The Latin America, Middle East and Africa Industrial Burner Market is expected to witness market growth of 9.0% CAGR during the forecast period (2022-2028).
Compared to a conventional pipe-style burner, a ribbon burner is more durable, quieter, and more efficient. There is no steel in the forge, thus there is no scaling or deterioration of the burner parts. The forge which has two of these burners has a volume of around 7,000 cubic inches. The ribbon burner measures 12 14" long, 3" broad, and 4 12" deep. Steel tubing measuring 3" x 3" and 3/16" thick makes up the plenum. The refractory is punctured 32 times, and the inlet measures 1 9/16" on the inside and 1 7/8" on the outside.
The refractory has a temperature rating of above 3,000 degrees. These burners have been operating for years with no obvious evidence of wear or damage. Before their widespread use in cogeneration and combined cycle systems, linear and in-duct burners were utilized for many years to heat air in drying operations. Some of the first systems fired into a recirculating processing airstream after premixing fuel and air in a frequently complex setup.
Early in the 1960s, it was used for the first time in high-temperature, low-oxygen streams downstream of gas turbines to supply extra steam for industrial processes and electrical peaking plants running steam turbines. The amount of supplemental heat input from duct burners has increased in tandem with the size and efficiency of gas turbines.
The UAE produces 3 million gallons of oil and other liquids daily on average, and its oil reserves total 100 billion barrels. The production of oil and gas, which makes up approximately 13% of all exports and accounts for around 30% of the nation's GDP, is the primary driver of the export sector. The majority of the UAE government's income comes from royalties and oil industry earnings. The traditional oil and gas extraction industry is being developed by the United Arab Emirates.
In 2020, the UAE claimed to have found more than 80 trillion cubic feet of gas reserves at Jebel Ali. By 2030, the government wants to be self-sufficient in gas, however, it now imports gas through the Dolphin pipeline from Qatar. For the production of oil and gases, an industrial burner plays a crucial for the production of the oil which accelerates the adoption of industrial burners.
The Brazil market dominated the LAMEA Industrial Burner Market by Country in 2021, and is expected to continue to be a dominant market till 2028; thereby, achieving a market value of $168.7 million by 2028. The Argentina market is obtained to grow a CAGR of 9.6% during (2022 - 2028). Additionally, The UAE market is experiencing a CAGR of 8.7% during (2022 - 2028).
Based on Operating Temperature, the market is segmented into High Temperature (> 1,400°F) and Low Temperature (< 1,400°F). Based on Vertical, the market is segmented into Chemicals, Petrochemicals, Automotive, Power Generation, Metals & Mining, Food & Beverages, and Others. Based on Burner Type, the market is segmented into Radiant Burner, Direct-fired Burner, Regenerative Burner, High Thermal Release Burner, and Self-recuperative Burner & Others. Based on Fuel Type, the market is segmented into Oil, Dual Fuel, Gas, and Solid Fuel. Based on Power Rating, the market is segmented into Monoblock and Duoblock. Based on countries, the market is segmented into Brazil, Argentina, UAE, Saudi Arabia, South Africa, Nigeria, and Rest of LAMEA.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Andritz AG, NIBE Industrier AB, Corp., Honeywell International, Inc., Ariston Holding N.V., Max Weishaupt GmbH, Selas Heat Technology Company, LLC. Riello S.P.A. (Raytheon Technologies Corporation), Fives Group (Novafives S.A.S.), Oilon Group Oy and Ebico Trading Ltd.
Compared to a conventional pipe-style burner, a ribbon burner is more durable, quieter, and more efficient. There is no steel in the forge, thus there is no scaling or deterioration of the burner parts. The forge which has two of these burners has a volume of around 7,000 cubic inches. The ribbon burner measures 12 14" long, 3" broad, and 4 12" deep. Steel tubing measuring 3" x 3" and 3/16" thick makes up the plenum. The refractory is punctured 32 times, and the inlet measures 1 9/16" on the inside and 1 7/8" on the outside.
The refractory has a temperature rating of above 3,000 degrees. These burners have been operating for years with no obvious evidence of wear or damage. Before their widespread use in cogeneration and combined cycle systems, linear and in-duct burners were utilized for many years to heat air in drying operations. Some of the first systems fired into a recirculating processing airstream after premixing fuel and air in a frequently complex setup.
Early in the 1960s, it was used for the first time in high-temperature, low-oxygen streams downstream of gas turbines to supply extra steam for industrial processes and electrical peaking plants running steam turbines. The amount of supplemental heat input from duct burners has increased in tandem with the size and efficiency of gas turbines.
