+353-1-416-8900REST OF WORLD
+44-20-3973-8888REST OF WORLD
1-917-300-0470EAST COAST U.S
1-800-526-8630U.S. (TOLL FREE)

Geometrical Dimensioning and Tolerancing for Design, Manufacturing and Inspection. A Handbook for Geometrical Product Specification Using ISO and ASME Standards. Edition No. 3

  • Book

  • November 2020
  • Elsevier Science and Technology
  • ID: 5117746

Geometrical Dimensioning and Tolerancing for Design, Manufacturing and Inspection: A Handbook for Geometrical Product Specification Using ISO and ASME Standards, Third Edition presents the state-of-the art in geometrical dimensioning and tolerancing. The book describes the international standardization in this field while also indicating how it differs from the American Standard ASME Y14.5M. The general principles of geometric dimensioning and tolerancing are described, helping users define precision-related specifications unambiguously and consistently with the constraints of the manufacturing and inspection processes. Principles for the inspection of geometrical deviations are given, along with a basis for tolerancing suitable for inspection.

Since publication of the second edition of this book in 2006 more than ten ISO GPS standards have been revised, involving the introduction of new symbols and concepts, and in many cases default interpretation of the tolerance indicators have changed, in addition two new versions of American standard ASME Y14.5 (2009 and 2018) have appeared. This book is an ideal introduction to geometrical dimensioning and tolerancing for students, and an essential reference for researchers and practitioners in the fields of design, manufacturing and inspection.

Please Note: This is an On Demand product, delivery may take up to 11 working days after payment has been received.

Table of Contents

1. Properties of the Surface 2. Principles of Tolerancing 3. Principles of Geometrical Tolerancing 4. Profile Tolerancing 5. Tolerancing of Cones 6. Positional Tolerancing 7. Tolerancing of Edges 8. Projected Tolerance Zone 9. Substitute Elements 10. Maximum Material Requirement 11. Envelope Requirement 12. Least Material Requirement 13. Tolerancing of Flexible Parts 14. Tolerance chains (accumulation of tolerances) 15. Statistical Tolerancing 16. Respecting Geometrical Tolerances During Manufacturing 17. General Geometrical Tolerances 18. Inspection of Geometrical Deviations 19. Function Related, Manufacturing Related, Inspection Related Geometrical Tolerancing 20. Examples of Geometrical Tolerancing 21. Differences Between ISO/ANSI/BS and Other Standards 22. Synopsis of ISO-Standards

Authors

Georg Henzold Former Deputy Director, Siemens AG; Member of ISO GPS Steering Committee, Germany. Georg Henzold spent many years as manager of the department for standardization of a manufacturer for power plant machinery. He was also a longstanding chairman of the committee dealing with the standardization in the field of geometrical dimensioning and tolerancing in the German Standardization Institute DIN, and in the European Committee for Standardization CEN. He is a long-time delegate in the pertinent committees of the International Standardization Organization ISO.