The global market for Integrated Gate-Commutated Thyristors (IGCT) was estimated at US$19.9 Million in 2023 and is projected to reach US$29.0 Million by 2030, growing at a CAGR of 5.5% from 2023 to 2030. This comprehensive report provides an in-depth analysis of market trends, drivers, and forecasts, helping you make informed business decisions.
The significance of IGCTs lies in their ability to handle extremely high power with greater efficiency, faster switching times, and lower power losses compared to traditional semiconductor devices like Insulated-Gate Bipolar Transistors (IGBTs) or Gate Turn-Off Thyristors (GTOs). IGCTs are particularly valued in applications such as renewable energy systems, including wind turbines and solar power converters, where they contribute to converting and transmitting energy with minimal losses. With the increasing demand for energy-efficient solutions in high-power applications, IGCTs are emerging as a cornerstone technology in industries ranging from power generation and transmission to transportation and industrial automation.
Another key development is the improvement in cooling systems and thermal management for IGCTs. Since these devices handle extremely high currents and voltages, they generate a significant amount of heat during operation. Advances in cooling technologies, such as direct liquid cooling and advanced heat sinks, have significantly improved the thermal performance of IGCTs. These solutions enable better heat dissipation, allowing IGCTs to operate at higher power levels without overheating. Improved thermal management extends the lifespan of IGCTs and enhances their reliability, which is especially important in industrial applications where downtime and equipment failure can be costly.
Advances in semiconductor material science have also played a critical role in enhancing the performance of IGCTs. The development of new silicon-based materials with higher breakdown voltages and improved electrical conductivity has enabled IGCTs to handle even higher voltages and currents. Additionally, researchers are exploring the potential of wide-bandgap materials, such as silicon carbide (SiC) and gallium nitride (GaN), which could further improve the efficiency and thermal stability of IGCTs in the future. These materials promise to enable IGCTs to operate at higher temperatures and frequencies, reducing energy losses and improving overall system efficiency.
A significant improvement in IGCTs is the reduction in conduction and switching losses, which has been achieved through optimized device design and manufacturing processes. Modern IGCTs exhibit lower on-state voltage drops, which reduces the power dissipated as heat during conduction. This improvement enhances the efficiency of power conversion systems, such as inverters and converters used in renewable energy applications like wind turbines and solar farms. Reducing conduction losses is critical for improving the overall energy efficiency of high-power systems, which is increasingly important as industries and governments seek to reduce carbon emissions and energy consumption.
Digital control systems and intelligent gate drives have also improved the performance and versatility of IGCTs. By integrating digital control into IGCT systems, engineers can monitor real-time operating conditions and adjust switching parameters for optimal performance. This allows IGCTs to operate more efficiently under varying load conditions and to adapt to changes in the electrical grid or industrial systems. Additionally, intelligent gate drives can provide real-time diagnostics and predictive maintenance information, helping operators identify potential failures before they occur and improving system reliability. In applications such as HVDC (high-voltage direct current) transmission and industrial drives, these features are invaluable for maintaining continuous operation and reducing downtime.
Another advancement in IGCT technology is the development of modular IGCT systems, which offer greater flexibility and scalability for different power levels and applications. Modular IGCT systems can be configured in parallel or series, allowing for higher voltage and current handling capabilities. This flexibility is crucial in power electronics systems like HVDC transmission, where power requirements can vary greatly depending on the distance and capacity of the transmission line. Modular IGCTs also simplify maintenance and replacement, as individual modules can be swapped out without affecting the overall system, improving operational efficiency in industrial and energy applications.
Improvements in packaging and design have also contributed to the increased reliability and performance of IGCTs. Modern IGCTs are designed with compact, rugged packaging that enhances their mechanical stability and resistance to environmental stressors like vibration, dust, and moisture. This makes IGCTs suitable for use in harsh environments such as heavy industry, mining, and marine applications. The compact design also allows for higher power density, meaning that more power can be managed in a smaller footprint, which is particularly important in space-constrained applications like rail transportation and offshore energy systems.
In the field of renewable energy, IGCTs have benefitted from advancements in power grid integration and energy storage systems. The role of IGCTs in converting and managing the fluctuating power generated by renewable sources like wind and solar is critical for maintaining grid stability. By improving the efficiency and responsiveness of IGCTs, these systems can handle the variable output of renewable energy sources more effectively, ensuring that power is transmitted and distributed efficiently. In addition, IGCTs are increasingly being used in energy storage systems, where they help manage the charging and discharging of large-scale battery systems, further enhancing the stability and reliability of modern power grids.
