The Asia Pacific High Pressure Grinding Roller (HPGR) Market should witness market growth of 6.5% CAGR during the forecast period (2022-2028).
The hydraulic system, frame, high pressure working roller, and feeding system make up the majority of the high-pressure grinding roll. The operating components of the high-pressure grinding roll consist of a pair of parallel, counter-rotating high-pressure rollers. Each roller is operated by a motor via a planetary gear reduction, in which the location of the fixed roller is constant and the position of the moving roller on the horizontal slide is variable.
The hydraulic system on the shaft of the sliding roller supplies the working roller surface with extraordinarily high working pressure (up to 300mpa). High pressure ore grinding with High pressure Grinding Roller Presses (HPGRs) is accomplished mostly by compression. The process occurs between two counterrotating rollers, with the ore being choke-fed between them. The bulk density of the feed material is crushed to 70-85 percent of its actual density, while the individual particles are subjected to extremely high pressure.
Comminution occurs in the compacted material bed as opposed to by direct roller contact. In comparison to conventional grinding technologies, such as a ball or SAG mills, this decreases the wear on the grinding tools. In contrast to ball mills, all of the material travels through the relatively tiny but intense grinding zone between the two rollers, leaving no crushing volume wasted.
India is well recognized as a mineral and metal-rich country. India is the fourth-largest mineral producer after China, the United States, and Russia. In contrast, India ranks sixth in terms of the value of its mineral production. The mining sector contributes significantly to India's total GDP. India also generates 88 unique minerals, comprising four fuel minerals, ten metallic minerals, 47 non-metallic minerals, three atomic minerals, and 24 minor minerals.
The China market dominated the Asia Pacific High Pressure Grinding Roller (HPGR) Market by Country in 2021; thereby, achieving a market value of $61.7 million by 2028. The Japan market is registering a CAGR of 5.9% during (2022-2028). Additionally, The India market would showcase a CAGR of 7.1% during (2022-2028).
Based on Type, the market is segmented into Non-Ferrous Material Processing and Ferrous Material Processing. Based on End-user, the market is segmented into Ore & Mineral Processing and Cement. Based on Application, the market is segmented into Diamond Liberation, Pellet Feed Preparation, Precious Metal Beneficiation, and Base Metal Liberation. Based on countries, the market is segmented into China, Japan, India, South Korea, Singapore, Malaysia, and Rest of Asia Pacific.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include ABB Group, SGS S.A., Thyssenkrupp AG (Polysius AG), FLSmidth & Co. A/S, Metso Outotec Corporation, Citic Heavy Industries Co Ltd (CITIC Limited), AGICO, s.r.o., Shanghai Zenith Minerals Co., Ltd, KHD Humboldt Wedag International AG and Maschinenfabrik Köppern GmbH & Co. KG
The hydraulic system, frame, high pressure working roller, and feeding system make up the majority of the high-pressure grinding roll. The operating components of the high-pressure grinding roll consist of a pair of parallel, counter-rotating high-pressure rollers. Each roller is operated by a motor via a planetary gear reduction, in which the location of the fixed roller is constant and the position of the moving roller on the horizontal slide is variable.
The hydraulic system on the shaft of the sliding roller supplies the working roller surface with extraordinarily high working pressure (up to 300mpa). High pressure ore grinding with High pressure Grinding Roller Presses (HPGRs) is accomplished mostly by compression. The process occurs between two counterrotating rollers, with the ore being choke-fed between them. The bulk density of the feed material is crushed to 70-85 percent of its actual density, while the individual particles are subjected to extremely high pressure.
Comminution occurs in the compacted material bed as opposed to by direct roller contact. In comparison to conventional grinding technologies, such as a ball or SAG mills, this decreases the wear on the grinding tools. In contrast to ball mills, all of the material travels through the relatively tiny but intense grinding zone between the two rollers, leaving no crushing volume wasted.
India is well recognized as a mineral and metal-rich country. India is the fourth-largest mineral producer after China, the United States, and Russia. In contrast, India ranks sixth in terms of the value of its mineral production. The mining sector contributes significantly to India's total GDP. India also generates 88 unique minerals, comprising four fuel minerals, ten metallic minerals, 47 non-metallic minerals, three atomic minerals, and 24 minor minerals.
The China market dominated the Asia Pacific High Pressure Grinding Roller (HPGR) Market by Country in 2021; thereby, achieving a market value of $61.7 million by 2028. The Japan market is registering a CAGR of 5.9% during (2022-2028). Additionally, The India market would showcase a CAGR of 7.1% during (2022-2028).
Based on Type, the market is segmented into Non-Ferrous Material Processing and Ferrous Material Processing. Based on End-user, the market is segmented into Ore & Mineral Processing and Cement. Based on Application, the market is segmented into Diamond Liberation, Pellet Feed Preparation, Precious Metal Beneficiation, and Base Metal Liberation. Based on countries, the market is segmented into China, Japan, India, South Korea, Singapore, Malaysia, and Rest of Asia Pacific.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include ABB Group, SGS S.A., Thyssenkrupp AG (Polysius AG), FLSmidth & Co. A/S, Metso Outotec Corporation, Citic Heavy Industries Co Ltd (CITIC Limited), AGICO, s.r.o., Shanghai Zenith Minerals Co., Ltd, KHD Humboldt Wedag International AG and Maschinenfabrik Köppern GmbH & Co. KG
Scope of the Study
By Type
- Non-Ferrous Material Processing
- Ferrous Material Processing
By End-user
- Ore & Mineral Processing
- Cement
By Application
- Diamond Liberation
- Pellet Feed Preparation
- Precious Metal Beneficiation
- Base Metal Liberation
By Country
- China
- Japan
- India
- South Korea
- Singapore
- Malaysia
- Rest of Asia Pacific
Key Market Players
List of Companies Profiled in the Report:
- ABB Group
- SGS S.A.
- Thyssenkrupp AG (Polysius AG)
- FLSmidth & Co. A/S
- Metso Outotec Corporation
- Citic Heavy Industries Co Ltd (CITIC Limited)
- AGICO, s.r.o.
- Shanghai Zenith Minerals Co., Ltd
- KHD Humboldt Wedag International AG
- Maschinenfabrik Köppern GmbH & Co. KG
Unique Offerings
- Exhaustive coverage
- The highest number of market tables and figures
- Subscription-based model available
- Guaranteed best price
- Assured post sales research support with 10% customization free
Table of Contents
Chapter 1. Market Scope & Methodology
Chapter 2. Market Overview
Chapter 3. Asia Pacific High Pressure Grinding Roller (HPGR) Market by Type
Chapter 4. Asia Pacific High Pressure Grinding Roller (HPGR) Market by End-User
Chapter 5. Asia Pacific High Pressure Grinding Roller (HPGR) Market by Application
Chapter 6. Asia Pacific High Pressure Grinding Roller (HPGR) Market by Country
Chapter 7. Company Profiles
Companies Mentioned
- ABB Group
- SGS S.A.
- Thyssenkrupp AG (Polysius AG)
- FLSmidth & Co. A/S
- Metso Outotec Corporation
- Citic Heavy Industries Co Ltd (CITIC Limited)
- AGICO, s.r.o.
- Shanghai Zenith Minerals Co., Ltd
- KHD Humboldt Wedag International AG
- Maschinenfabrik Köppern GmbH & Co. KG
Methodology
LOADING...
