The Latin America, Middle East and Africa Pressure Washer Market would witness market growth of 10.0% CAGR during the forecast period (2022-2028).
The majority of smaller pressure washers are powered by household electricity, although larger units use tiny gasoline engines. The engines are comparable to those in lawnmowers. When working outside or in remote locations without access to electricity, gas engine types are ideal. The water pump is intended to be powered by a motor or engine. The electric motor or gas motor gives a pressure washer its power. It resembles a manual ground-water pump in some ways, except that it works at faster speeds. Water from the faucet is sucked in when the motor pulls the pump in one direction; when it pushes the pump in the opposite direction, water shoots out in a high-pressure jet. An average water flow through a pump is 4 to 8 liters (1-2 gallons) per minute.
The high-pressure hose is a tube that exits the washer and connects to a cleaning tool. The immense pressure of water running through an ordinary piece of tubing would destroy it. Wire mesh reinforcement and layers of highly dense plastic are used to create a high-pressure hose. It's crucial to use a hose with a higher pressure specification than the pump in the pressure washer.
The Brazilian government adopted a new sanitation bill in 2020 with the goal of privatizing the country's potable water supply and hygiene industry. After the adoption of this bill, numerous local businesses and industries have appeared throughout the country to offer cleaning and sanitization services for different industries. Additionally, these businesses provide inexpensive cleaning services for both home and commercial areas. Because of LAMEA’s moderate population growth and increased investment by major regional rivals and rising awareness of the importance of keeping good cleanliness in the home, the pressure washers market would be a thriving industry here.
The Brazil market dominated the LAMEA Pressure Washer Market by Country in 2021, and would continue to be a dominant market till 2028; thereby, achieving a market value of $76.9 million by 2028. The Argentina market is showcasing a CAGR of 10.6% during (2022-2028). Additionally, The UAE market would grow at a CAGR of 9.7% during (2022-2028).
Based on Type, the market is segmented into Portable and Non-Portable. Based on Power Source, the market is segmented into Electric, Gas, and Battery. Based on PSI Pressure, the market is segmented into 3,001 - 4,000 PSI, 1,501 - 3,000 PSI, 0 - 1,500 PSI, and Above 4,000 PSI. Based on Application, the market is segmented into Commercial, Residential/DIY, and Industrial. Based on Water Operation, the market is segmented into Hot Water and Cold Water. Based on Distribution Channel, the market is segmented into Offline and Online. Based on countries, the market is segmented into Brazil, Argentina, UAE, Saudi Arabia, South Africa, Nigeria, and Rest of LAMEA.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Tennant Company, Generac Holdings, Inc., Nilfisk Holding A/S, Techtronic Industries Co., Ltd., Stanley Black & Decker, Inc., Briggs & Stratton, LLC (KPS Capital Partners), Alfred Karcher SE & Co. KG, Annovi Reverberi Spa, Mi-T-M Corporation, and FNA Group.
The majority of smaller pressure washers are powered by household electricity, although larger units use tiny gasoline engines. The engines are comparable to those in lawnmowers. When working outside or in remote locations without access to electricity, gas engine types are ideal. The water pump is intended to be powered by a motor or engine. The electric motor or gas motor gives a pressure washer its power. It resembles a manual ground-water pump in some ways, except that it works at faster speeds. Water from the faucet is sucked in when the motor pulls the pump in one direction; when it pushes the pump in the opposite direction, water shoots out in a high-pressure jet. An average water flow through a pump is 4 to 8 liters (1-2 gallons) per minute.
The high-pressure hose is a tube that exits the washer and connects to a cleaning tool. The immense pressure of water running through an ordinary piece of tubing would destroy it. Wire mesh reinforcement and layers of highly dense plastic are used to create a high-pressure hose. It's crucial to use a hose with a higher pressure specification than the pump in the pressure washer.