In industrial automation, IGCTs are indispensable for controlling high-power motors and drives used in manufacturing, mining, and heavy industries. These industries rely on motors and drives to power machinery that requires precise control of speed and torque, often under challenging conditions involving high loads and variable demands. IGCTs are capable of providing the necessary switching speeds and power management required for these high-torque applications, while also ensuring energy efficiency. In industries where power consumption is a significant cost factor, the ability of IGCTs to reduce energy losses during operation directly contributes to cost savings and operational efficiency.
IGCTs are also essential in the transportation sector, particularly in rail and electric vehicle (EV) applications. In high-speed trains and electric locomotives, IGCTs are used in traction converters to control the flow of electrical power to the train's motors. These traction systems require high-power semiconductors that can operate reliably under heavy loads and variable conditions, and IGCTs provide the performance and durability needed to ensure smooth, efficient operation. The high switching speeds of IGCTs help improve energy efficiency, reducing the overall power consumption of rail networks, which is particularly important in countries with extensive electric rail systems.
In electric vehicle (EV) infrastructure, IGCTs are used in high-power charging stations, where they manage the conversion of grid power to the appropriate voltage and current levels needed to charge EV batteries quickly and safely. The ability of IGCTs to handle high power densities and switch quickly ensures that EV charging stations can deliver fast charging times without overloading the electrical grid. As the adoption of EVs continues to grow, the need for efficient power conversion and management in charging infrastructure is becoming increasingly important, and IGCTs are expected to play a key role in supporting the expansion of this critical infrastructure.
In renewable energy applications, IGCTs are crucial for managing the conversion and distribution of power generated by wind, solar, and hydroelectric systems. These energy sources produce variable power output depending on environmental conditions, and IGCTs are used in power converters and inverters to stabilize this power before it is transmitted to the grid. Their ability to switch rapidly and handle high voltages makes them ideal for smoothing out fluctuations in renewable energy output, ensuring that power is efficiently integrated into the grid. As the world transitions to more sustainable energy sources, IGCTs will be essential in optimizing the performance and reliability of renewable energy systems.
IGCTs are also critical for marine and offshore applications, where power systems must be highly reliable and capable of withstanding harsh environmental conditions. In offshore oil platforms, ships, and submarines, IGCTs are used in power conversion systems to manage the flow of electricity between various on-board systems. These environments require power electronics that can handle high voltages, operate reliably in corrosive conditions, and manage power distribution efficiently. IGCTs, with their rugged design and high efficiency, are well-suited for these demanding applications, ensuring that power systems remain operational even in extreme conditions.
The flexibility and scalability of IGCTs make them suitable for a wide range of applications, from large industrial systems to renewable energy installations and transportation networks. Their ability to manage high power with minimal losses, combined with their reliability and fast switching capabilities, makes them indispensable for industries where energy efficiency, performance, and durability are critical.
The expansion of renewable energy infrastructure is another key factor driving the growth of the IGCT market. With governments and industries investing heavily in wind, solar, and hydroelectric power, there is a growing need for high-power semiconductor devices that can efficiently manage the conversion and distribution of renewable energy. IGCTs are ideally suited for these applications due to their ability to handle variable power output and integrate renewable energy into the grid with minimal losses. As countries continue to increase their renewable energy capacity, the demand for IGCTs is expected to rise in parallel.
The electrification of transportation, particularly in rail systems and electric vehicles, is also contributing to the growth of the IGCT market. High-speed trains, electric locomotives, and electric vehicles require advanced power electronics to manage energy efficiently and ensure reliable operation. IGCTs, with their ability to handle high currents and voltages while maintaining fast switching speeds, are crucial for the performance and efficiency of traction systems and charging infrastructure. As more countries invest in electrified transportation networks and EV infrastructure, the demand for IGCTs in these sectors is expected to grow significantly.
Advancements in industrial automation and the growing trend toward smart manufacturing are also driving the adoption of IGCTs. In industries such as manufacturing, mining, and heavy equipment, there is an increasing need for power electronics that can handle high loads, improve energy efficiency, and provide precise control over machinery. IGCTs are used in motor drives and industrial control systems to optimize performance and reduce energy consumption. As industries adopt more automated and electrified processes, the demand for high-power, efficient switching devices like IGCTs will continue to increase.