The UAE produces 3 million gallons of oil and other liquids daily on average, and its oil reserves total 100 billion barrels. The production of oil and gas, which makes up approximately 13% of all exports and accounts for around 30% of the nation's GDP, is the primary driver of the export sector. The majority of the UAE government's income comes from royalties and oil industry earnings. The traditional oil and gas extraction industry is being developed by the United Arab Emirates.
In 2020, the UAE claimed to have found more than 80 trillion cubic feet of gas reserves at Jebel Ali. By 2030, the government wants to be self-sufficient in gas, however, it now imports gas through the Dolphin pipeline from Qatar. For the production of oil and gases, an industrial burner plays a crucial for the production of the oil which accelerates the adoption of industrial burners.
The Brazil market dominated the LAMEA Industrial Burner Market by Country in 2021, and is expected to continue to be a dominant market till 2028; thereby, achieving a market value of $168.7 million by 2028. The Argentina market is obtained to grow a CAGR of 9.6% during (2022 - 2028). Additionally, The UAE market is experiencing a CAGR of 8.7% during (2022 - 2028).
Based on Operating Temperature, the market is segmented into High Temperature (> 1,400°F) and Low Temperature (< 1,400°F). Based on Vertical, the market is segmented into Chemicals, Petrochemicals, Automotive, Power Generation, Metals & Mining, Food & Beverages, and Others. Based on Burner Type, the market is segmented into Radiant Burner, Direct-fired Burner, Regenerative Burner, High Thermal Release Burner, and Self-recuperative Burner & Others. Based on Fuel Type, the market is segmented into Oil, Dual Fuel, Gas, and Solid Fuel. Based on Power Rating, the market is segmented into Monoblock and Duoblock. Based on countries, the market is segmented into Brazil, Argentina, UAE, Saudi Arabia, South Africa, Nigeria, and Rest of LAMEA.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Andritz AG, NIBE Industrier AB, Corp., Honeywell International, Inc., Ariston Holding N.V., Max Weishaupt GmbH, Selas Heat Technology Company, LLC. Riello S.P.A. (Raytheon Technologies Corporation), Fives Group (Novafives S.A.S.), Oilon Group Oy and Ebico Trading Ltd.
Scope of the Study
Market Segments Covered in the Report:
By Operating Temperature- High Temperature (> 1,400°F)
- Low Temperature (< 1,400°F)
- Chemicals
- Petrochemicals
- Automotive
- Power Generation
- Metals & Mining
- Food & Beverages
- Others
- Radiant Burner
- Direct-fired Burner
- Regenerative Burner
- High Thermal Release Burner
- Self-recuperative Burner & Others
- Oil
- Dual Fuel
- Gas
- Solid Fuel
- Monoblock
- Duoblock
- Brazil
- Argentina
- UAE
- Saudi Arabia
- South Africa
- Nigeria
- Rest of LAMEA
Key Market Players
List of Companies Profiled in the Report:
- Andritz AG
- NIBE Industrier AB, Corp.
- Honeywell International, Inc.
- Ariston Holding N.V.
- Max Weishaupt GmbH
- Selas Heat Technology Company, LLC
- Riello S.P.A. (Raytheon Technologies Corporation)
- Fives Group (Novafives S.A.S.)
- Oilon Group Oy
- Ebico Trading Ltd.
Unique Offerings from the Publisher
- Exhaustive coverage
- The highest number of Market tables and figures
- Subscription-based model available
- Guaranteed best price
- Assured post sales research support with 10% customization free
Table of Contents
Chapter 1. Market Scope & Methodology
Chapter 2. Market Overview
Chapter 3. LAMEA Industrial Burner Market by Operating Temperature
Chapter 4. LAMEA Industrial Burner Market by Vertical
Chapter 5. LAMEA Industrial Burner Market by Burner Type
Chapter 6. LAMEA Industrial Burner Market by Fuel Type
Chapter 7. LAMEA Industrial Burner Market by Power Rating
Chapter 8. LAMEA Industrial Burner Market by Country
Chapter 9. Company Profiles
Companies Mentioned
- Andritz AG
- NIBE Industrier AB, Corp.
- Honeywell International, Inc.
- Ariston Holding N.V.
- Max Weishaupt GmbH
- Selas Heat Technology Company, LLC
- Riello S.P.A. (Raytheon Technologies Corporation)
- Fives Group (Novafives S.A.S.)
- Oilon Group Oy
- Ebico Trading Ltd.
Methodology
LOADING...
