3D Printing Construction Market by Material Type (Concrete, Metal, Composite), Construction Method (Extrusion, Powder Bonding), End-Use Sector (Building, Infrastructure), Region (North America, Europe, APAC, ROW) - Global Forecast to 2024

1.1 Objectives of the Study
1.2 Market Definition
1.3 Market Scope
1.3.1 Regions Covered
1.3.2 Years Considered for the Study
1.4 Currency
1.5 Unit Considered
1.6 Stakeholders

2.1 Research Data
2.1.1 Secondary Data
2.1.1.1 Key Data From Secondary Sources
2.1.2 Primary Data
2.1.2.1 Key Data From Primary Sources
2.1.2.2 Key Industry Insights
2.1.2.3 Breakdown of Primary Interviews
2.2 Market Size Estimation
2.2.1 Bottom-Up Approach
2.2.1.1 Top-Down Approach
2.3 Data Triangulation
2.4 Assumptions
2.5 Limitations

4.1 Attractive Opportunities in the 3D Printing Construction Market
4.2 3D Printing Construction Market, By Material Type and Region
4.3 3D Printing Construction Market, By End-Use Sector
4.4 3D Printing Construction Market, By Construction Method
4.5 3D Printing Construction Market, By Country

5.1 Introduction
5.2 Market Dynamics
5.2.1 Drivers
5.2.1.1 Potential for Mass Customization and Enhanced Architectural Flexibility
5.2.1.2 Reduction in Health & Safety Risks and Rate of Accidents
5.2.1.3 Inherently Green Technology
5.2.2 Restraints
5.2.2.1 High Capital Investment
5.2.3 Opportunities
5.2.3.1 Rise in Demand for New Construction Projects Across Regions
5.2.3.2 Rapid Urbanization
5.2.4 Challenges
5.2.4.1 Increase the Awareness About Automation Techniques in the Construction Industry
5.2.4.2 Smooth Surface Finish
5.2.4.3 Limited Size of the Printers
5.2.4.4 Partially Built Houses
5.3 Porter’s Five Forces Analysis
5.3.1 Threat of Substitutes
5.3.2 Threat of New Entrants
5.3.3 Bargaining Power of Suppliers
5.3.4 Bargaining Power of Buyers
5.3.5 Intensity of Competitive Rivalry
5.4 Macroeconomic Indicators
5.4.1 Introduction
5.4.2 Rising Population
5.4.3 Increase in Middle-Class Population, 2009–2030
5.4.4 Trends and Forecast of GDP
5.4.5 Contribution of the Construction Industry to the GDP, By Country

6.1 Introduction
6.2 Concrete
6.2.1 Concrete Material Dominates the 3D Printing Construction Market
6.3 Metal
6.3.1 Metal Provides Higher Mechanical Strength and Cost-Benefit in 3D Printing Construction
6.4 Composite
6.4.1 Composite is the Second-Largest Segment in the 3D Printing Construction Market
6.5 Others

7.1 Introduction
7.2 Extrusion
7.2.1 Extrusion is One of the Most Widely Used 3D Printing Construction Methods
7.3 Powder Bonding
7.3.1 Powder Bonding Construction Method is Highly Suitable for Off-Site Process

8.1 Introduction
8.2 Building
8.2.1 The Ability of 3D Printing Technology to Develop Complex Building Geometries is Driving Its Demand in the Segment
8.3 Infrastructure
8.3.1 Design Flexibility is A Key Feature Driving the Market in the Infrastructure Segment

9.1 Introduction
9.2 Europe
9.2.1 Russia
9.2.1.1 Increasing Government’s Focus on the Development of Affordable Housing is Positively Influencing the Market in Russia
9.2.2 France
9.2.2.1 France is One of the Most Dominant Economies in Europe
9.2.3 Denmark
9.2.3.1 Growing Demand for New Residential Construction Activities and Time-Saving Building Solutions are Likely to Drive the Market in Denmark
9.2.4 Spain
9.2.4.1 Increasing Demand for Affordable Houses is Driving the Market in the Building Segment in Spain
9.2.5 Netherlands
9.2.5.1 Increased Private and Government Investments in Various Sectors are Likely to Drive the Market in the Country
9.2.6 Italy
9.2.6.1 Growing Demand for Cost-Effective and Time-Saving Construction Methods is Resulting in the Market Growth in Italy
9.3 RoW
9.3.1 UAE
9.3.1.1 The UAE Represents Vast 3D Printing Technology in the Construction Sector
9.3.2 Saudi Arabia
9.3.2.1 Saudi Arabia is the Largest and Fastest-Growing 3D Printing Construction Market in RoW
9.4 APAC
9.4.1 China
9.4.1.1 China Dominates the 3D Printing Construction Market in the APAC Region
9.4.2 Thailand
9.4.2.1 3D Printing Construction is at the Initial Stage in Thailand
9.5 North America
9.5.1 US
9.5.1.1 Need for Affordable and Safe Housing Drives the 3D Printing Construction Market in the US
9.5.2 El Salvador
9.5.2.1 El Salvador is the Potential 3D Printing Construction Market in the North American Region
9.6 Other Potential Markets
9.6.1 India
9.6.2 Japan
9.6.3 Brazil
9.6.4 Egypt

