This proceedings contains a collection of 24 papers from The American Ceramic Society’s 41st International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 22-27, 2017. This issue includes papers presented in the following symposia:
- Symposium 3 14th International Symposium on Solid Oxide Fuel Cells (SOFC)
- Symposium 8 11th International Symposium on Advanced Processing & Manufacturing Technologies for Structural & Multifunctional Materials and Systems
- Symposium 11 Advanced Materials and Innovative Processing ideas for the Production Root Technology
- Symposium 12 Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases)
- Symposium 13 Advanced Materials for Sustainable Nuclear Fission and Fusion Energy
- Symposium 14 Crystalline Materials for Electrical, Optical and Medical Applications
- Symposium 15 Additive Manufacturing and 3D Printing Technologies
- Focused Session 1 Geopolymers, Chemically Bonded Ceramics, Eco-friendly and Sustainable Materials
Table of Contents
Introduction ix
SOLID OXIDE FUEL CELLS
Mitigation of Compressor Stall/Surge in a Hybrid Solid Oxide Fuel Cell-Gas Turbine System 3
M. Azizi and J. Brouwer
Characteristics of Protective Spinel Manganese Cobaltite Coatings Produced by APS for Cr-Contained SOFC Interconnects 7
Chun-Liang Chang, Chang-sing Hwang, Chun-Huang Tsai, Sheng-Fu Yang, Te-Jung Huang, Ming-Hsiu Wu, and Cheng-Yun Fu
Influence of Temperature and Steam Content on Degradation of Metallic Interconnects in Reducing Atmosphere 17
Christoph Folgner, Viktar Sauchuk, Mihails Kusnezoff, and Alexander Michaelis
Fabrication of the Anode-Supported Solid Oxide Fuel Cell with Direct Pore Channel in the Cermet Structure to Improve the Electrochemical Performance 35
Ming-Wei Liao, Tai-Nan Lin, Hong-Yi Kuo, Chun-Yen Yeh, Yu-Ming Chen, Wei-Xin Kao, Jing-Kai Lin, and Ruey-Yi Lee
Critical Evaluation of Dynamic Reversible Chemical Energy Storage with High Temperature Electrolysis 47
D. McVay, J. Brouwer, and F. Ghigliazza
Estimation of Polarization Loss Due to Chromium Poisoning of LSM-Based Cathodes in Solid Oxide Fuel Cells 59
R. Wang, B. Mo, M. Würth, U. B. Pal, S. Gopalan, and S. N. Basu
ADVANCED PROCESSING AND MANUFACTURING TECHNOLOGIES
Synthesis and Tribological Behavior of Bi-Cr2AlC Composites 69
F. AlAnazi, S. Ghosh, R. Dunnigan, and S. Gupta
Finite Element Analysis of Self-Propagating High-Temperature Synthesis (SHS) of Silicon Nitride 75
Venkata V. K. Doddapaneni, Julia Lin, Ayako Hiranaka, Tomohiro Akiyama, and Sidney Lin
TEM Analysis of Diffusion-Bonded Silicon Carbide Ceramics Joined using Metallic Interlayers 87
T. Ozaki, Y. Hasegawa, H. Tsuda, S. Mori, M. C. Halbig, R. Asthana, and M. Singh
Numerical Analysis of Inhomogeneous Behavior in Friction Stir Processing by Using a New Coupled 95
Method of MPS and FEM
Hisashi Serizawa and Fumikazu Miyasaka
Study of Shielding Method to Reduce Leakage Magnetic Fields of an Opening in a Magnetically Shielded Room 105
H. Sugiyama and K. Kamata
Low-Temperature Synthesis of Hafnium Diboride Powder Via Magnesiothermic Reduction in Molten Salt 119
Ke Bao, Joseph Massey, Juntong Huang, and Shaowei Zhang
Tribology Study of Novel Ti3SiC2 Matrix Composites Reinforced with Ceramics (Al2O3, BN, B4C) Particulates 131
J. Nelson, M. Olson, and S. Gupta
Interfacial Reaction and Mechanical Properties of SiC Bonded with Zircaloy-4 using Ni, Zr /Al Double Interlayers 143
Xin Geng, Guangwu Wen, and Xiaoxiao Huang
SINGLE CRYSTALLINE MATERIALS FOR ELECTRICAL, OPTICAL, AND MEDICAL APPLICATIONS
Characterization Approaches of Femtosecond Direct Laser Writing (DLW) Modifications inside Cubic YAG Crystals 157
W. Gebremichael, I. Manek-Hönninger, S. Rouzet, M. Chamoun, A. Fargues, V. Jubera, T. Cardinal, Y. Petit, and L. Canioni
ADDITIVE MANUFACTURING AND 3D PRINTING TECHNOLOGIES
Comparison of Dynamic Mask- and Vector-Based Ceramic Stereolithography 165
S. Baumgartner, M. Pfaffinger, B. Busetti, and J. Stampfl
Additive Manufacturing (3D Printing) of Ceramics: Microstructure, Properties, and Product Examples 175
P. Karandikar, M. Watkins, A. McCormick, B. Givens, and M. Aghajanian
GEOPOLYMERS, CHEMICALLY BONDED CERAMICS, ECO-FRIENDLY, AND SUSTAINABLE MATERIALS
Impact of Various Aluminosilicate Compounds in Geopolymer Foam Formation to a Si/M=0.7 of Silicate Solution 191
M. Arnoult, M. Perronnet, A. Autef, G. Gasgnier, and S. Rossignol
Geopolymers Based on Natural and Synthetic Metakaolin: A 201
Critical Review
Joseph Davidovits
On the Durability Behavior of Natural Fiber Reinforced 215
Geopolymers
A. C. C. Trindade, F. A. Silva, H. A. Alcamand, and P. H. R. Borges
Performance and Durability of Fe-Rich Inorganic Polymer Composites with Basalt Fibers 229
A. Peys, M. Peeters, A. Katsiki, L. Kriskova, H. Rahier, and Y. Pontikes
Wetting Angle: New Parameter Indicating the Reactivity of Alkaline Solutions and Geopolymer Binders 239
Ameni Gharzouni, Laeticia Vidal, Robin Stocky, Julie Peyne, and Sylvie Rossignol
Effect of TiO2 and ZnO Nanopowders on Metakaolin-Sodium 251
Hydroxide Geopolymers
D. Sarbapalli and P. Mondal
Eco-Friendly Geopolymer Composite for Winter Season Pavement Pothole Patching 263
M. Sarkkinen, K. Kujala, and S. Gehör
