Handbook of Foaming and Blowing Agents, 2nd Edition

The second edition of the Handbook of Foaming and Blowing Agents includes the most current information on these additives, which has been published between 2017 and 2021 in the open literature, scientific papers, and patents to complement already included information in the previous edition.

Foaming processes can be controlled by many parameters, such as the type and amount of foaming agent, additives, saturation pressure, desorption time, die pressure, die temperature, feed ratio, gas contents, its flow rate and injection location, internal pressure after foaming, mold pressure, mold temperature, the viscosity of composition under processing conditions, surface tension, time-temperature regime, and many other diverse factors. 

The selection of formulation depends on the mechanisms of action of blowing agents and foaming mechanisms, as well as the dispersion and solubility of foaming agents and foam stabilization requirements.

This book contains information on foaming technology, which has been discussed in fourteen chapters, each devoted to a different aspect of foaming processes.

Properties of 23 groups of blowing agents have been discussed in Chapter 2. The typical range of technical performance is given for each group of foaming agents in the tabulated form, including general properties, physical-chemical properties, health and safety, environmental impact, and application in different products and polymers. This information was compiled based on data for over 300 commercial additives. Here, average values for each group were included, unlike in the Databook of Blowing and Auxiliary Agents, where full information for individual additives is presented.

Chapter 3 discusses foaming mechanisms with the use of solid blowing agents, which are decomposed to the gaseous products by application of heat, production of gaseous products by chemical reaction, and foaming by gasses and evaporating liquids. All information is illustrated by chemical reactions and diagrams placed close to the text of the discussion.

Dispersion of solid foaming agents and solubility of liquid and gaseous products is the subject of Chapter 4, emphasizing the uniformity of foam produced and the foaming process's parameters. Evaluation of the importance of parameters of foaming, included in chapter 5, contains the influence of the amount of blowing agent, clamping pressure, delay time, desorption time, die pressure, die temperature, gas content, gas flow rate, gas injection location, gas sorption and desorption rates, internal pressure after foaming, mold pressure, mold temperature, operational window, plastisol viscosity, saturation pressure, saturation temperature, screw revolution speed, surface tension, time, temperature, and void volume. 

Foam stabilization methods for different blowing agents are included in Chapter 6. These methods help to obtain the uniform structure of the foam and reinforce cell walls. Seven different, most frequently used foam efficiency measures are presented in Chapter 7. Morphology of foams is discussed in Chapter 8, including the production of bimodal foams, cell density, cell morphology, cell size, cell wall thickness, closed and open cell formation and frequency, core and skin thickness, and morphological features.

Production of foam by different methods of plastic processing, such as blown film extrusion, calendering, clay exfoliation in the production of reinforced composites, compression molding, depressurization, extrusion, free foaming, injection molding, microwave heating, rotational molding, solid-state foaming, supercritical fluid-laden pellet injection molding foaming, thermoforming, UV laser, vacuum drying, and wire coating is discussed in Chapter 9.

The selection of foaming agents, their quantity, and the technology of processing for 44 polymers are included in Chapter 10. Chapter 11 discusses the influence of 15 groups of additives on the foaming outcome. Chapter 12 gives information on the effect of foaming on 24 parameters of physical-mechanical properties of foams, setting the standard of achievable performance. Some important and exclusive analytical techniques useful in foaming are discussed in Chapter 13. In the last chapter, the health and safety, and environmental impacts of foaming processes are discussed. 

This book also has a companion Databook of Blowing and Auxiliary Agents, which contains data for these diverse chemical components of formulations of foamed materials and reveals their roles in foaming processes. There is no information, which is repeated in both books. They do compliment each other giving readers comprehensive information on the subject never published before with such breadth.