The rise of HVDC transmission systems is another major factor contributing to the growth of the IGCT market. HVDC technology is critical for transmitting large amounts of electricity over long distances, particularly from renewable energy sources located far from population centers. IGCTs are a key component in HVDC converters, where they manage the conversion of AC to DC and back to AC for efficient transmission and distribution. As more HVDC projects are developed worldwide to support renewable energy integration and grid expansion, the demand for IGCTs in these applications is expected to grow.
Regulatory pressure to reduce energy consumption and greenhouse gas emissions is also driving the market for IGCTs. Governments and regulatory bodies around the world are implementing stricter energy efficiency standards and encouraging the adoption of clean energy technologies. IGCTs, with their ability to improve the efficiency of power conversion and transmission systems, are well-positioned to help industries meet these regulatory requirements. In particular, industries that rely on high-power equipment, such as utilities, transportation, and manufacturing, are adopting IGCTs as part of their efforts to comply with energy efficiency regulations and reduce their environmental impact.
With the increasing focus on energy efficiency, the growth of renewable energy infrastructure, the electrification of transportation, and advancements in industrial automation, the IGCT market is poised for continued growth. As industries seek more reliable, efficient, and scalable power electronics solutions for high-power applications, IGCTs will play an increasingly important role in transforming the way energy is managed and transmitted across various sectors.
Global Integrated Gate-Commutated Thyristors (IGCT) Market - Key Trends and Drivers Summarized
Are Integrated Gate-Commutated Thyristors (IGCT) Transforming High-Power Applications in Industry and Energy?
Integrated Gate-Commutated Thyristors (IGCTs) are making waves in high-power electronics, but why are they so critical for industrial applications, energy transmission, and renewable energy systems? IGCTs are semiconductor devices that combine the advantages of thyristors (high power handling) and transistors (fast switching) into a single device. These devices are primarily used in high-voltage and high-current environments such as power grids, industrial drives, and traction systems, where they serve as efficient and reliable switches for managing large amounts of electrical energy.The significance of IGCTs lies in their ability to handle extremely high power with greater efficiency, faster switching times, and lower power losses compared to traditional semiconductor devices like Insulated-Gate Bipolar Transistors (IGBTs) or Gate Turn-Off Thyristors (GTOs). IGCTs are particularly valued in applications such as renewable energy systems, including wind turbines and solar power converters, where they contribute to converting and transmitting energy with minimal losses. With the increasing demand for energy-efficient solutions in high-power applications, IGCTs are emerging as a cornerstone technology in industries ranging from power generation and transmission to transportation and industrial automation.
How Have Technological Advancements Improved IGCTs for Power Efficiency and Reliability in High-Voltage Applications?
Technological advancements have significantly enhanced the performance and efficiency of Integrated Gate-Commutated Thyristors (IGCTs), making them indispensable in high-power applications. One of the most important advancements is in gate drive technology, which has made IGCTs much faster and more reliable. Modern IGCTs feature integrated gate units that enable very low turn-off times, which improves switching speed and reduces power losses. The gate drive design ensures that the thyristor behaves more like a transistor during switching, allowing for precise control and fast commutation. This advancement is particularly crucial in applications like motor drives and high-speed trains, where efficient and reliable switching is essential to maintaining system performance and energy efficiency.Another key development is the improvement in cooling systems and thermal management for IGCTs. Since these devices handle extremely high currents and voltages, they generate a significant amount of heat during operation. Advances in cooling technologies, such as direct liquid cooling and advanced heat sinks, have significantly improved the thermal performance of IGCTs. These solutions enable better heat dissipation, allowing IGCTs to operate at higher power levels without overheating. Improved thermal management extends the lifespan of IGCTs and enhances their reliability, which is especially important in industrial applications where downtime and equipment failure can be costly.
Advances in semiconductor material science have also played a critical role in enhancing the performance of IGCTs. The development of new silicon-based materials with higher breakdown voltages and improved electrical conductivity has enabled IGCTs to handle even higher voltages and currents. Additionally, researchers are exploring the potential of wide-bandgap materials, such as silicon carbide (SiC) and gallium nitride (GaN), which could further improve the efficiency and thermal stability of IGCTs in the future. These materials promise to enable IGCTs to operate at higher temperatures and frequencies, reducing energy losses and improving overall system efficiency.
