Aerospace & Defense C-class Parts - Global Stategic Business Report

The global market for Aerospace & Defense C-class Parts was estimated at US$13.4 Billion in 2024 and is projected to reach US$16.7 Billion by 2030, growing at a CAGR of 3.8% from 2024 to 2030. This comprehensive report provides an in-depth analysis of market trends, drivers, and forecasts, helping you make informed business decisions. The report includes the most recent global tariff developments and how they impact the Aerospace & Defense C-class Parts market.

Global 'Aerospace & Defense C-Class Parts' Market - Key Trends & Drivers Summarized

Why Are C-Class Parts The Hidden Backbone Of Aerospace & Defense Systems?

In the complex machinery of aerospace and defense, C-class parts may be small in size, but they are colossal in importance. These components - which include fasteners, clips, brackets, seals, cable ties, washers, rivets, springs, and gaskets - account for over 70% of all aircraft parts by volume, even though they contribute only a fraction to the total cost. Their role in ensuring the structural integrity, functionality, and reliability of aircraft and defense platforms is critical. Every subsystem, from avionics to fuselage assembly, relies on these tiny yet indispensable parts. Their availability, traceability, and compliance with strict aerospace standards are essential for mission success and flight safety. In defense operations, the uninterrupted supply of certified C-class parts is vital for the readiness of vehicles, missiles, radars, and communication systems. Though often overlooked, their precision engineering, material quality, and lifecycle documentation are under constant scrutiny. Whether it`s resisting corrosion in extreme altitudes or tolerating intense thermal cycling in jet engines, the performance of C-class components is integral to operational excellence in this sector.

How Are Digitalization And Smart Logistics Redefining C-Class Part Management?

The aerospace and defense sector is undergoing a digital transformation that is profoundly changing how C-class parts are sourced, tracked, and managed. Supply chain complexity is being tamed through advanced inventory systems, RFID tagging, and blockchain-led traceability, which allow real-time tracking of even the smallest component. Digital twins and predictive maintenance software now integrate C-class part data into larger asset management platforms, helping anticipate part wear and replacement schedules before failure occurs. AI-powered procurement platforms are optimizing part sourcing based on cost, lead times, and supplier performance. Additive manufacturing is beginning to be explored for the on-demand production of certain non-critical C-class parts, offering flexibility in isolated military bases or aerospace hubs. Cloud-based part cataloging and digital quality assurance systems are replacing manual logs, ensuring faster certification and compliance documentation. As aircraft and defense systems become more intelligent, the expectation is that even C-class parts will come embedded with sensors or smart coatings to monitor stress, heat, or vibration. These developments are revolutionizing MRO (maintenance, repair, and overhaul) logistics while enhancing fleet availability and lifecycle support.

What Role Do Regulations, Standardization, And Quality Assurance Play In This Market?

Aerospace and defense are among the most tightly regulated industries in the world, and C-class parts must meet rigorous standards to ensure safety, reliability, and interoperability. Compliance with AS9100, NADCAP, ISO 9001, and ITAR regulations is mandatory for all manufacturers and suppliers. Military specifications (MIL-SPECs) further dictate exacting tolerances, testing procedures, and approved materials for defense applications. As such, quality control is paramount - C-class parts are subject to dimensional inspections, non-destructive testing, and material traceability protocols. Any deviation or counterfeit component can result in catastrophic failure, grounding of fleets, or massive recalls. Governments and OEMs are enforcing stricter sourcing guidelines to prevent supply chain infiltration, especially amid rising geopolitical tensions. Supplier audits, digital part certificates, and serialized tracking systems are being widely adopted. Global defense agencies are also mandating domestic sourcing and dual-use certifications, leading to regional shifts in supplier networks. As sustainability becomes a priority, standards are evolving to encourage the use of recyclable materials and low-carbon manufacturing processes even in these seemingly minor components. The role of regulation in this market is not just about compliance - it`s a strategic necessity for risk mitigation and operational continuity.

The Growth In The Aerospace & Defense C-Class Parts Market Is Driven By Several Factors…

…including the rapid expansion of commercial aviation fleets, rising global defense spending, and increasing aircraft modernization and MRO activities. As both commercial and military aircraft production rises to meet post-pandemic travel demand and regional security objectives, the need for a steady flow of certified C-class parts is escalating. The growing trend of aircraft fleet renewal, particularly in the U.S., China, and India, is boosting demand for high-spec parts used in next-generation platforms. Defense budgets across NATO countries and Indo-Pacific regions are being directed toward fleet upgrades, new aircraft procurement, and advanced system retrofitting - all of which require extensive C-class part consumption. On the aftermarket side, rising flight hours and aging airframes are fueling growth in maintenance and part replacement cycles. Furthermore, OEMs are increasingly outsourcing C-class parts to specialized suppliers or third-party logistics providers (3PLs) to reduce cost and improve efficiency. Trends in consumer air travel, such as increased regional connectivity and low-cost carrier expansion, are also driving demand indirectly. Aerospace digitization is encouraging predictive part replacement, boosting part turnover and recurring procurement. Altogether, the sector’s sustained growth, paired with the complexity of operational environments, is cementing C-class parts as strategic assets in aerospace and defense supply chains.

