The North America High Pressure Grinding Roller (HPGR) Market should witness market growth of 4.2% CAGR during the forecast period (2022-2028).
Rolls, bearings, frames, pressure beams, hydraulic systems, the driving system, lubricating and cooling systems, and the feed conveyor are the machine's primary components. The feed is delivered into the space between the rollers in a choke-feed fashion, and it is pulverized by an interparticle-breaking mechanism. Feed is coarser than the size of the gap created by nipping. The pressure applied to the rollers determines the degree of comminution accomplished.
The pressures in the void may range between 50 and 250 M pa. Depending on the diameter of the rollers, forces range between 750 and 20,000 kN (75 - 2000 too). For orienting purposes, the compression strength of the vast majority of hard ores varies between 180 and 240 MPa. Typically, the force required to break apart particles 60 mm is 100 kN. Roll diameters range between 0.5 m and 2.8 m, and roll widths range between 0.2 m and 1.8 m. The highest L/D ratio suggested for hard ores is 0.7:1.
The L/D ratio has a significant impact on the mechanical component qualities, drive system configuration, the performance of the rolls, and the wear life of the liners. Capacity ranges from 20 to over 2500 tph. Motor power, ranging from 2 x 50 kW to 2 × 3000 kW. The rolls are shielded from wear by thick, wear-resistant liners, and the ore within the rollers is confined by cheek plates. Shrink-fitted tires with tungsten carbide studs are the ideal liners for hard, abrasive ores.
The depth of the liners, cheek plates, types of studs utilized, and the ease with which these parts may be replaced vary by manufacturer. In some instances, it may be desirable to use rock boxes rather than cheek plates when mining extremely abrasive ores, however, these instances are becoming less frequent due to the introduction of specialized new side protection devices.
North America, which comprises the United States and Canada, is a significant contributor to the smart mining market for linked mining. The United States mining industry comprises the beneficiation, extraction, and processing of solid minerals found in the ground. Minerals consist of industrial minerals like potash, limestone, and other broken rocks, coal, and metals like iron, copper, or zinc. In the United States, metals and other minerals are key raw resources for the construction and chemical industries, as well as the creation of daily electronics and consumer goods.
The US market dominated the North America High Pressure Grinding Roller (HPGR) Market by Country in 2021; thereby, achieving a market value of $108.6 million by 2028. The Canada market is experiencing a CAGR of 6.1% during (2022-2028). Additionally, The Mexico market would exhibit a CAGR of 5.9% during (2022-2028).
Based on Type, the market is segmented into Non-Ferrous Material Processing and Ferrous Material Processing. Based on End-user, the market is segmented into Ore & Mineral Processing and Cement. Based on Application, the market is segmented into Diamond Liberation, Pellet Feed Preparation, Precious Metal Beneficiation, and Base Metal Liberation. Based on countries, the market is segmented into U.S., Mexico, Canada, and Rest of North America.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include ABB Group, SGS S.A., Thyssenkrupp AG (Polysius AG), FLSmidth & Co. A/S, Metso Outotec Corporation, Citic Heavy Industries Co Ltd (CITIC Limited), AGICO, s.r.o., Shanghai Zenith Minerals Co., Ltd, KHD Humboldt Wedag International AG and Maschinenfabrik Köppern GmbH & Co. KG
Rolls, bearings, frames, pressure beams, hydraulic systems, the driving system, lubricating and cooling systems, and the feed conveyor are the machine's primary components. The feed is delivered into the space between the rollers in a choke-feed fashion, and it is pulverized by an interparticle-breaking mechanism. Feed is coarser than the size of the gap created by nipping. The pressure applied to the rollers determines the degree of comminution accomplished.
The pressures in the void may range between 50 and 250 M pa. Depending on the diameter of the rollers, forces range between 750 and 20,000 kN (75 - 2000 too). For orienting purposes, the compression strength of the vast majority of hard ores varies between 180 and 240 MPa. Typically, the force required to break apart particles 60 mm is 100 kN. Roll diameters range between 0.5 m and 2.8 m, and roll widths range between 0.2 m and 1.8 m. The highest L/D ratio suggested for hard ores is 0.7:1.