A significant improvement in IGCTs is the reduction in conduction and switching losses, which has been achieved through optimized device design and manufacturing processes. Modern IGCTs exhibit lower on-state voltage drops, which reduces the power dissipated as heat during conduction. This improvement enhances the efficiency of power conversion systems, such as inverters and converters used in renewable energy applications like wind turbines and solar farms. Reducing conduction losses is critical for improving the overall energy efficiency of high-power systems, which is increasingly important as industries and governments seek to reduce carbon emissions and energy consumption.
Digital control systems and intelligent gate drives have also improved the performance and versatility of IGCTs. By integrating digital control into IGCT systems, engineers can monitor real-time operating conditions and adjust switching parameters for optimal performance. This allows IGCTs to operate more efficiently under varying load conditions and to adapt to changes in the electrical grid or industrial systems. Additionally, intelligent gate drives can provide real-time diagnostics and predictive maintenance information, helping operators identify potential failures before they occur and improving system reliability. In applications such as HVDC (high-voltage direct current) transmission and industrial drives, these features are invaluable for maintaining continuous operation and reducing downtime.
Another advancement in IGCT technology is the development of modular IGCT systems, which offer greater flexibility and scalability for different power levels and applications. Modular IGCT systems can be configured in parallel or series, allowing for higher voltage and current handling capabilities. This flexibility is crucial in power electronics systems like HVDC transmission, where power requirements can vary greatly depending on the distance and capacity of the transmission line. Modular IGCTs also simplify maintenance and replacement, as individual modules can be swapped out without affecting the overall system, improving operational efficiency in industrial and energy applications.
Improvements in packaging and design have also contributed to the increased reliability and performance of IGCTs. Modern IGCTs are designed with compact, rugged packaging that enhances their mechanical stability and resistance to environmental stressors like vibration, dust, and moisture. This makes IGCTs suitable for use in harsh environments such as heavy industry, mining, and marine applications. The compact design also allows for higher power density, meaning that more power can be managed in a smaller footprint, which is particularly important in space-constrained applications like rail transportation and offshore energy systems.
In the field of renewable energy, IGCTs have benefitted from advancements in power grid integration and energy storage systems. The role of IGCTs in converting and managing the fluctuating power generated by renewable sources like wind and solar is critical for maintaining grid stability. By improving the efficiency and responsiveness of IGCTs, these systems can handle the variable output of renewable energy sources more effectively, ensuring that power is transmitted and distributed efficiently. In addition, IGCTs are increasingly being used in energy storage systems, where they help manage the charging and discharging of large-scale battery systems, further enhancing the stability and reliability of modern power grids.
Why Are IGCTs Critical for High-Power Applications in Energy Transmission, Industrial Automation, and Transportation?
IGCTs are critical for high-power applications in energy transmission, industrial automation, and transportation because of their ability to handle extreme voltages and currents with high efficiency and reliability. In energy transmission, particularly in high-voltage direct current (HVDC) systems, IGCTs play a crucial role in converting alternating current (AC) to direct current (DC) and vice versa. HVDC is essential for transmitting large amounts of electricity over long distances with minimal losses, and IGCTs are ideal for managing the high-power requirements of these systems. Their fast switching speeds, combined with low conduction and switching losses, ensure that energy is transmitted efficiently across vast distances, reducing power losses and improving grid stability.In industrial automation, IGCTs are indispensable for controlling high-power motors and drives used in manufacturing, mining, and heavy industries. These industries rely on motors and drives to power machinery that requires precise control of speed and torque, often under challenging conditions involving high loads and variable demands. IGCTs are capable of providing the necessary switching speeds and power management required for these high-torque applications, while also ensuring energy efficiency. In industries where power consumption is a significant cost factor, the ability of IGCTs to reduce energy losses during operation directly contributes to cost savings and operational efficiency.
IGCTs are also essential in the transportation sector, particularly in rail and electric vehicle (EV) applications. In high-speed trains and electric locomotives, IGCTs are used in traction converters to control the flow of electrical power to the train's motors. These traction systems require high-power semiconductors that can operate reliably under heavy loads and variable conditions, and IGCTs provide the performance and durability needed to ensure smooth, efficient operation. The high switching speeds of IGCTs help improve energy efficiency, reducing the overall power consumption of rail networks, which is particularly important in countries with extensive electric rail systems.