10.1 Introduction
10.1.1 Competitive Leadership Mapping
10.1.1.1 Visionary Leaders
10.1.1.2 Dynamic Differentiators
10.1.1.3 Emerging Companies
10.1.1.4 Innovators
10.1.2 Strength of Product Portfolio
10.1.3 Business Strategy Excellence
10.1.4 Market Ranking
10.2 Competitive Scenario
10.2.1 New Project
10.2.2 Partnership
10.2.3 Expansion
10.2.4 Joint Venture
10.2.5 Agreement
10.2.6 Product Launch
10.2.7 Investment
10.2.8 Contract

11.1 Yingchuang Building Technique (Winsun)
11.2 Xtreee
11.3 Apis Cor
11.4 Monolite UK (D-Shape)
11.5 Csp S.R.L. (Centro Sviluppo Progetti)
11.6 CyBe Construction
11.7 Sika
11.8 Mx3D
11.9 Contour Crafting
11.10 Icon
11.11 Other Players
11.11.1 Betabram
11.11.2 Rohaco
11.11.3 Imprimere Ag
11.11.4 Beijing Huashang Luhai Technology
11.11.5 Total Kustom
11.11.6 Spetsavia
11.11.7 Lifetec Construction Group Inc
11.11.8 Be More 3D
11.11.9 3D Printhuset
11.11.10 Acciona

12.1 Discussion Guide
12.2 Knowledge Store: Subscription Portal
12.3 Available Customizations
12.4 Related Reports
12.5 Author Details

Table 1 GDP (Current Prices), By Country, 2015–2022 (USD Billion)
Table 2 North America: Contribution of the Construction Industry to GDP, By Country, 2014–2024 (USD Billion)
Table 3 Europe: Contribution of Construction Industry to GDP, By Country, 2014–2024 (USD Billion)
Table 4 APAC: Contribution of Construction Industry to GDP, By Country, 2014–2024 (USD Billion)
Table 5 Middle East & Africa: Contribution of Construction Industry to GDP, By Country, 2014–2024 (USD Billion)
Table 6 3D Printing Construction Market Size, By Material Type, 2017–2024 (USD Thousand)
Table 7 3D Printing Construction Market Size, By Material Type, 2017–2024 (Square Meter)
Table 8 Concrete 3D Printing Construction Market Size, By Region, 2017–2024 (USD Thousand)
Table 9 Concrete 3D Printing Construction Market Size, By Region, 2017–2024 (Square Meter)
Table 10 Metal 3D Printing Construction Market Size, By Region, 2017–2024 (USD Thousand)
Table 11 Metal 3D Printing Construction Market Size, By Region, 2017–2024 (Square Meter)
Table 12 Composite 3D Printing Construction Market Size, By Region, 2017–2024 (USD Thousand)
Table 13 Composite 3D Printing Construction Market Size, By Region, 2017–2024 (Square Meter)
Table 14 Other 3D Printing Construction Materials Market Size, By Region, 2017–2024 (USD Thousand)
Table 15 Other 3D Printing Construction Materials Market Size, By Region, 2017–2024 (Square Meter)
Table 16 3D Printing Construction Market Size, By Construction Method, 2017–2024 (USD Thousand)
Table 17 3D Printing Construction Market Size, By Construction Method, 2017–2024 (Square Meter)
Table 18 3D Printing Extruded Construction Market Size, By Region, 2017–2024 (USD Thousand)
Table 19 3D Printing Extruded Construction Market Size, By Region, 2017–2024 (Square Meter)
Table 20 3D Printing Powder-Bonding Construction Market Size, By Region, 2017–2024 (USD Thousand)
Table 21 3D Printing Powder-Bonding Construction Market Size, By Region, 2017–2024 (Square Meter)
Table 22 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 23 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 24 3D Printing Construction Market Size in Building, By Region, 2017–2024 (USD Thousand)
Table 25 3D Printing Construction Market Size in Building, By Region, 2017–2024 (Square Meter)
Table 26 3D Printing Construction Market Size in Infrastructure, By Region, 2017–2024 (USD Thousand)
Table 27 3D Printing Construction Market Size in Infrastructure, By Region, 2017–2024 (Square Meter)
Table 28 3D Printing Construction Market Size, By Region, 2017–2024 (USD Thousand)
Table 29 3D Printing Construction Market Size, By Region, 2017–2024 (Square Meter)
Table 30 Europe: 3D Printing Construction Market Size, By Country, 2017–2024 (USD Thousand)
Table 31 Europe: 3D Printing Construction Market Size, By Country, 2017–2024 (Square Meter)
Table 32 Europe: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 33 Europe: 3D Printing Construction Market Size, By End-Use Sector, 2016–2023 (Square Meter)
Table 34 3D-Printed Projects in Russia
Table 35 3D-Printed Projects in France
Table 36 France: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 37 France: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 38 3D-Printed Projects in Denmark
Table 39 3D-Printed Projects in Spain
Table 40 3D-Printed Projects in the Netherlands
Table 41 Netherlands: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 42 Netherlands: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 43 3D-Printed Projects in Italy
Table 44 RoW: 3D Printing Construction Market Size, By Country, 2017–2024 (USD Thousand)
Table 45 RoW: 3D Printing Construction Market Size, By Country, 2017–2024 (Square Meter)
Table 46 RoW: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 47 RoW: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 48 3D-Printed Projects in UAE
Table 49 UAE: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 50 UAE: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 51 Saudi Arabia: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 52 Saudi Arabia: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 53 APAC: 3D Printing Construction Market Size, By Country, 2017–2024 (USD Thousand)
Table 54 APAC: 3D Printing Construction Market Size, By Country, 2017–2024 (Square Meter)
Table 55 APAC: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 56 APAC: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 57 3D-Printed Projects in China
Table 58 China: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 59 China: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 60 North America: 3D Printing Construction Market Size, By Country, 2017–2024 (USD Thousand)
Table 61 North America: 3D Printing Construction Market Size, By Country, 2017–2024 (Square Meter)
Table 62 North America: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 63 North America: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 64 3D-Printed Projects in the Us
Table 65 US: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (USD Thousand)
Table 66 US: 3D Printing Construction Market Size, By End-Use Sector, 2017–2024 (Square Meter)
Table 67 New Project, 2015–2018
Table 68 Partnership, 2016–2019
Table 69 Expansion, 2015–2019
Table 70 Joint Venture, 2016–2017
Table 71 Agreement, 2016–2017
Table 72 Product Launch, 2015
Table 73 Investment, 2017
Table 74 Contract, 2018