The L/D ratio has a significant impact on the mechanical component qualities, drive system configuration, the performance of the rolls, and the wear life of the liners. Capacity ranges from 20 to over 2500 tph. Motor power, ranging from 2 x 50 kW to 2 × 3000 kW. The rolls are shielded from wear by thick, wear-resistant liners, and the ore within the rollers is confined by cheek plates. Shrink-fitted tires with tungsten carbide studs are the ideal liners for hard, abrasive ores.
The depth of the liners, cheek plates, types of studs utilized, and the ease with which these parts may be replaced vary by manufacturer. In some instances, it may be desirable to use rock boxes rather than cheek plates when mining extremely abrasive ores, however, these instances are becoming less frequent due to the introduction of specialized new side protection devices.
North America, which comprises the United States and Canada, is a significant contributor to the smart mining market for linked mining. The United States mining industry comprises the beneficiation, extraction, and processing of solid minerals found in the ground. Minerals consist of industrial minerals like potash, limestone, and other broken rocks, coal, and metals like iron, copper, or zinc. In the United States, metals and other minerals are key raw resources for the construction and chemical industries, as well as the creation of daily electronics and consumer goods.
The US market dominated the North America High Pressure Grinding Roller (HPGR) Market by Country in 2021; thereby, achieving a market value of $108.6 million by 2028. The Canada market is experiencing a CAGR of 6.1% during (2022-2028). Additionally, The Mexico market would exhibit a CAGR of 5.9% during (2022-2028).
Based on Type, the market is segmented into Non-Ferrous Material Processing and Ferrous Material Processing. Based on End-user, the market is segmented into Ore & Mineral Processing and Cement. Based on Application, the market is segmented into Diamond Liberation, Pellet Feed Preparation, Precious Metal Beneficiation, and Base Metal Liberation. Based on countries, the market is segmented into U.S., Mexico, Canada, and Rest of North America.
The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include ABB Group, SGS S.A., Thyssenkrupp AG (Polysius AG), FLSmidth & Co. A/S, Metso Outotec Corporation, Citic Heavy Industries Co Ltd (CITIC Limited), AGICO, s.r.o., Shanghai Zenith Minerals Co., Ltd, KHD Humboldt Wedag International AG and Maschinenfabrik Köppern GmbH & Co. KG
Scope of the Study
By Type
- Non-Ferrous Material Processing
- Ferrous Material Processing
By End-user
- Ore & Mineral Processing
- Cement
By Application
- Diamond Liberation
- Pellet Feed Preparation
- Precious Metal Beneficiation
- Base Metal Liberation
By Country
- US
- Canada
- Mexico
- Rest of North America
Key Market Players
List of Companies Profiled in the Report:
- ABB Group
- SGS S.A.
- Thyssenkrupp AG (Polysius AG)
- FLSmidth & Co. A/S
- Metso Outotec Corporation
- Citic Heavy Industries Co Ltd (CITIC Limited)
- AGICO, s.r.o.
- Shanghai Zenith Minerals Co., Ltd
- KHD Humboldt Wedag International AG
- Maschinenfabrik Köppern GmbH & Co. KG
Unique Offerings
- Exhaustive coverage
- The highest number of market tables and figures
- Subscription-based model available
- Guaranteed best price
- Assured post sales research support with 10% customization free
Table of Contents
Chapter 1. Market Scope & Methodology
Chapter 2. Market Overview
Chapter 3. North America High Pressure Grinding Roller (HPGR) Market by Type
Chapter 4. North America High Pressure Grinding Roller (HPGR) Market by End-User
Chapter 5. North America High Pressure Grinding Roller (HPGR) Market by Application
Chapter 6. North America High Pressure Grinding Roller (HPGR) Market by Country
Chapter 7. Company Profiles
Companies Mentioned
- ABB Group
- SGS S.A.
- Thyssenkrupp AG (Polysius AG)
- FLSmidth & Co. A/S
- Metso Outotec Corporation
- Citic Heavy Industries Co Ltd (CITIC Limited)
- AGICO, s.r.o.
- Shanghai Zenith Minerals Co., Ltd
- KHD Humboldt Wedag International AG
- Maschinenfabrik Köppern GmbH & Co. KG
Methodology
LOADING...