The Brazilian government adopted a new sanitation bill in 2020 with the goal of privatizing the country's potable water supply and hygiene industry. After the adoption of this bill, numerous local businesses and industries have appeared throughout the country to offer cleaning and sanitization services for different industries. Additionally, these businesses provide inexpensive cleaning services for both home and commercial areas. Because of LAMEA’s moderate population growth and increased investment by major regional rivals and rising awareness of the importance of keeping good cleanliness in the home, the pressure washers market would be a thriving industry here.
The Brazil market dominated the LAMEA Pressure Washer Market by Country in 2021, and would continue to be a dominant market till 2028; thereby, achieving a market value of $76.9 million by 2028. The Argentina market is showcasing a CAGR of 10.6% during (2022-2028). Additionally, The UAE market would grow at a CAGR of 9.7% during (2022-2028).
Based on Type, the market is segmented into Portable and Non-Portable. Based on Power Source, the market is segmented into Electric, Gas, and Battery. Based on PSI Pressure, the market is segmented into 3,001 - 4,000 PSI, 1,501 - 3,000 PSI, 0 - 1,500 PSI, and Above 4,000 PSI. Based on Application, the market is segmented into Commercial, Residential/DIY, and Industrial. Based on Water Operation, the market is segmented into Hot Water and Cold Water. Based on Distribution Channel, the market is segmented into Offline and Online. Based on countries, the market is segmented into Brazil, Argentina, UAE, Saudi Arabia, South Africa, Nigeria, and Rest of LAMEA.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Tennant Company, Generac Holdings, Inc., Nilfisk Holding A/S, Techtronic Industries Co., Ltd., Stanley Black & Decker, Inc., Briggs & Stratton, LLC (KPS Capital Partners), Alfred Karcher SE & Co. KG, Annovi Reverberi Spa, Mi-T-M Corporation, and FNA Group.
Scope of the Study
Market Segments Covered in the Report:
By Type
- Portable
- Non-Portable
By Power Source
- Electric
- Gas
- Battery
By PSI Pressure
- 3,001 - 4,000 PSI
- 1,501 - 3,000 PSI
- 0 - 1,500 PSI
- Above 4,000 PSI
By Application
- Commercial
- Residential/DIY
- Industrial
By Water Operation
- Hot Water
- Cold Water
By Distribution Channel
- Offline
- Online
By Country
- Brazil
- Argentina
- UAE
- Saudi Arabia
- South Africa
- Nigeria
- Rest of LAMEA
Key Market Players
List of Companies Profiled in the Report:
- Tennant Company
- Generac Holdings, Inc.
- Nilfisk Holding A/S
- Techtronic Industries Co., Ltd.
- Stanley Black & Decker, Inc.
- Briggs & Stratton, LLC (KPS Capital Partners)
- Alfred Karcher SE & Co. KG
- Annovi Reverberi Spa
- Mi-T-M Corporation
- FNA Group
Unique Offerings from the Publisher
- Exhaustive coverage
- The highest number of Market tables and figures
- Subscription-based model available
- Guaranteed best price
- Assured post sales research support with 10% customization free
Table of Contents
Chapter 1. Market Scope & Methodology
Chapter 2. Market Overview
Chapter 4. LAMEA Pressure Washer Market by Type
Chapter 5. LAMEA Pressure Washer Market by Power Source
Chapter 6. LAMEA Pressure Washer Market by PSI Pressure
Chapter 7. LAMEA Pressure Washer Market by Application
Chapter 8. LAMEA Pressure Washer Market by Water Operation
Chapter 9. LAMEA Pressure Washer Market by Distribution Channel
Chapter 10. LAMEA Pressure Washer Market by Country
Chapter 11. Company Profiles
Companies Mentioned
- Tennant Company
- Generac Holdings, Inc.
- Nilfisk Holding A/S
- Techtronic Industries Co., Ltd.
- Stanley Black & Decker, Inc.
- Briggs & Stratton, LLC (KPS Capital Partners)
- Alfred Karcher SE & Co. KG
- Annovi Reverberi Spa
- Mi-T-M Corporation
- FNA Group
Methodology
LOADING...