Figure 1 3D Printing Construction Market Segmentation
Figure 2 3D Printing Construction: Research Design
Figure 3 Market Size Estimation: Bottom-Up Approach
Figure 4 Market Size Estimation: Top-Down Approach
Figure 5 3D Printing Construction Market: Data Triangulation
Figure 6 Building Sector to Grow at A Faster CAGR During the Forecast Year
Figure 7 Extrusion Segment is Estimated to Dominate the 3D Printing Construction Market
Figure 8 Concrete Material is Estimated to Dominate the 3D Printing Construction Market in 2018
Figure 9 Europe Accounted for the Largest Share in the 3D Printing Construction Market in 2018
Figure 10 Saudi Arabia to Be the Fastest-Growing 3D Printing Construction Market
Figure 11 High Demand From the Building Sector to Drive the Market
Figure 12 Europe Accounted for the Largest Market Share
Figure 13 Building Sector to Dominate the Overall 3D Printing Construction Market
Figure 14 Extrusion Accounts for the Larger Share of the Overall 3D Printing Construction Market
Figure 15 Saudi Arabia to Register the Highest CAGR in the 3D Printing Construction Market
Figure 16 Drivers, Restraints, Opportunities, and Challenges in the 3D Printing Construction Market
Figure 17 3D Printing Construction Market: Porter’s Five Forces Analysis
Figure 18 Concrete Remains the Widely Used Material Type for 3D Printing Construction
Figure 19 APAC to Register the Highest CAGR in the Concrete Material Segment
Figure 20 Extrusion to Be the Widely Used Construction Method for 3D Construction Printing
Figure 21 APAC to Register A High CAGR for Extrusion Construction Method
Figure 22 Building to Be the Leading End-User Segment in the Market
Figure 23 APAC to Be the Second-Fastest Growing Market in the Building Segment
Figure 24 Saudi Arabia is Projected to Be the Fastest-Growing Country-Level Market, 2019–2024
Figure 25 Europe: 3D Printing Construction Market Snapshot
Figure 26 APAC: 3D Printing Construction Market Snapshot
Figure 27 North America: 3D Printing Construction Market Snapshot
Figure 28 New Project is the Most Adopted Key Growth Strategy Between 2015 and 2018
Figure 29 3D Printing Construction Market: Competitive Leadership Mapping, 2018
Figure 30 Yingchuang Building Technique (Winsun): SWOT Analysis
Figure 31 Xtreee: SWOT Analysis
Figure 32 Apis Cor: SWOT Analysis
Figure 33 Monolite UK (D-Shape): SWOT Analysis
Figure 34 Sika: Company Snapshot