In electric vehicle (EV) infrastructure, IGCTs are used in high-power charging stations, where they manage the conversion of grid power to the appropriate voltage and current levels needed to charge EV batteries quickly and safely. The ability of IGCTs to handle high power densities and switch quickly ensures that EV charging stations can deliver fast charging times without overloading the electrical grid. As the adoption of EVs continues to grow, the need for efficient power conversion and management in charging infrastructure is becoming increasingly important, and IGCTs are expected to play a key role in supporting the expansion of this critical infrastructure.
In renewable energy applications, IGCTs are crucial for managing the conversion and distribution of power generated by wind, solar, and hydroelectric systems. These energy sources produce variable power output depending on environmental conditions, and IGCTs are used in power converters and inverters to stabilize this power before it is transmitted to the grid. Their ability to switch rapidly and handle high voltages makes them ideal for smoothing out fluctuations in renewable energy output, ensuring that power is efficiently integrated into the grid. As the world transitions to more sustainable energy sources, IGCTs will be essential in optimizing the performance and reliability of renewable energy systems.
IGCTs are also critical for marine and offshore applications, where power systems must be highly reliable and capable of withstanding harsh environmental conditions. In offshore oil platforms, ships, and submarines, IGCTs are used in power conversion systems to manage the flow of electricity between various on-board systems. These environments require power electronics that can handle high voltages, operate reliably in corrosive conditions, and manage power distribution efficiently. IGCTs, with their rugged design and high efficiency, are well-suited for these demanding applications, ensuring that power systems remain operational even in extreme conditions.
The flexibility and scalability of IGCTs make them suitable for a wide range of applications, from large industrial systems to renewable energy installations and transportation networks. Their ability to manage high power with minimal losses, combined with their reliability and fast switching capabilities, makes them indispensable for industries where energy efficiency, performance, and durability are critical.
What Factors Are Driving the Growth of the IGCT Market?
Several factors are driving the rapid growth of the Integrated Gate-Commutated Thyristor (IGCT) market, including the increasing demand for energy-efficient power management solutions, the expansion of renewable energy systems, the growth of electrified transportation, and advancements in industrial automation. One of the primary drivers is the global push for energy efficiency. As industries seek to reduce their energy consumption and carbon footprints, there is a growing demand for power electronics that can operate efficiently at high power levels. IGCTs, with their low conduction and switching losses, offer significant energy savings in applications like power transmission, industrial motors, and renewable energy systems.The expansion of renewable energy infrastructure is another key factor driving the growth of the IGCT market. With governments and industries investing heavily in wind, solar, and hydroelectric power, there is a growing need for high-power semiconductor devices that can efficiently manage the conversion and distribution of renewable energy. IGCTs are ideally suited for these applications due to their ability to handle variable power output and integrate renewable energy into the grid with minimal losses. As countries continue to increase their renewable energy capacity, the demand for IGCTs is expected to rise in parallel.
The electrification of transportation, particularly in rail systems and electric vehicles, is also contributing to the growth of the IGCT market. High-speed trains, electric locomotives, and electric vehicles require advanced power electronics to manage energy efficiently and ensure reliable operation. IGCTs, with their ability to handle high currents and voltages while maintaining fast switching speeds, are crucial for the performance and efficiency of traction systems and charging infrastructure. As more countries invest in electrified transportation networks and EV infrastructure, the demand for IGCTs in these sectors is expected to grow significantly.
Advancements in industrial automation and the growing trend toward smart manufacturing are also driving the adoption of IGCTs. In industries such as manufacturing, mining, and heavy equipment, there is an increasing need for power electronics that can handle high loads, improve energy efficiency, and provide precise control over machinery. IGCTs are used in motor drives and industrial control systems to optimize performance and reduce energy consumption. As industries adopt more automated and electrified processes, the demand for high-power, efficient switching devices like IGCTs will continue to increase.
The rise of HVDC transmission systems is another major factor contributing to the growth of the IGCT market. HVDC technology is critical for transmitting large amounts of electricity over long distances, particularly from renewable energy sources located far from population centers. IGCTs are a key component in HVDC converters, where they manage the conversion of AC to DC and back to AC for efficient transmission and distribution. As more HVDC projects are developed worldwide to support renewable energy integration and grid expansion, the demand for IGCTs in these applications is expected to grow.
Regulatory pressure to reduce energy consumption and greenhouse gas emissions is also driving the market for IGCTs. Governments and regulatory bodies around the world are implementing stricter energy efficiency standards and encouraging the adoption of clean energy technologies. IGCTs, with their ability to improve the efficiency of power conversion and transmission systems, are well-positioned to help industries meet these regulatory requirements. In particular, industries that rely on high-power equipment, such as utilities, transportation, and manufacturing, are adopting IGCTs as part of their efforts to comply with energy efficiency regulations and reduce their environmental impact.