Report Scope

The report analyzes the Aerospace & Defense C-class Parts market, presented in terms of market value (US$ Thousand). The analysis covers the key segments and geographic regions outlined below.

Segments: Component (Fastener Components, Bearing Components, Electrical Components, Machined Parts Components); Application (Airframe Application, Interiors Application, Engine Application, Systems Application)

Geographic Regions/Countries: World; United States; Canada; Japan; China; Europe (France; Germany; Italy; United Kingdom; Spain; Russia; and Rest of Europe); Asia-Pacific (Australia; India; South Korea; and Rest of Asia-Pacific); Latin America (Argentina; Brazil; Mexico; and Rest of Latin America); Middle East (Iran; Israel; Saudi Arabia; United Arab Emirates; and Rest of Middle East); and Africa.

Key Insights:

• Market Growth: Understand the significant growth trajectory of the Fastener Components segment, which is expected to reach US$8.1 Billion by 2030 with a CAGR of a 4.5%. The Bearing Components segment is also set to grow at 3.7% CAGR over the analysis period.
• Regional Analysis: Gain insights into the U.S. market, estimated at $3.6 Billion in 2024, and China, forecasted to grow at an impressive 7.1% CAGR to reach $3.4 Billion by 2030. Discover growth trends in other key regions, including Japan, Canada, Germany, and the Asia-Pacific.

Why You Should Buy This Report:

• Detailed Market Analysis: Access a thorough analysis of the Global Aerospace & Defense C-class Parts Market, covering all major geographic regions and market segments.
• Competitive Insights: Get an overview of the competitive landscape, including the market presence of major players across different geographies.
• Future Trends and Drivers: Understand the key trends and drivers shaping the future of the Global Aerospace & Defense C-class Parts Market.
• Actionable Insights: Benefit from actionable insights that can help you identify new revenue opportunities and make strategic business decisions.

Key Questions Answered:

• How is the Global Aerospace & Defense C-class Parts Market expected to evolve by 2030?
• What are the main drivers and restraints affecting the market?
• Which market segments will grow the most over the forecast period?
• How will market shares for different regions and segments change by 2030?
• Who are the leading players in the market, and what are their prospects?

Report Features:

• Comprehensive Market Data: Independent analysis of annual sales and market forecasts in US$ Million from 2024 to 2030.
• In-Depth Regional Analysis: Detailed insights into key markets, including the U.S., China, Japan, Canada, Europe, Asia-Pacific, Latin America, Middle East, and Africa.
• Company Profiles: Coverage of players such as Amphenol Corporation, Arconic Corporation, BAE Systems PLC, LiSi Group, Lockheed Martin Corporation and more.
• Complimentary Updates: Receive free report updates for one year to keep you informed of the latest market developments.

Select Competitors (Total 34 Featured):

• Amphenol Corporation
• Arconic Corporation
• BAE Systems PLC
• LiSi Group
• Lockheed Martin Corporation
• NTN Corporation
• Precision Castparts Corporation
• RBC Bearings Incorporated
• Safran SA
• SKF Group
• Thales Group
• Triumph Group

Tariff Impact Analysis: Key Insights for 2025

Global tariff negotiations across 180+ countries are reshaping supply chains, costs, and competitiveness. This report reflects the latest developments as of April 2025 and incorporates forward-looking insights into the market outlook.

The analysts continuously track trade developments worldwide, drawing insights from leading global economists and over 200 industry and policy institutions, including think tanks, trade organizations, and national economic advisory bodies. This intelligence is integrated into forecasting models to provide timely, data-driven analysis of emerging risks and opportunities.

What’s Included in This Edition:

• Tariff-adjusted market forecasts by region and segment
• Analysis of cost and supply chain implications by sourcing and trade exposure
• Strategic insights into geographic shifts

Buyers receive a free July 2025 update with:

• Finalized tariff impacts and new trade agreement effects
• Updated projections reflecting global sourcing and cost shifts
• Expanded country-specific coverage across the industry