it's really expensive and useless to do this. Conventional cleaning techniques, like manual scrubbing, only provide a temporary fix and several difficulties. These traditional methods also require turning off the chiller, low productivity, and high labor costs. Additionally, tubes are harmed by an oversized brush or use an undersized brush that cannot eliminate fouling.
The presence of foulants in the water, like calcium sulfate, salts, calcium carbonate, and lime, frequently causes the heat exchanger and condenser tubes to micro-fouling. The process of heat exchange is significantly reduced when scale builds up because it acts as insulation. Depending on the heat exchanger/condenser service, this could result in a rise in turbine back pressure or other negative impacts. Unchecked, this usually causes shutdowns that demand manual cleaning in a small area. Manual tube cleaning can be time-consuming and frequently involves using abrasive brushes, harsh chemicals, or other pricey and time-consuming cleaning techniques.
The commercial and industrial sectors are gradually expanding in this region. Installing HVAC in industries like hospitality is one of the primary drivers of ATCS demand. For instance, Qatar built an outdoor stadium before the 2022 FIFA World Cup, complete with cooling systems to distribute cool air underneath each seat as well as on the sideline for resting and waiting athletes. Despite the 60% humidity and 110°F heat, continuously cool air is blown onto sidewalks and open-air markets to allow tourists visiting the UAE as well as Qatar to enjoy the outdoors. This extensive use of the HVAC system further requires the ATCS system for efficient working. Hence, the regional market will expand continuously throughout the forecasted period owing to the extensive use of HVAC systems and the growing industries.
The Brazil market dominated the LAMEA Automatic Tube Cleaning System Market by Country in 2022, and would continue to be a dominant market till 2029; thereby, achieving a market value of $2,741.9 Thousands by 2029. The Argentina market is experiencing a CAGR of 7.4% during (2023-2029). Additionally, The UAE market would experience a CAGR of 6.5% during (2023-2029).
Based on Application, the market is segmented into Power Generation, Commercial Spaces, Oil & Gas, Hospitality, and Others. Based on Type, the market is segmented into Automatic Ball Tube Cleaning System and Automatic Brush Tube Cleaning System. Based on countries, the market is segmented into Brazil, Argentina, UAE, Saudi Arabia, South Africa, Nigeria, and Rest of LAMEA.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Thermax Limited, Taprogge GmbH, E. Beaudrey and Cie., Ovivo, Inc. (SKion Water GmbH), Balltech Energy Ltd., Conco Services LLC, Innovas Technologies, LLC, WSA Engineered Systems, Inc., and Hydroball Technics Holdings Pte Ltd.
Scope of the Study
By Application
- Power Generation
- Commercial Spaces
- Oil & Gas
- Hospitality
- Others
By Type
- Automatic Ball Tube Cleaning System
- Automatic Brush Tube Cleaning System
By Country
- Brazil
- Argentina
- UAE
- Saudi Arabia
- South Africa
- Nigeria
- Rest of LAMEA
Key Market Players
List of Companies Profiled in the Report:
- Thermax Limited
- Taprogge GmbH
- E.Beaudrey and Cie.
- Ovivo, Inc. (SKion Water GmbH)
- Balltech Energy Ltd.
- Conco Services LLC
- Innovas Technologies, LLC
- WSA Engineered Systems, Inc.
- Hydroball Technics Holdings Pte Ltd.
Unique Offerings
- Exhaustive coverage
- The highest number of Market tables and figures
- Subscription-based model available
- Guaranteed best price
- Assured post sales research support with 10% customization free
Table of Contents
Chapter 1. Market Scope & Methodology
Chapter 2. Market Overview
Chapter 3. LAMEA Automatic Tube Cleaning System Market by Application
Chapter 4. LAMEA Automatic Tube Cleaning System Market by Type
Chapter 5. LAMEA Automatic Tube Cleaning System Market by Country
Chapter 6. Company Profiles
Companies Mentioned
- Thermax Limited
- Taprogge GmbH
- E. Beaudrey and Cie.
- Ovivo, Inc. (SKion Water GmbH)
- Balltech Energy Ltd.
- Conco Services LLC
- Innovas Technologies, LLC
- WSA Engineered Systems, Inc.
- Hydroball Technics Holdings Pte Ltd.
Methodology
LOADING...