With the increasing focus on energy efficiency, the growth of renewable energy infrastructure, the electrification of transportation, and advancements in industrial automation, the IGCT market is poised for continued growth. As industries seek more reliable, efficient, and scalable power electronics solutions for high-power applications, IGCTs will play an increasingly important role in transforming the way energy is managed and transmitted across various sectors.
Key Insights:
- Market Growth: Understand the significant growth trajectory of the Integrated Gate-Commutated Thyristors (IGCT) Drives segment, which is expected to reach US$10.7 Million by 2030 with a CAGR of a 5.1%. The Integrated Gate-Commutated Thyristors (IGCT) Tractions segment is also set to grow at 5.7% CAGR over the analysis period.
- Regional Analysis: Gain insights into the U.S. market, estimated at $5.4 Million in 2023, and China, forecasted to grow at an impressive 5.3% CAGR to reach $4.6 Million by 2030. Discover growth trends in other key regions, including Japan, Canada, Germany, and the Asia-Pacific.
Report Features:
- Comprehensive Market Data: Independent analysis of annual sales and market forecasts in US$ Million from 2023 to 2030.
- In-Depth Regional Analysis: Detailed insights into key markets, including the U.S., China, Japan, Canada, Europe, Asia-Pacific, Latin America, Middle East, and Africa.
- Company Profiles: Coverage of major players such as ABB Ltd., ASC Capacitors, Central Semiconductor Corporation, and more.
- Complimentary Updates: Receive free report updates for one year to keep you informed of the latest market developments.
Key Questions Answered:
- How is the Global Integrated Gate-Commutated Thyristors (IGCT) Market expected to evolve by 2030?
- What are the main drivers and restraints affecting the market?
- Which market segments will grow the most over the forecast period?
- How will market shares for different regions and segments change by 2030?
- Who are the leading players in the market, and what are their prospects?
Why You Should Buy This Report:
- Detailed Market Analysis: Access a thorough analysis of the Global Integrated Gate-Commutated Thyristors (IGCT) Market, covering all major geographic regions and market segments.
- Competitive Insights: Get an overview of the competitive landscape, including the market presence of major players across different geographies.
- Future Trends and Drivers: Understand the key trends and drivers shaping the future of the Global Integrated Gate-Commutated Thyristors (IGCT) Market.
- Actionable Insights: Benefit from actionable insights that can help you identify new revenue opportunities and make strategic business decisions.
Select Competitors (Total 42 Featured):
- ABB Ltd.
- ASC Capacitors
- Central Semiconductor Corporation
- Dynex Semiconductor Ltd.
- Hitachi Energy Ltd.
- Infineon Technologies AG
- Mitsubishi Electric Corporation
- ON Semiconductor Corp.
- Sun King Technology Group Ltd.
- Tianjin Century Electronics Co.,Ltd.
Table of Contents
I. METHODOLOGYII. EXECUTIVE SUMMARY2. FOCUS ON SELECT PLAYERSIII. MARKET ANALYSISIV. COMPETITION
1. MARKET OVERVIEW
3. MARKET TRENDS & DRIVERS
4. GLOBAL MARKET PERSPECTIVE
UNITED STATES
CANADA
JAPAN
CHINA
EUROPE
FRANCE
GERMANY
ITALY
UNITED KINGDOM
REST OF EUROPE
ASIA-PACIFIC
REST OF WORLD
Companies Mentioned
- ABB Ltd.
- ASC Capacitors
- Central Semiconductor Corporation
- Dynex Semiconductor Ltd.
- Hitachi Energy Ltd.
- Infineon Technologies AG
- Mitsubishi Electric Corporation
- ON Semiconductor Corp.
- Sun King Technology Group Ltd.
- Tianjin Century Electronics Co.,Ltd.
Table Information
| Report Attribute | Details |
|---|---|
| No. of Pages | 223 |
| Published | December 2024 |
| Forecast Period | 2023 - 2030 |
| Estimated Market Value ( USD | $ 19.9 Million |
| Forecasted Market Value ( USD | $ 29 Million |
| Compound Annual Growth Rate | 5.5% |
| Regions Covered | Global |
| No. of Companies Mentioned | 10 |
